Street Racing & Kill Stories Basic Technical Questions & Advice

Nick.H @ the track

Thread Tools
 
Search this Thread
 
Old Mar 21, 2015 | 04:36 PM
  #81  
MACHXLR8's Avatar
Teching In
 
Joined: Dec 2006
Posts: 1
Likes: 2
From: North Carolina
Default

Nice job!
Can't wait to see the vid or at least a play-by-play

Last edited by MACHXLR8; Mar 21, 2015 at 04:43 PM.
Reply
Old Mar 21, 2015 | 04:47 PM
  #82  
Nick.H's Avatar
Thread Starter
On The Tree
10 Year Member
Liked
 
Joined: May 2013
Posts: 136
Likes: 15
From: Dirty D, CA
Default

Okay so to sum things up I cant drive. Period. I can't 60ft and my stock clutch gets so hot that it wont let me shift, it'll keep me out of gear when I try to. So that being said the times were awful. Same with the MPH. I lost ET and trap to the 5.0 every time (it was best 2 out of 3) but we were racing for win light. I got it both times. Got PO'd about my shitty times and traps so I threw the slips out the window on the 8 freeway. I know cobro and the 5.0 guy have them. I cut a .15x RT if I remember right. 5.0 went low 8's at 88-89 with a best 60' of like 1.9x I think
Reply
Old Mar 21, 2015 | 05:02 PM
  #83  
MACHXLR8's Avatar
Teching In
 
Joined: Dec 2006
Posts: 1
Likes: 2
From: North Carolina
Default

Originally Posted by Nick.H
Okay so to sum things up I cant drive. Period. I can't 60ft and my stock clutch gets so hot that it wont let me shift, it'll keep me out of gear when I try to. So that being said the times were awful. Same with the MPH. I lost ET and trap to the 5.0 every time (it was best 2 out of 3) but we were racing for win light. I got it both times. Got PO'd about my shitty times and traps so I threw the slips out the window on the 8 freeway. I know cobro and the 5.0 guy have them. I cut a .15x RT if I remember right. 5.0 went low 8's at 88-89 with a best 60' of like 1.9x I think
No worries, man. You are not the only one that can't drive. I suck at it also. It is actually more difficult than most people make it out to be especially with having a manual. It takes a good amount of practice and "most" of us do not put in the time needed at the track to become proficient at it.
Just take comfort in knowing that not only did you beat him to the light on each race but that your car has the power and ability to run a good time, it will just take the driver mod to do it.
Reply
Old Mar 21, 2015 | 05:22 PM
  #84  
HioSSilver's Avatar
10 Second Club
20 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Aug 2002
Posts: 6,129
Likes: 644
From: Winchester, VA
Default

You suck nick! But alteast you didn't suck as bad as the other guy
Reply
Old Mar 21, 2015 | 05:30 PM
  #85  
big hammer's Avatar
10 Second Club
15 Year Member
Top Answer: 1
 
Joined: May 2009
Posts: 3,427
Likes: 226
From: over dere
Default

Originally Posted by Nick.H
Okay so to sum things up I cant drive. Period. I can't 60ft and my stock clutch gets so hot that it wont let me shift, it'll keep me out of gear when I try to. So that being said the times were awful. Same with the MPH. I lost ET and trap to the 5.0 every time (it was best 2 out of 3) but we were racing for win light. I got it both times. Got PO'd about my shitty times and traps so I threw the slips out the window on the 8 freeway. I know cobro and the 5.0 guy have them. I cut a .15x RT if I remember right. 5.0 went low 8's at 88-89 with a best 60' of like 1.9x I think
No worries man. Pencil in a better clutch, gears and intake. It'll be night And day. The stock clutch hydraulics are actually fine. You don't need to change those.
Reply
Old Mar 21, 2015 | 05:55 PM
  #86  
odthetruth's Avatar
TECH Resident
10 Year Member
iTrader: (4)
 
Joined: Oct 2011
Posts: 818
Likes: 2
From: heading South East on Bakalakadaka street
Default

Nick... Interested in running in the Loser Eats Crow competition? Will ran one on LS1tech last year. He's trying to gauge interest in it.

In case you want to know more on the competition:
https://ls1tech.com/forums/dyno-gues...challenge.html

Trying to gauge interest on it. I mentioned it in the BS thread in case ya didnt see it.
Reply
Old Mar 21, 2015 | 05:59 PM
  #87  
Blown383LS1's Avatar
On The Tree
15 Year Member
Photogenic
Liked
iTrader: (23)
 
Joined: Oct 2007
Posts: 108
Likes: 14
Default

What did you trap?
Reply
Old Mar 21, 2015 | 06:04 PM
  #88  
marc97taws6's Avatar
TECH Fanatic
iTrader: (6)
 
Joined: Sep 2008
Posts: 1,433
Likes: 0
From: DSM
Default

So the Bro was quicker and faster but asleep at the line.

Cliff notes noted.
Reply
Old Mar 21, 2015 | 06:18 PM
  #89  
Nick.H's Avatar
Thread Starter
On The Tree
10 Year Member
Liked
 
Joined: May 2013
Posts: 136
Likes: 15
From: Dirty D, CA
Default

Originally Posted by big hammer
No worries man. Pencil in a better clutch, gears and intake. It'll be night And day. The stock clutch hydraulics are actually fine. You don't need to change those.
Yeah I just need to save up for a while. Next mods are MAF, ls6 intake, fixing my rear main seal leak lol, clutch and MGW shifter
Originally Posted by Blown383LS1
What did you trap?
somewhere around 83.xx
Reply
Old Mar 21, 2015 | 06:20 PM
  #90  
Nick.H's Avatar
Thread Starter
On The Tree
10 Year Member
Liked
 
Joined: May 2013
Posts: 136
Likes: 15
From: Dirty D, CA
Default

Originally Posted by odthetruth
Nick... Interested in running in the Loser Eats Crow competition? Will ran one on LS1tech last year. He's trying to gauge interest in it.

In case you want to know more on the competition:
https://ls1tech.com/forums/dyno-gues...challenge.html

Trying to gauge interest on it. I mentioned it in the BS thread in case ya didnt see it.
I don't go to the track enough. Or have money to buy things for people when I lose
Reply
Old Mar 21, 2015 | 06:30 PM
  #91  
islander033's Avatar
7 Second Club
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2013
Posts: 240
Likes: 404
From: Crossfield, AB
Default

Good kill Nicky!
Reply
Old Mar 21, 2015 | 06:53 PM
  #92  
Nick.H's Avatar
Thread Starter
On The Tree
10 Year Member
Liked
 
Joined: May 2013
Posts: 136
Likes: 15
From: Dirty D, CA
Default

as promised, videos of me going painfully slow. And hating every second of it. And wanting to sell my car.
Reply
Old Mar 21, 2015 | 06:59 PM
  #93  
HioSSilver's Avatar
10 Second Club
20 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Aug 2002
Posts: 6,129
Likes: 644
From: Winchester, VA
Default

What all mods did the 5br0 show up with nick?

You should've been able to go threw the traps in 2nd gear i would think nick. Stock 3.42 gear and any kind if extended rpm range at all should just about do 83mph.


Anyone have a good gear calc? It seems fbody.org/gears is down.
Reply
Old Mar 21, 2015 | 07:01 PM
  #94  
98CayenneT/A's Avatar
TECH Junkie
10 Year Member
Photogenic
Liked
Loved
 
Joined: Nov 2013
Posts: 3,913
Likes: 366
From: White Bear, Mn
Default

Originally Posted by Nick.H
Camaro vs Mustang barona drag strip - YouTube
as promised, videos of me going painfully slow. And hating every second of it. And wanting to sell my car.
Nice run, if you sell your car get a Trans Am, there faster
Reply
Old Mar 21, 2015 | 07:04 PM
  #95  
98CayenneT/A's Avatar
TECH Junkie
10 Year Member
Photogenic
Liked
Loved
 
Joined: Nov 2013
Posts: 3,913
Likes: 366
From: White Bear, Mn
Default

Originally Posted by HioSSilver
What all mods did the 5br0 show up with nick?

You should've been able to go threw the traps in 2nd gear i would think nick. Stock 3.42 gear and any kind if extended rpm range at all should just about do 83mph.


Anyone have a good gear calc? It seems fbody.org/gears is down.
http://www.dragtimes.com/gear-ratio-...-mph-speed.php
Reply
Old Mar 21, 2015 | 07:06 PM
  #96  
Nick.H's Avatar
Thread Starter
On The Tree
10 Year Member
Liked
 
Joined: May 2013
Posts: 136
Likes: 15
From: Dirty D, CA
Default

Originally Posted by HioSSilver
What all mods did the 5br0 show up with nick?

You should've been able to go threw the traps in 2nd gear i would think nick. Stock 3.42 gear and any kind if extended rpm range at all should just about do 83mph.


Anyone have a good gear calc? It seems fbody.org/gears is down.
I tried that. tapped the rev limiter ~ 50-60ft before the traps. He had axelback, cat delete, h pipe, cai and bama tune
Originally Posted by 98CayenneT/A
Nice run, if you sell your car get a Trans Am, there faster
If I sold my car I'd buy a new Fiesta ST and save money until I could afford a C5Z, and I'd do that mf'r right
Reply
Old Mar 21, 2015 | 07:09 PM
  #97  
HioSSilver's Avatar
10 Second Club
20 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Aug 2002
Posts: 6,129
Likes: 644
From: Winchester, VA
Default

Originally Posted by 98CayenneT/A
Nice run, if you sell your car get a Trans Am, there faster
LIES!!
Originally Posted by 98CayenneT/A
Thanks
Originally Posted by Nick.H
I tried that. tapped the rev limiter ~ 50-60ft before the traps

If I sold my car I'd buy a new Fiesta ST and save money until I could afford a C5Z, and I'd do that mf'r right
Where's your limiter set?
Reply
Old Mar 21, 2015 | 07:09 PM
  #98  
Riddle0288's Avatar
On The Tree
 
Joined: Jan 2014
Posts: 107
Likes: 0
From: Richmond, Mi
Default

Congrats dude.. and come on dont beat ur self up.. u still beat him and ur car still has alot of potential. it has a small cam, stock clutch And stock gearing.... Go with a cheap ls7 clutch and some gears, with some suspension goodies Thats thing could b night and day different
Reply
Old Mar 21, 2015 | 07:16 PM
  #99  
HioSSilver's Avatar
10 Second Club
20 Year Member
Liked
Loved
Community Favorite
iTrader: (8)
 
Joined: Aug 2002
Posts: 6,129
Likes: 644
From: Winchester, VA
Default

I wouldn't wasted the effort to spit on a ls7 clutch.
Reply
Old Mar 21, 2015 | 07:29 PM
  #100  
Nick.H's Avatar
Thread Starter
On The Tree
10 Year Member
Liked
 
Joined: May 2013
Posts: 136
Likes: 15
From: Dirty D, CA
Default

Originally Posted by HioSSilver

Where's your limiter set?
about 6300-6400
Originally Posted by HioSSilver
I wouldn't wasted the effort to spit on a ls7 clutch.
You have a clutch you'd recommend?
Reply



All times are GMT -5. The time now is 07:21 AM.