Bolt on Mach 1 destroys bolt on LS1 Z28
#383
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Wow. I figure rockers as a bolt on & don't give a half a **** what someone else says. Who really cares? I saw a 5.0 at the track once idling with a lump. I asked if he had cams. "Nope thats just from the tune". If you can change your valve events electronically you must feel pretty special. Great. Where are the valves/cams/electric ****? Inside the motor. Changing their operation from stock...no bolt on right? Seriously, who ******* cares. Just swapping to a bigger ratio roller rocker may give you 10hp if your lucky. Changing all that valve **** in the ford probably gives you something too.
Carry on.
Carry on.
#384
TECH Enthusiast
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
If it touches the oil, it isn't a bolt on. It's pretty widely accepted that if you are opening up the motor for upgrades, you're past the bolt on stage. Don't really need to read the pointless arguing and **** here that is just regurgitating what you tards have argued about for years.
i only take the valve cover off for them. no timing cover, no damper, no springs, no rockers, nothing, just valve covers and a few bolts per side. they touch oil. bolt on. i'm good.
exhaust cams weren't a bolt on. they required removing the front cover. intake cams are bolt ons by your definition Hammer.
#385
7 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
my intake cams are bolt ons.
i only take the valve cover off for them. no timing cover, no damper, no springs, no rockers, nothing, just valve covers and a few bolts per side. they touch oil. bolt on. i'm good.
exhaust cams weren't a bolt on. they required removing the front cover. intake cams are bolt ons by your definition Hammer.
i only take the valve cover off for them. no timing cover, no damper, no springs, no rockers, nothing, just valve covers and a few bolts per side. they touch oil. bolt on. i'm good.
exhaust cams weren't a bolt on. they required removing the front cover. intake cams are bolt ons by your definition Hammer.
#386
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Depends on how it's done I would say. If you're opening the motor, adding an adjustable cam gear, degreeing the cam and reassembling, then I would say that's definitely out.
If it's done via a tune, I would say not. That is taking advantage of better technology. It's like saying you should be able to use trick flow heads on a 4.6L and call it stock, because the LS1 flows better stock.
If it's done via a tune, I would say not. That is taking advantage of better technology. It's like saying you should be able to use trick flow heads on a 4.6L and call it stock, because the LS1 flows better stock.
#388
7 Second Club
#392
On The Tree
#393
7 Second Club
#394
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Lol.....sw was had.
Yea nick it does a little better under the curve. Probably does even better on a lt1.
You know what puts iron in ironic here??
Sw the badass no rules grudge racer tryin to figure out the rules for bolt ons. Only a democrat coukd be so mislead.
Yea nick it does a little better under the curve. Probably does even better on a lt1.
You know what puts iron in ironic here??
Sw the badass no rules grudge racer tryin to figure out the rules for bolt ons. Only a democrat coukd be so mislead.
Last edited by HioSSilver; 12-19-2016 at 03:17 PM.
#395
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
my intake cams are bolt ons.
i only take the valve cover off for them. no timing cover, no damper, no springs, no rockers, nothing, just valve covers and a few bolts per side. they touch oil. bolt on. i'm good.
exhaust cams weren't a bolt on. they required removing the front cover. intake cams are bolt ons by your definition Hammer.
i only take the valve cover off for them. no timing cover, no damper, no springs, no rockers, nothing, just valve covers and a few bolts per side. they touch oil. bolt on. i'm good.
exhaust cams weren't a bolt on. they required removing the front cover. intake cams are bolt ons by your definition Hammer.
Ok so your bolt on max effort coyotah still made less power than me!
#397
7 Second Club
#398
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I don't make the rules doug, I'm simply repeating them.
#399
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
You're not even repeating them. You're just trolling. Scotty just stuck it in you.....robz aka vetteboy didn't have rockers, he thought his car was a bit over the top to be on the bolt on list. You just repeated misinformation like a dumbass. He's likely not on the list for the same reason the jpc 5br0 isn't on the list.