lucille vs pray tune 6th gen
#281
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
No you didn’t. Your daddy himself said that D isn’t even around to race....therefore he not ready therefore I couldn’t have refused anything. You boy has been in Bahamas since I jumped into the picture, he hasn’t taken a day nor seen his family. His last message to me on June 29 said “let’s se if I’m back...” that was the end of it.
#283
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Negative. Your man was never even in town. Good try. He posted he was coming back on July 31st and never did. Dont expect anything anything less from Hillary followers like you.
My buddy made a post about when the race was happening and DB apologized and said something about some important project going on and he not being able to come back as usual.
My buddy made a post about when the race was happening and DB apologized and said something about some important project going on and he not being able to come back as usual.
#284
TECH Enthusiast
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
OP, the coyote is slower. period. you need a lot more mods. your ported intake manifold nearly matches a CJ in testing. a ported CJ leaves your manifold in the dust. that and monoblade is what its going to take. more power and torque over what you run now. they better be glad you arent running a real manifold also.
#285
TECH Fanatic
iTrader: (13)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Steedas car didn’t pick up very much from theirs. But it was first trip out and I think worse air. They went from 10.71 to 10.63 with converter, drag brakes and cj manifold
if he gets a ported cj this 6gen will need 26 tall drag pack, brakes, msd manifold and c85 for it to be equal mods. But the 6g will still only have a 2.77 rear gear to his 3.55 and taller tranny gears. But then again it’s a little lighter. They are a good matchup
if he gets a ported cj this 6gen will need 26 tall drag pack, brakes, msd manifold and c85 for it to be equal mods. But the 6g will still only have a 2.77 rear gear to his 3.55 and taller tranny gears. But then again it’s a little lighter. They are a good matchup
#287
TECH Enthusiast
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Steedas car didn’t pick up very much from theirs. But it was first trip out and I think worse air. They went from 10.71 to 10.63 with converter, drag brakes and cj manifold
if he gets a ported cj this 6gen will need 26 tall drag pack, brakes, msd manifold and c85 for it to be equal mods. But the 6g will still only have a 2.77 rear gear to his 3.55 and taller tranny gears. But then again it’s a little lighter. They are a good matchup
if he gets a ported cj this 6gen will need 26 tall drag pack, brakes, msd manifold and c85 for it to be equal mods. But the 6g will still only have a 2.77 rear gear to his 3.55 and taller tranny gears. But then again it’s a little lighter. They are a good matchup
#288
10 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Negative. Your man was never even in town. Good try. He posted he was coming back on July 31st and never did. Dont expect anything anything less from Hillary followers like you.
My buddy made a post about when the race was happening and DB apologized and said something about some important project going on and he not being able to come back as usual.
My buddy made a post about when the race was happening and DB apologized and said something about some important project going on and he not being able to come back as usual.
![Icon Lol](https://ls1tech.com/forums/images/smilies2/icon_lol.gif)
so now you’ll roll race him by the sounds of it...
#289
#290
7 Second Club
#291
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
He actually got heated with my buddy when he made a post asking where DB was at, that the friendly run needed to happen.
#292
10 Second Club
iTrader: (8)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Looks like we have liars then...islander and dumMach. Because i remember it exactly as hammer says. BlkMach wanted nothing of rolls and stipped to track only digs to gain a advantage.
That's why this is a issue. Because blkdumMach stipped the runs. If it weren't for that this wouldn't even be a discussion.
That's why this is a issue. Because blkdumMach stipped the runs. If it weren't for that this wouldn't even be a discussion.
#293
7 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Well the crew is know to be liars. Hiollary, Mio, Jake...ect.
ooops
ooops
#298
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
He had service, he saw and didnt respond. He couldve said hey Ill message you in a couple days when Im back in town. Yea....technology is a ****...bet he didnt count on me know I could tell he read it.