Epic SRK B/S thread of 2019
The following users liked this post:
sxc Z28 (06-11-2020)
#6962
Teching In
The following 2 users liked this post by spikestang:
HioSSilver (06-11-2020), sxc Z28 (06-11-2020)
#6963
11 Second Club
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I need a few opinions on some possible upgrades, my car right now is trapping 103 in the 1\8th mile, I would like to trap 105 mph. I am thinking about upgrading my headers from 1 3\4 to either 1 7\8 or 2" , adding a ud pulley, I'm still on the stock balancer, and replacing my slp lid with a ftp 98mm lid , will this get me there? Or am I pissing up a rope? Car is a n\a ls2 f body with a t56.
The following 2 users liked this post by sxc Z28:
HioSSilver (06-11-2020), Mike Morris (06-13-2020)
#6967
Teching In
#6968
Teching In
#6972
Teching In
#6977
10 Second Club
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i had to get longer bolts because I'm running the blower spacers too. The bolts that came with cut are too short. Took week and half to get the correct bolts. But other than that just tuning. if you stay stock injectors you'll run out of fuel real fast. But I have a complete fuel system already done.
#6978
Teching In
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
i had to get longer bolts because I'm running the blower spacers too. The bolts that came with cut are too short. Took week and half to get the correct bolts. But other than that just tuning. if you stay stock injectors you'll run out of fuel real fast. But I have a complete fuel system already done.
#6980
11 Second Club