350z vs LT1 on gas and ls1 with boltons
#1
TECH Fanatic
Thread Starter
Join Date: Dec 2002
Location: htown
Posts: 1,200
Likes: 0
Received 0 Likes
on
0 Posts
350z vs LT1 on gas and ls1 with boltons VIDEO
This has to be one of the most wicked sounding ls1's I have ever heard. Fast as hell too. Anyway these are some pretty nice runs.
http://www.my350z.com/forum/showthread.php?t=223846
http://www.my350z.com/forum/showthread.php?t=223846
Last edited by 25psi; 10-16-2006 at 01:27 PM.
#3
12 Second Club
iTrader: (10)
Join Date: Mar 2003
Location: Sugarland Texas
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
HAHAHA, did that AUTO LS1 really only have bolt-ons! Pretty wimpy LT1 for being sprayed if it gets rolled up by a 330-340rwhp automatic Z28 LS1. How much power did that 350Z make? 350-360?
#5
Teching In
Join Date: Jun 2006
Location: ALBUQUERQUE, NEW MEXICO
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
there is no way that z28 had just bolts! he would not be keeping up with a 350 turbo....no way in hell.....my guess is that the ls1 was cammed with bolts.....a cam is not a bolt on its a bolt in so the video prescreen was wrong.
#6
Teching In
Join Date: Jun 2006
Location: ALBUQUERQUE, NEW MEXICO
Posts: 48
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Sprayed1998
HAHAHA, did that AUTO LS1 really only have bolt-ons! Pretty wimpy LT1 for being sprayed if it gets rolled up by a 330-340rwhp automatic Z28 LS1. How much power did that 350Z make? 350-360?
my guess is that the 350z was pretty close to 450whp with that amount of psi....the z28 was prob making around 430-450 with a cam....
the reason that the z was not pulling him from the go is becasue even if 350's are turbod they are almost next to impossible to brake boost.....my recommendation for the z is to go from a dig=very diffrent result
#7
Banned
iTrader: (3)
Join Date: Mar 2006
Location: Upstate NY
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by camkid
there is no way that z28 had just bolts! he would not be keeping up with a 350 turbo....no way in hell...
It takes some good mods to get them movin. Great thing is, the 3.5 is more than ready to handle 8-12 Psi...
They are bad at putting down power though... When the LS1 raced the LT1 on good pressure, it was dead even. Since the 350Z didn't quite do that, I think thats the reason the guy turned down the pressure, thinkin he could take the 350Z with a little less bottle.
I gotta stick up for the LT1 of course, but its not surprise to me that the 350Z had its hands full, even with a nice Turbo.
Trending Topics
#8
Originally Posted by camkid
my guess is that the 350z was pretty close to 450whp with that amount of psi....the z28 was prob making around 430-450 with a cam....
the reason that the z was not pulling him from the go is becasue even if 350's are turbod they are almost next to impossible to brake boost.....my recommendation for the z is to go from a dig=very diffrent result
the reason that the z was not pulling him from the go is becasue even if 350's are turbod they are almost next to impossible to brake boost.....my recommendation for the z is to go from a dig=very diffrent result
#9
I love posts like that (follow the link). When I run em, even on the street, much more than 1320 feet I'm outta the throttle, those monkeys wondering why you "shut it down early" are idiots.
At the end of the day, he still drives an import...
Just tossing a little "your forum" love your way
At the end of the day, he still drives an import...
Just tossing a little "your forum" love your way
#12
Originally Posted by burnzilla
350Z's are 14 second cars. "sometimes" high 13's.
It takes some good mods to get them movin. Great thing is, the 3.5 is more than ready to handle 8-12 Psi...
They are bad at putting down power though... When the LS1 raced the LT1 on good pressure, it was dead even. Since the 350Z didn't quite do that, I think thats the reason the guy turned down the pressure, thinkin he could take the 350Z with a little less bottle.
I gotta stick up for the LT1 of course, but its not surprise to me that the 350Z had its hands full, even with a nice Turbo.
It takes some good mods to get them movin. Great thing is, the 3.5 is more than ready to handle 8-12 Psi...
They are bad at putting down power though... When the LS1 raced the LT1 on good pressure, it was dead even. Since the 350Z didn't quite do that, I think thats the reason the guy turned down the pressure, thinkin he could take the 350Z with a little less bottle.
I gotta stick up for the LT1 of course, but its not surprise to me that the 350Z had its hands full, even with a nice Turbo.
Not good at putting down power lmao
400whp at 8-9psi is extremely good.
#13
Originally Posted by lukesnyder
Not good at putting down power lmao
400whp at 8-9psi is extremely good.
400whp at 8-9psi is extremely good.
He meant putting it to the ground. (Moving the car, trying to get it to run 13's, trying to find traction, etc.....)
#14
Originally Posted by lukesnyder
He has 410whp just for the record.
for the record, no he dont. i will say one thing, 450+.
i am the LT1 in the vid. i had @800 bottle pressure when i ran the 350.
then when i ran the LS1 i had almost 1100, which is still low for my tune. u can hear it gargling and backfiring when i first hit, then it clears up.
i need to lower the fuel jet, will do that in the near future.
#15
Originally Posted by burnzilla
350Z's are 14 second cars. "sometimes" high 13's.
It takes some good mods to get them movin. Great thing is, the 3.5 is more than ready to handle 8-12 Psi...
They are bad at putting down power though... When the LS1 raced the LT1 on good pressure, it was dead even. Since the 350Z didn't quite do that, I think thats the reason the guy turned down the pressure, thinkin he could take the 350Z with a little less bottle.
I gotta stick up for the LT1 of course, but its not surprise to me that the 350Z had its hands full, even with a nice Turbo.
It takes some good mods to get them movin. Great thing is, the 3.5 is more than ready to handle 8-12 Psi...
They are bad at putting down power though... When the LS1 raced the LT1 on good pressure, it was dead even. Since the 350Z didn't quite do that, I think thats the reason the guy turned down the pressure, thinkin he could take the 350Z with a little less bottle.
I gotta stick up for the LT1 of course, but its not surprise to me that the 350Z had its hands full, even with a nice Turbo.
no i knew the 350z was the fastest of all of us, it just i only had half a bottle and only had the heater on for 10 minutes, dont heat up that quick when it is 60 deg out.
#16
Originally Posted by camzaro28
for the record, no he dont. i will say one thing, 450+.
i am the LT1 in the vid. i had @800 bottle pressure when i ran the 350.
then when i ran the LS1 i had almost 1100, which is still low for my tune. u can hear it gargling and backfiring when i first hit, then it clears up.
i need to lower the fuel jet, will do that in the near future.
i am the LT1 in the vid. i had @800 bottle pressure when i ran the 350.
then when i ran the LS1 i had almost 1100, which is still low for my tune. u can hear it gargling and backfiring when i first hit, then it clears up.
i need to lower the fuel jet, will do that in the near future.
http://www.my350z.com/forum/showthre...25#post2165725
#19
Originally Posted by lukesnyder
Just for the record.. yah he does... He posted the dyno two months ago. 412RWHP to be exact.
http://www.my350z.com/forum/showthre...25#post2165725
http://www.my350z.com/forum/showthre...25#post2165725
not going to argue with u, but that was 2 months ago.
#20
Banned
iTrader: (3)
Join Date: Mar 2006
Location: Upstate NY
Posts: 1,292
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by lukesnyder
Just for the record.. yah he does... He posted the dyno two months ago. 412RWHP to be exact.
____
http://www.amazon.com/gp/music/clips...581158-0840102
Copy that into your Audio Player to see if you have a chance.