WS6 vs SC 350Z
#81
TECH Resident
iTrader: (1)
Join Date: Oct 2005
Location: LaGrange, KY
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So basically those motors must run like **** when you start modding them if you need to angle the exhaust tips downward to prevent carbon from building up in the bumper. I guess thats what happens when you try and get high horsepower out of a 4 cylinder, you end up running way too rich in the lower RPM's before you actually get it into the powerband. I've seen this on just about every 4 cylinder import on the road, civics to evos, the bumpers are black or burned near the exhaust tip.
My car has true duals, no cats, and bolts ons with a tune. Quad exhaust tips stick straight out the back, and I don't get any carbon on my bumper. I guess having an engine that runs properly makes all the difference.
My car has true duals, no cats, and bolts ons with a tune. Quad exhaust tips stick straight out the back, and I don't get any carbon on my bumper. I guess having an engine that runs properly makes all the difference.
#83
Staging Lane
iTrader: (14)
Join Date: Oct 2007
Location: Charlotte, NC
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
So basically those motors must run like **** when you start modding them if you need to angle the exhaust tips downward to prevent carbon from building up in the bumper. I guess thats what happens when you try and get high horsepower out of a 4 cylinder, you end up running way too rich in the lower RPM's before you actually get it into the powerband. I've seen this on just about every 4 cylinder import on the road, civics to evos, the bumpers are black or burned near the exhaust tip.
My car has true duals, no cats, and bolts ons with a tune. Quad exhaust tips stick straight out the back, and I don't get any carbon on my bumper. I guess having an engine that runs properly makes all the difference.
My car has true duals, no cats, and bolts ons with a tune. Quad exhaust tips stick straight out the back, and I don't get any carbon on my bumper. I guess having an engine that runs properly makes all the difference.
Yea, pretty much. The 00 and 01 S2000's are very rich from the factory. They start to lean them out a little starting with 02. You are right, though. Most V8's won't get gunk on the bumper without a cat...but most 4 cylinders will. You see that on turbo cars, especially, because they HAVE to be at least somewhat rich, or they'll lean out their car into high boost and blow the motor. Richer is safer but leaves gunk as well as robbing power.
#84
***Repost Police***
Join Date: Dec 2005
Location: DFW, TX
Posts: 2,480
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yea, pretty much. The 00 and 01 S2000's are very rich from the factory. They start to lean them out a little starting with 02. You are right, though. Most V8's won't get gunk on the bumper without a cat...but most 4 cylinders will. You see that on turbo cars, especially, because they HAVE to be at least somewhat rich, or they'll lean out their car into high boost and blow the motor. Richer is safer but leaves gunk as well as robbing power.
![Winky](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_wink.gif)
![Driving](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_driving3.gif)
#86
12 Second Club
iTrader: (6)
Join Date: Apr 2008
Location: The armpit of the United States.
Posts: 337
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
True! Especially w/ idiot's who just bolt **** on and think it's good to go. I run a Utec that is a piggy back to my ECU. The factory computer controls the car until boost starts, then the Utec takes over and leans or richen s the car and adjust timing.
#88
TECH Resident
iTrader: (1)
Join Date: Oct 2005
Location: LaGrange, KY
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
#89
***Repost Police***
Join Date: Dec 2005
Location: DFW, TX
Posts: 2,480
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
#92
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Heres an old run with a 400whp sc 350z.
This was from a roll on the way to the track
http://ca.youtube.com/watch?v=KtQFtIKf15g
Here is a crappy one once we were at the track, I gave him a pretty good head start on this one.
http://ca.youtube.com/watch?v=mM2OR7...watch_response
He is getting twin turbos now and coming back for some more. Hope I can still hold him off. He is saying between 500-550 whp. With the new set up.
This was from a roll on the way to the track
http://ca.youtube.com/watch?v=KtQFtIKf15g
Here is a crappy one once we were at the track, I gave him a pretty good head start on this one.
http://ca.youtube.com/watch?v=mM2OR7...watch_response
He is getting twin turbos now and coming back for some more. Hope I can still hold him off. He is saying between 500-550 whp. With the new set up.