2XR95Z28

iTrader: (4)

ok so i traded my extra ten bolt for these LCA's and some cash and i either lost this piece or it was never given too me and i didnt notice, either way its my fault and i just need to get it replaced...



As you can see on the one i'm missing the silver insert peice, anyone know where i can get a replacement?

Dude i got them from didnt know the brand but he thought they were wolfe? but i didnt see any single adjustable on their site so i have no clue on a brand.

Any help is appreciated!

Thanks!

UMI Sales

iTrader: (1)

Hello
If you know what Brand they are get in touch with that manufacture and they will be able to send you a sleeve.
Hope that helps
Brad

2XR95Z28

iTrader: (4)

Thats the thing i dont know what brand they are and the guy i got em from wasnt positive he just thought they were wolfe race craft?

I'm gonna get some better pics tonight or tomorrow and hopefully someone here can help me out identifying them.

2XR95Z28

iTrader: (4)

well here are some pics of the whole LCA's to try to identify them also i got some measurements of the sleeve..

Its 2.5 inches long, the outer diameter is 3/4 of an inch and the inner diameter is 1/2 inch. I'm talking about the hole on the LCA the sleeve slips into in 3/4 diameter and the hole on the sleeve the bolt would slip through is 1/2 inch... Also the over all diameter of the LCA is two inches..

I hope someone can help me out here lol

Here are the pics...




Any help is appreciated!!

2XR95Z28

iTrader: (4)

Bump... any help?

dragonrage

They do look like Wolfe Race Craft. They only seem to list double adjustables on their site now, but call/email them and they should be able to help you.

BMR Tech

iTrader: (9)

I would not think Wolf would make something of that quality he usually TIG welds everything.....

dragonrage

That's a good point. Maybe they were made as clones.

2XR95Z28

iTrader: (4)

ALright so let's say they are wolfe clones, with the dimensions i have where should i go about trying to get another sleeve?

Dan / Wolfe Race Craft

iTrader: (3)

I can tell you 100% they are not our control arms.

Looks like they were home made, and cheaply at that.

Mike454SS

iTrader: (4)

I would just walk into the most local machine shop you can find, with both arms, and ask them if they can duplicate the missing sleeve from one for the other...they'll probably only charge you a few bucks.