Can anyone tell me what brand LCA's these are?
06-02-2010, 11:54 PM
#1
Launching!
Thread Starter
iTrader: (9)
Join Date: Oct 2006
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Can anyone tell me what brand LCA's these are? I sold my camaro over 2 years ago and am just now getting around to selling the last of my old parts. I purchased these LCA's but cannot remember what brand they are? I believe they are chrome moly. Dont get confused by the center sections, I painted them back in the day with a bedliner paint. Any help is greatly appreciated.
06-03-2010, 03:47 AM
#2
Launching!
iTrader: (1)
Join Date: Aug 2009
Location: Seattle, WA
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Honestly all double adj LCAs look pretty much the same. Were I to have to guess based on the picture I'd say they were UMI
But the Spohn look pretty much the same just a little thinner at the ends:
But the Spohn look pretty much the same just a little thinner at the ends:
06-03-2010, 03:51 AM
#3
Launching!
iTrader: (1)
Join Date: Aug 2009
Location: Seattle, WA
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Oh fail. Now I see it's neither. There's no bulge on the metal part like on the Spohn or UMI pieces (and the BMR too). My guess would be that they are either off brand or home made.
06-03-2010, 07:43 AM
#4
Hello
They aren't ours! We use a left and a right hand tube adapter. Those have 2 right hand adapters....not too safe. Like mentioned above they look like they are home made. Sorry about that.
Brad
They aren't ours! We use a left and a right hand tube adapter. Those have 2 right hand adapters....not too safe. Like mentioned above they look like they are home made. Sorry about that.
Brad
06-03-2010, 08:51 AM
#5
Launching!
Thread Starter
iTrader: (9)
Join Date: Oct 2006
Posts: 208
Likes: 0
Received 0 Likes
on
0 Posts
Hmm well thanks anyway. They werent a big name company but then again they definately werent Billy Bob's beer fueled custom LCA's. I wouldnt have bought some homemade parts of someone. Just going to have to do a little more research.
06-03-2010, 11:24 AM
#6
Launching!
iTrader: (1)
Join Date: Aug 2009
Location: Seattle, WA
Posts: 232
Likes: 0
Received 0 Likes
on
0 Posts
Oh sorry I didn't see that. You sure you didn't trade a jug of moonshine to some backwoods metalworker for these? 
jk. Clearly they worked alright if you have had them for so long so I won't judge, but with the threads being wrong I can't see it being a major brand. Maybe someone misrepresented it when they sold it to you? Or the ends could have been replaced incorrectly at some point.
jk. Clearly they worked alright if you have had them for so long so I won't judge, but with the threads being wrong I can't see it being a major brand. Maybe someone misrepresented it when they sold it to you? Or the ends could have been replaced incorrectly at some point. 
