rear springs for drag racing.
#1
On The Tree
Thread Starter
iTrader: (15)
Join Date: Aug 2010
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
rear springs for drag racing.
Ok I recently put a 12 bolt in my camaro and now it sits higher in the rear. I already have done the hose mod and still Is high. Any suggestions on getting it setting at a good stance.
#4
Cutting the coils is a solution but one I really don't suggest. You could end up sitting on your bumpstops more often as you've changed your specs. I suppose one solution would be to change to lowered springs which has a higher progressive curve so you don't bottom out as easily even though its a shorter configuration.
You can change to coil overs where you can adjust the height to your liking easily Infinitely within a few inch range. This will allow you to change the spring rates easily too. PM or email me if you have more questions. I'm not on the boards as often as I like. When I have time, I try to help folks out in here.
You can change to coil overs where you can adjust the height to your liking easily Infinitely within a few inch range. This will allow you to change the spring rates easily too. PM or email me if you have more questions. I'm not on the boards as often as I like. When I have time, I try to help folks out in here.