Having UMI LCA relocation issue...
#22
FormerVendor
iTrader: (77)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
They're only suppose to move like that when you have Roto-joints or Rod-ends on both ends of the LCAs. ![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
With you have the fixed position poly bushings on the front of your LCAs then the Roto-joints at the rear should be straight, NOT angled. I'd check the jam nuts for the length adjustment I bet they're loose on both LCAs.
![Nod](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_nod.gif)
With you have the fixed position poly bushings on the front of your LCAs then the Roto-joints at the rear should be straight, NOT angled. I'd check the jam nuts for the length adjustment I bet they're loose on both LCAs.
I hope that helps,
Ryan