Ported heads, Fast 90/90 intake, 36lb injectors
01-27-2009 | 05:41 AM
#1
Thread Starter
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas
Ported heads, Fast 90/90 intake, 36lb injectors EVERYTHING IS SOLD
I going a different route on my build so I'm going to sell my heads, Fast 90mm intake and 36lb red top injectors.
[U]Heads $650.00:[U]
853 Ported and Polished Heads flow 300 @ 600 lift (the heads were done by Patriot), Valve Job was done less than 2,000 miles ago by Pavlock Performance, I will include the stock rockers and hardware.
Intake $650.00:
FAST 90MM with less than 100 miles on it. It was new in the box, I installed in on the car and drove it to the street meet and Spun an Rod bearing.
Throttle Body $200.00:
FAST 90MM throttle body, I sent it to FAST to get it fixed because it was sticking. They are going to repair it or just send me a new one, I will up-date when I know what they are going to do.
Injectors $175.00:
Ford motor sport 30lb flow matched injectors (equal to a 36lb injector)
I will take $1,500.00 for everything and buyer pay shipping/Pay-pal fees
My car made 398 to the wheels with a Yank 3800 Stall converter and I'm using a Texas Speed Torquer V.3 Camshaft - 231/234 .643"/.598" 111 LSA. These numbers was made with a stock LS1 short-block, FAST 78 intake and a ported and polished throttle body. It should make 400+ with the fast 90/90 set up.
I will get some more pictures when I get home this evening and up-date the information on the heads(valve size etc..)
If interested you can e-mail me at Chad.Windsor@cityofhouston.net or call me on my cell at 281-536-7467
I going a different route on my build so I'm going to sell my heads, Fast 90mm intake and 36lb red top injectors.
[U]Heads $650.00:[U]
853 Ported and Polished Heads flow 300 @ 600 lift (the heads were done by Patriot), Valve Job was done less than 2,000 miles ago by Pavlock Performance, I will include the stock rockers and hardware.
Intake $650.00:
FAST 90MM with less than 100 miles on it. It was new in the box, I installed in on the car and drove it to the street meet and Spun an Rod bearing.
Throttle Body $200.00:
FAST 90MM throttle body, I sent it to FAST to get it fixed because it was sticking. They are going to repair it or just send me a new one, I will up-date when I know what they are going to do.
Injectors $175.00:
Ford motor sport 30lb flow matched injectors (equal to a 36lb injector)
I will take $1,500.00 for everything and buyer pay shipping/Pay-pal fees
My car made 398 to the wheels with a Yank 3800 Stall converter and I'm using a Texas Speed Torquer V.3 Camshaft - 231/234 .643"/.598" 111 LSA. These numbers was made with a stock LS1 short-block, FAST 78 intake and a ported and polished throttle body. It should make 400+ with the fast 90/90 set up.
I will get some more pictures when I get home this evening and up-date the information on the heads(valve size etc..)
If interested you can e-mail me at Chad.Windsor@cityofhouston.net or call me on my cell at 281-536-7467
Last edited by Bad Chad; 01-29-2009 at 06:45 AM.
01-27-2009 | 11:27 AM
#2
The heads and cam in a stock ls1 short block with the 78mm fast intake and a ported throttle body ran some 11.30s in a full weight car with 3" true duals and 373 gears. The car and the set up used to be mine.
Trending Topics
01-29-2009 | 06:43 AM
#9
Thread Starter
Joined: Oct 2005
Posts: 300
Likes: 0
From: Huffman, Texas