1993 moostang coupe/roller
#1
1993 mustang coupe/roller $3250
blue clear title in hand
$3250 obo
214-475-4074
its a roller no motor or trans.
1993 coupe true 5.0 5spd car pedals are all still intact.
Team-Z k member with tubular control arms and adjustable coil overs 175lbs springs,qa1 adjustable shocks.
caster camber plates,manual rack.
double adj upper and lowers in the rear 50/50 shocks(Lakewood) drag launch springs rear. Anti roll bar (not installed) all Wolfe rear.
welded axles tubes,31 spline moser axles c-clip with moser full spool 4.30s 8.8 rear end
complete fuel system with a 5 gallon fuel cell,i do have the factory tank as well.
-8 feed line -10 return (fuel lines)
mallory 250 pump, mallory 500 fuel filter,and mallory return style reg.
big shot n2o kit and holley blue pump and dead head reg. Msd ignition(coil,6al box)
aluminum rad with e-fan.
e fan is on a switch.
swithes in place also for n2o,and electric water pump if needed.
autometer oil,temp,n2o gauges,tach.
interior is intact minus the rear seat. has a 6 point cage.
racing seat belts (out of date of coarse)
sub-frame connectors,not thru the floor style.
power glide hurst quarter stick,trans cross member inc.
all lights work.
power windows,power locks,mirrors.
tilt wheel, so that a big guy can kinda get out lol.
mustang has been sitting for a while now.
thanks
Ed
$3250 obo
214-475-4074
its a roller no motor or trans.
1993 coupe true 5.0 5spd car pedals are all still intact.
Team-Z k member with tubular control arms and adjustable coil overs 175lbs springs,qa1 adjustable shocks.
caster camber plates,manual rack.
double adj upper and lowers in the rear 50/50 shocks(Lakewood) drag launch springs rear. Anti roll bar (not installed) all Wolfe rear.
welded axles tubes,31 spline moser axles c-clip with moser full spool 4.30s 8.8 rear end
complete fuel system with a 5 gallon fuel cell,i do have the factory tank as well.
-8 feed line -10 return (fuel lines)
mallory 250 pump, mallory 500 fuel filter,and mallory return style reg.
big shot n2o kit and holley blue pump and dead head reg. Msd ignition(coil,6al box)
aluminum rad with e-fan.
e fan is on a switch.
swithes in place also for n2o,and electric water pump if needed.
autometer oil,temp,n2o gauges,tach.
interior is intact minus the rear seat. has a 6 point cage.
racing seat belts (out of date of coarse)
sub-frame connectors,not thru the floor style.
power glide hurst quarter stick,trans cross member inc.
all lights work.
power windows,power locks,mirrors.
tilt wheel, so that a big guy can kinda get out lol.
mustang has been sitting for a while now.
thanks
Ed
Last edited by mred; 05-07-2012 at 08:58 AM.
#3