WTS comp cam/givin away pewter hood
06-01-2009, 12:10 AM
#1
On The Tree
Thread Starter
iTrader: (2)
Join Date: Oct 2006
Location: Denton, Texas
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
WTS comp cam/givin away pewter hood i have a 02 pewter t/a hood (no scoops) with no hardware that i need to get rid of. its in good condition. ill let it go for free if you come pick it up.
also, i have a comp cam that is sitting in the garage. ill get the numbers on it later if anyone is interested. it has less than 2k miles on it. ill let it go for $75.
also, i have a comp cam that is sitting in the garage. ill get the numbers on it later if anyone is interested. it has less than 2k miles on it. ill let it go for $75.
06-01-2009, 12:26 AM
#2
Banned
iTrader: (13)
Join Date: Jan 2008
Location: Alvin,Tx
Posts: 179
Likes: 0
Received 0 Likes
on
0 Posts
i have a 02 pewter t/a hood (no scoops) with no hardware that i need to get rid of. its in good condition. ill let it go for free if you come pick it up.
also, i have a comp cam that is sitting in the garage. ill get the numbers on it later if anyone is interested. it has less than 2k miles on it. ill let it go for $75.
also, i have a comp cam that is sitting in the garage. ill get the numbers on it later if anyone is interested. it has less than 2k miles on it. ill let it go for $75.
06-01-2009, 09:55 AM
#4
On The Tree
Thread Starter
iTrader: (2)
Join Date: Oct 2006
Location: Denton, Texas
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
here are the specs as shown on the cam card.
part# 54-000-11 sn# J 5740-07
engine: LS1 chevy LS1/gen III 97-up roller
grind# LS1 3732R /3734R HR115+2
gross valve lift: I: .612 E: .615
duration @ .006 tappet lift I: 293 E: 297
these specs are for cam installed @ 113.0 intake center line
duration @ .050 I: 244 E: 248
lobe lift I: .3600 E: 3620
lobe seperation 115.0
part# 54-000-11 sn# J 5740-07
engine: LS1 chevy LS1/gen III 97-up roller
grind# LS1 3732R /3734R HR115+2
gross valve lift: I: .612 E: .615
duration @ .006 tappet lift I: 293 E: 297
these specs are for cam installed @ 113.0 intake center line
duration @ .050 I: 244 E: 248
lobe lift I: .3600 E: 3620
lobe seperation 115.0
Trending Topics
BUMP FOR GOOD DEALS! 
06-07-2009, 09:13 AM
#17
On The Tree
Thread Starter
iTrader: (2)
Join Date: Oct 2006
Location: Denton, Texas
Posts: 133
Likes: 0
Received 0 Likes
on
0 Posts
all i had was headers/intake/tune/exhaust. would definately get the springs and what not if you installed. i know at RPM to get all the upgraded components and to have it installed i was quoted around $1300 i think. has been a while so i may be wrong.