Prostars, DS loop, LCAs, Helm's manual
#1
Prostars, DS loop, LCAs, Helm's manual
For Sale
3.5 x 15 and 8 x 15 Weld Prostars w/ ET Streets, F-body bolt pattern: $450
Includes spacers and lug nuts for rears, and center caps for all. SOLD.
BMR drive shaft loop: $40
LGM lower control arms, need new heim joints: $50
Stock lower control arms:$15
Helm's service manual (GM) for 1999 F-body, full set: $50
http://casper9t9.webs.com/apps/photo...lbumid=8610850
PM for questions. Local (Houston) sale only.
3.5 x 15 and 8 x 15 Weld Prostars w/ ET Streets, F-body bolt pattern: $450
Includes spacers and lug nuts for rears, and center caps for all. SOLD.
BMR drive shaft loop: $40
LGM lower control arms, need new heim joints: $50
Stock lower control arms:$15
Helm's service manual (GM) for 1999 F-body, full set: $50
http://casper9t9.webs.com/apps/photo...lbumid=8610850
PM for questions. Local (Houston) sale only.
Last edited by Casper9T9; 04-02-2010 at 04:48 PM.
#3
For Sale
3.5 x 15 and 8 x 15 Weld Prostars w/ ET Streets, F-body bolt pattern: $450
Includes spacers and lug nuts for rears, and center caps for all.
BMR drive shaft loop: $40
LGM lower control arms, need new heim joints: $50
Stock lower control arms:$15
Helm's service manual (GM) for 1999 F-body, full set: $50
http://casper9t9.webs.com/apps/photo...lbumid=8610850
PM for questions. Local (Houston) sale only.
3.5 x 15 and 8 x 15 Weld Prostars w/ ET Streets, F-body bolt pattern: $450
Includes spacers and lug nuts for rears, and center caps for all.
BMR drive shaft loop: $40
LGM lower control arms, need new heim joints: $50
Stock lower control arms:$15
Helm's service manual (GM) for 1999 F-body, full set: $50
http://casper9t9.webs.com/apps/photo...lbumid=8610850
PM for questions. Local (Houston) sale only.
#6
i'll take the bmr ds safety loop and probably the lg motorsports lower control arms too, i just have a couple of question re the lca's. pm me a # where i can call you, i'm in seabrook.
Trending Topics
#8
Guys - I just left Houston for work out of state. I'll be back in three weeks and will resurrect the thread when I get back. Feel free to PM me questions in the mean time. Sorry you can't pick anything up. Should be back in town April 23/24...