*** FS/FT: 98 Single Turbo SS Camaro ***
06-14-2010, 12:41 AM
#1
10 Second Club
Thread Starter
Join Date: Oct 2003
Location: Lake Jackson TX
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
*** FS/FT: 98 Single Turbo SS Camaro *** CAR: 1998 Chevy Camaro SS
Mileage: 99,000 on chassis 8,500 on Motor
ZERO Miles on Turbo Set-up. I am putting the tranny in this week and will Dyno the car hopefully by the weekend. I will post numbers and more pics soon.
Engine
• Forged 347ci blue printed and assembled by LME of Houston Texas
• Stock polished crankshaft
• Manley H-beam rods
• Wiseco forged flat top pistons
• Childs and Albert dura moly rings
• Federal Mogal 152M mains
• Clevite cb663H rod bearings
• Dura bond cam bearings
• ARP main studs
• ARP head studs
• Cometic head gaskets
• Precision Race Components 6.0L stage 2.5 (9:1 compression ratio)
Manley Valves, 2.02"/1.57"
PRC Double Springs, Titanium Retainers, Seats, & Seals
Flow Data:
3.910" Flow Plate - No Exhaust Pipe
Lift Intake Flow Exhaust Flow
.200" 147 cfm 114 cfm
.300" 209 cfm 152 cfm
.400" 258 cfm 191 cfm
.500" 294 cfm 207 cfm
.600" 316 cfm 226 cfm
• EPP LS Forced Induction Camshaft @ .050 232-240 .595 int .608 exh 115.0
• Harden pushrods
• Double roller timing chain
• Meling high volume oil pump
• LS6 Intake
Turbo Kit
• Precision Turbo PTS-76MM
• PTK/EBay Hot side piping
• Tial f38 Wastegate
• Tial Bv 50mm
• Custom Built 4” Built by the same guy that did Mike Murillo’s
• All 3” Mandrel bent SS Tubing for the Cold Side
• Turbonetics Man Boost Controller
• V-Band Clamps
• Phanton Boost gauge
Transmission
• 4l70E Stock
• Circle D 3400 Stall
• SFI Flexplate/Flywheel
• B&M transmission cooler
Fuel System
• Lonnies Performance Double Pumper Kit & Complete Custom Fuel System
• Twin High Output Walbro Fuel Pump Kit, Wiring Harness & Hobbs Switch
• -8 Supply & -6 Return lines, filter, & Jegs fittings
• Custom billet fuel rails
• Aeromotive regulator
• Mototron 60lb Injectors
• Phantom Fuel gauge
Suspension Wheels and Tires
• Bilstein Shocks and struts
• BMR Trak PakŠ Short Torque Arm
• BMR Standard adjustable Panhard rod w/poly ends
• BMR Adjustable "Street" control arms
• Fikse Mag Wheels
• 18x11.0 Rears
• 18x 9.5 Fronts
• BFG 315-35-18 rear Drag Radials
.
I am looking to see if I can get a reasonable offer on my car. I am also open to trades on this one. I am looking for something of equal or lesser value. Vehicles that I am interested in are and must be 4x4’s:
4x4 Jeep
4x4 Tahoe
4x4 Suburban
I am not looking for another Fbody or Muscle car.
I do not need to sale this car. I just would like to see the car go to someone that can have more time for this car than I do. The Car has been garage kept and is in great shape for a 98.
I am Asking $16,000 O.B.O
Mileage: 99,000 on chassis 8,500 on Motor
ZERO Miles on Turbo Set-up. I am putting the tranny in this week and will Dyno the car hopefully by the weekend. I will post numbers and more pics soon.
Engine
• Forged 347ci blue printed and assembled by LME of Houston Texas
• Stock polished crankshaft
• Manley H-beam rods
• Wiseco forged flat top pistons
• Childs and Albert dura moly rings
• Federal Mogal 152M mains
• Clevite cb663H rod bearings
• Dura bond cam bearings
• ARP main studs
• ARP head studs
• Cometic head gaskets
• Precision Race Components 6.0L stage 2.5 (9:1 compression ratio)
Manley Valves, 2.02"/1.57"
PRC Double Springs, Titanium Retainers, Seats, & Seals
Flow Data:
3.910" Flow Plate - No Exhaust Pipe
Lift Intake Flow Exhaust Flow
.200" 147 cfm 114 cfm
.300" 209 cfm 152 cfm
.400" 258 cfm 191 cfm
.500" 294 cfm 207 cfm
.600" 316 cfm 226 cfm
• EPP LS Forced Induction Camshaft @ .050 232-240 .595 int .608 exh 115.0
• Harden pushrods
• Double roller timing chain
• Meling high volume oil pump
• LS6 Intake
Turbo Kit
• Precision Turbo PTS-76MM
• PTK/EBay Hot side piping
• Tial f38 Wastegate
• Tial Bv 50mm
• Custom Built 4” Built by the same guy that did Mike Murillo’s
• All 3” Mandrel bent SS Tubing for the Cold Side
• Turbonetics Man Boost Controller
• V-Band Clamps
• Phanton Boost gauge
Transmission
• 4l70E Stock
• Circle D 3400 Stall
• SFI Flexplate/Flywheel
• B&M transmission cooler
Fuel System
• Lonnies Performance Double Pumper Kit & Complete Custom Fuel System
• Twin High Output Walbro Fuel Pump Kit, Wiring Harness & Hobbs Switch
• -8 Supply & -6 Return lines, filter, & Jegs fittings
• Custom billet fuel rails
• Aeromotive regulator
• Mototron 60lb Injectors
• Phantom Fuel gauge
Suspension Wheels and Tires
• Bilstein Shocks and struts
• BMR Trak PakŠ Short Torque Arm
• BMR Standard adjustable Panhard rod w/poly ends
• BMR Adjustable "Street" control arms
• Fikse Mag Wheels
• 18x11.0 Rears
• 18x 9.5 Fronts
• BFG 315-35-18 rear Drag Radials
.
I am looking to see if I can get a reasonable offer on my car. I am also open to trades on this one. I am looking for something of equal or lesser value. Vehicles that I am interested in are and must be 4x4’s:
4x4 Jeep
4x4 Tahoe
4x4 Suburban
I am not looking for another Fbody or Muscle car.
I do not need to sale this car. I just would like to see the car go to someone that can have more time for this car than I do. The Car has been garage kept and is in great shape for a 98.
I am Asking $16,000 O.B.O
Last edited by badboy4life; 06-16-2010 at 06:42 PM.
Trending Topics
06-16-2010, 08:45 AM
#11
10 Second Club
Thread Starter
Join Date: Oct 2003
Location: Lake Jackson TX
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
It should be as soon as the tranny goes in. Should make decent power. Reason I'm selling is I have lost interest and I don't have enough time to spend on the car. Why dont you go ahead and buy it from me or trade me that nice *** truck of yours.
06-16-2010, 08:52 AM
#12
10 Second Club
Thread Starter
Join Date: Oct 2003
Location: Lake Jackson TX
Posts: 557
Likes: 0
Received 0 Likes
on
0 Posts
06-16-2010, 09:00 AM
#13
CAR: 1998 Chevy Camaro SS
Mileage: 99,000 on chassis 8,500 on Motor
ZERO Miles on Turbo Set-up. I am putting the tranny in this week and will Dyno the car hopefully by the weekend. I will post numbers and more pics soon.
Engine
Forged 347ci blue printed and assembled by LME of Houston Texas
Stock polished crankshaft
Manley H-beam rods
Wiseco forged flat top pistons
Childs and Albert dura moly rings
Federal Mogal 152M mains
Clevite cb663H rod bearings
Dura bond cam bearings
ARP main studs
ARP head studs
Cometic head gaskets
Precision Race Components 6.0L stage 2.5 (9:1 compression ratio)
Manley Valves, 2.02"/1.57"
PRC Double Springs, Titanium Retainers, Seats, & Seals
Flow Data:
3.910" Flow Plate - No Exhaust Pipe
Lift Intake Flow Exhaust Flow
.200" 147 cfm 114 cfm
.300" 209 cfm 152 cfm
.400" 258 cfm 191 cfm
.500" 294 cfm 207 cfm
.600" 316 cfm 226 cfm
EPP LS Forced Induction Camshaft @ .050 232-240 .595 int .608 exh 115.0
Harden pushrods
Double roller timing chain
Meling high volume oil pump
LS6 Intake
Turbo Kit
Precision Turbo PTS-76MM
PTK/EBay Hot side piping
Tial f38 Wastegate
Tial Bv 50mm
Custom Built 4 Built by the same guy that did Mike Murillos
All 3 Mandrel bent SS Tubing for the Cold Side
Turbonetics Man Boost Controller
V-Band Clamps
Phanton Boost gauge
Transmission
4l70E Stock
Circle D 3400 Stall
SFI Flexplate/Flywheel
B&M transmission cooler
Fuel System
Lonnies Performance Double Pumper Kit & Complete Custom Fuel System
Twin High Output Walbro Fuel Pump Kit, Wiring Harness & Hobbs Switch
-8 Supply & -6 Return lines, filter, & Jegs fittings
Custom billet fuel rails
Aeromotive regulator
Mototron 60lb Injectors
Phantom Fuel gauge
Suspension Wheels and Tires
Bilstein Shocks and struts
BMR Trak PakŠ Short Torque Arm
BMR Standard adjustable Panhard rod w/poly ends
BMR Adjustable "Street" control arms
Fikse Mag Wheels
18x11.0 Rears
18x 9.5 Fronts
BFG 315-35-18 rear Drag Radials
.
I am looking to see if I can get a reasonable offer on my car. I am also open to trades on this one. I am looking for something of equal or lesser value. Vehicles that I am interested in are and must be 4x4s:
4x4 Jeep
4x4 Tahoe
4x4 Suburban
I am not looking for another Fbody or Muscle car.
I do not need to sale this car. I just would like to see the car go to someone that can have more time for this car than I do. The Car has been garage kept and is in great shape for a 98.
I am Asking $16,000 O.B.O
Mileage: 99,000 on chassis 8,500 on Motor
ZERO Miles on Turbo Set-up. I am putting the tranny in this week and will Dyno the car hopefully by the weekend. I will post numbers and more pics soon.
Engine
Forged 347ci blue printed and assembled by LME of Houston Texas
Stock polished crankshaft
Manley H-beam rods
Wiseco forged flat top pistons
Childs and Albert dura moly rings
Federal Mogal 152M mains
Clevite cb663H rod bearings
Dura bond cam bearings
ARP main studs
ARP head studs
Cometic head gaskets
Precision Race Components 6.0L stage 2.5 (9:1 compression ratio)
Manley Valves, 2.02"/1.57"
PRC Double Springs, Titanium Retainers, Seats, & Seals
Flow Data:
3.910" Flow Plate - No Exhaust Pipe
Lift Intake Flow Exhaust Flow
.200" 147 cfm 114 cfm
.300" 209 cfm 152 cfm
.400" 258 cfm 191 cfm
.500" 294 cfm 207 cfm
.600" 316 cfm 226 cfm
EPP LS Forced Induction Camshaft @ .050 232-240 .595 int .608 exh 115.0
Harden pushrods
Double roller timing chain
Meling high volume oil pump
LS6 Intake
Turbo Kit
Precision Turbo PTS-76MM
PTK/EBay Hot side piping
Tial f38 Wastegate
Tial Bv 50mm
Custom Built 4 Built by the same guy that did Mike Murillos
All 3 Mandrel bent SS Tubing for the Cold Side
Turbonetics Man Boost Controller
V-Band Clamps
Phanton Boost gauge
Transmission
4l70E Stock
Circle D 3400 Stall
SFI Flexplate/Flywheel
B&M transmission cooler
Fuel System
Lonnies Performance Double Pumper Kit & Complete Custom Fuel System
Twin High Output Walbro Fuel Pump Kit, Wiring Harness & Hobbs Switch
-8 Supply & -6 Return lines, filter, & Jegs fittings
Custom billet fuel rails
Aeromotive regulator
Mototron 60lb Injectors
Phantom Fuel gauge
Suspension Wheels and Tires
Bilstein Shocks and struts
BMR Trak PakŠ Short Torque Arm
BMR Standard adjustable Panhard rod w/poly ends
BMR Adjustable "Street" control arms
Fikse Mag Wheels
18x11.0 Rears
18x 9.5 Fronts
BFG 315-35-18 rear Drag Radials
.
I am looking to see if I can get a reasonable offer on my car. I am also open to trades on this one. I am looking for something of equal or lesser value. Vehicles that I am interested in are and must be 4x4s:
4x4 Jeep
4x4 Tahoe
4x4 Suburban
I am not looking for another Fbody or Muscle car.
I do not need to sale this car. I just would like to see the car go to someone that can have more time for this car than I do. The Car has been garage kept and is in great shape for a 98.
I am Asking $16,000 O.B.O
im so going to go facebook on you and "LIKE" this 
