BTL FED

iTrader: (9)

I just dont have time to keep up with this project anymore, as you read down the list I think you will notice only the best of the best was used, I can almost promise you, that you have never ridden in an F-body that handles like this, but drives just as well as a stock T/A that would have no problem being a daily driver:

2002 Trans-Am WS-6 Corner Carver
Color: Black
Transmission: M6
Gears: 3:42
Mileage:86k

Parts that have been on the car for more than 5k miles:

*BMR Square Weld-in Subframe Connectors
*18x9 and 18x10.5 Black Z06 Rims with Silver Lips and Rivets
*Pro 5.0 Shifter with Lou's Short Stick on it
*Silver TSP lid with a Dry Nozzle Installed
*Shaner fully ported and Polished stock Throttle Body
*Textrilla Clutch
*Baer EradiSpeed 2 piece front Brakes
*Baer Eradispeed 1 Piece Rear Brakes
*Optima Red Top Battery
*Msd Digital Window Switch (Not Installed)
*Dynotune Dry Nitrous Kit w/ Bottle Warmer (Not Installed)

Parts that have been on car for less than 1k miles:

Engine/Exhaust:
*Turn One power steering Pump w/ Billet Pulley 300.00 http://www.turnone-steering.com/ls1.html
*Dual Catch Can Setup 135.00 http://www.saikoumichi.com/Stage1_LS1_page.html
*Ls6 PCV Setup 169.99 http://www.thunderracing.com/shop-by...em/PCV-System/
*ARH 1 7/8 Headers with catted Y-Pipe 1390.80 http://www.lmperformance.com/15431/1.html
*Slp Powerflow exhaust with Dual/Dual Tips 604.45 http://www.lmperformance.com/24192/1.html
*2X DMH Low Profile electric Cutouts 399.95 http://marylandspeed.com/dmh-low-pro...ut-p-1313.html
*ATI Serpentine Series Damper Assembly with Hub, 6-3/4" (10% Underdrive) 498.99 http://www.thunderracing.com/shop-by...ies/Balancers/
*Improved Racing F-Body Trap-Door Race Baffle 199.00 http://www.improvedracing.com/produc...42244c73ffbfb2
*Katech Connecting Rod Bolts 199.99 http://store.katechengines.com/conne...bolts-p25.aspx
*QTP High Volumne Oil Pump 180.00 http://www.quicktimeperformance.com/Cover/
*QTP Billet Ls2 2-piece front Cover 460.00 http://www.quicktimeperformance.com/Cover/
*Ls2 Timing Change 41.99 http://texas-speed.com/shop/item.asp?itemid=620
*Comp Cams Billet Belt Tensioner 176.80 http://www.lmperformance.com/18466/1.html
*Edelbrock Victor Series Water Pump 311.95 http://www.byunspeed.com/product_inf...60cd30a3f696c8
*Billet Pulley for Edelbrock Water Pump 86.75 http://www.byunspeed.com/product_inf...60cd30a3f696c8
*Custom Power Steering Cooler
*Amsoil 5-30 oil
*160 degree thermp with Ls2 Housing 52.99 http://www.byunspeed.com/product_inf...ducts_id=12769

Suspension/Tires:
*Nitto 275/35/18 213.00 per tire http://www.discounttiredirect.com/di...mance&tmn=NT05
*Nitto 295/35/18 227.00 per tire http://www.discounttiredirect.com/di...mance&tmn=NT05
*Koni 4/4 Struts 322.00 per strut http://www.stranoparts.com/partdetai...D=20&ModelID=7
*Koni 4/4 Shocks 177.00 per shock http://www.stranoparts.com/partdetai...D=20&ModelID=7
*Strano Springs 275.00 http://www.stranoparts.com/partdetai...=113&ModelID=7
*Strano Hollow Sway Bar Set 389.98 http://www.stranoparts.com/partdetai...=126&ModelID=7
*Fays 2 Watts Link rear setup 650.00 http://www.stranoparts.com/partdetai...D=67&ModelID=7
*Moog Greasable Tie Rod Ends
*UMI Road Race K-Member 569.99 http://www.umiperformance.com/catalo...roducts_id=176
*UMI Complete Adjustable Front A-Arm Kit Upper and Lower 637.99 http://www.umiperformance.com/catalo...roducts_id=143
*Spohn Adjustable Tubular Shock Tower Brace 113.05 http://www.byunspeed.com/product_inf...oducts_id=1057
*Spohn Precision Front Upper Ball Joints 99.90 http://www.byunspeed.com/product_inf...ducts_id=11824
*Spohn Pro-Series Adjustable Torque Arm - Long Tube Headers & Y-Pipe 527.25 http://www.byunspeed.com/index.php
*UMI F-Body Double Adjustable Control Arms- Roto-Joints 239.99 http://www.umiperformance.com/catalo...roducts_id=353

Misc Upgrades:
*Custom Sequential Taillights
*Blackbird Strips on the Hood
*Rear 6LE Rear Seat Deletes with Storage 195.00 http://6litereaterdesigns.com/store/...products_id=43
*Poly Motor and Transmission Mounts
*Both Headlight Gears have been replaced with Brass Gears
*New Driver and Passanger window Motors
*HP Tuners VCM Suite (So you can do all your own tuning)
*HPS Front Brake Pads
*Rear HPS Pads, not installed yet
*LPW Ultimate Rear End Cover (No Gear WHine)
*ARP wheel studs installed in the front, have them but havent installed in the rear yet
*New Window Tint
*Motor/Tranny/Rear all filled with amsoil Fluids
*Collectors Edition WS6 Badge
*Last of the bread badges (x2) not installed yet
*C6 Shift ****

I should have pics up in the next day or so, asking 12.5k OBO, I have the ability to pull the car up on a lift so you could see all the suspension work if you wanted.

Please call me with any questions
Kyle
972-877-5780

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]

[IMG][/IMG]


[IMG][/IMG]

Little Control Panel, that works the cutouts among other things:


Corvette C6 Shift ****:


Under Hood
[IMG][/IMG]

Pulley
[IMG][/IMG]

Suspension and Exhaust
[IMG][/IMG]

Front Tires are same tread pattern, Almost New


[IMG][/IMG]

retardedpenguin

iTrader: (2)

If you don't mind, where did you get the blackbird stripes?

Sounds like a good car, I would buy it(want a different color) but it would be a hassle to sell mine.

bwooten492

Sounds like a nice car. Waiting to see pics...

BTL FED

iTrader: (9)

I will have some pics up this afternoon

red90cobra

iTrader: (36)

Very nice Kyle. I didn't even know u got another car. Sounds like a super nice car.

jbridwelltransam

iTrader: (12)

definately wanna see some pics

1FAST02FORMULAHAWK

iTrader: (8)

in for pics, and bump for a well done FS add.

BTL FED

iTrader: (9)

I am gonna try and get some better pics (with the car actually clean), some underhood shots, and some suspension shots

1FAST02FORMULAHAWK

iTrader: (8)

Interested, in for mo'betta pics

BTL FED

iTrader: (9)

Great, I will get some up as quick as I can, might take a day or so, Grandfather is in the hospital not doing so good.

I will get some pics with it up on my lift also so you are able to see all the suspension work

TetsuKatana

PM sent.

ruf455

Interested...as long as it has all the lug nuts on it

ruf455@msn.com

drop me a line...

BTL FED

iTrader: (9)

Good eye, I didnt put the lock nuts back on

BTL FED

iTrader: (9)

TTT for the new pictures

red90cobra

iTrader: (36)

Beautiful car Kyle. Wish I had the cash. Best of luck with it.

01PewterMadre

iTrader: (4)

New proud owner!!! thanks again Kyle

03Sssnake

iTrader: (20)

you lucky bastige...nice grab dude!

KWIKKAR

iTrader: (15)

How do you like that Watts link setup??

Never seen that before??