I have a set of Greg weld Racestars mounted/balanced on a set of Moroso ds2 fronts and MT Drag 28x10.5x15S. These wheels and tires were on my car for 1 race (San Antonio Big Money Bash). I mounted these tires at the track, made 6 passes, and took them off. They are basically brand new. They were professionally mounted/balanced at a buddies Ford Dealership to make sure no scratches/etc would happen.

Will sell complete, or just tires. They will come with lugs (open long lugs that fit stock studs) and center caps as I never mounted the center caps.

1200$ for the set
Frts 200$ (Paid 270$)
Rear 325$ (Paid 425$)

Trades: triple pillar pod, AEM tru boost gauge, 3.5inch electric cutout, Air/Fuel Gauge

 

Have any pictures with them on the car??

 

What did you have to do to clear the 28" tire?

 

I only have a couple of pics of the car from the weekend. I will post them up in a second. Only thing I did to clearance the 28s was roll the lips (not needed if it is stock height) and move the rear bumper corner back a little. The tires arent even close to touching the fender lips, no rubbing on the inside wheel well. Only thing that rubbed was the bottom corner of the bumper. I can explain what I did in more detail in needed, but I refused to cut the rear bumper.

 

Only pic I can find right now. They were only on the car for this one race. You can check the San Antonio Big Money bash to confirm. Would like to keep them, but I won't be using them for a while until the car is finished.

 

Sell just the wheels? Will u ship? If so, send me a pm please sir!

Vinny

 

Nope...Package or just tires sir. Won't ship them due to how expensive it would be. You can get the wheels for 669.00 shipped online at mckormick racing (something like that). Thanks for the interest though

 

I have family coming to San Antonio from Shreveport this week. Will be headed back to Shreveport La on Sunday. They can deliver/meet if there is some interest for some of you folks who aren't near San Antonio

 

What size are the wheels? You gave the tire specs but whats the wheel specs?

 

Racestar Industries 15x10" w/ 7.5" BS, 15x3.75 w/ 1.5" BS

 

I really want this setup but I fear it would mean the death of my 10 bolt haha

 

10 bolts can live for a little while if you slip the clutch off the line. Got a couple of buddies that are making their 10 bolts live and they are cutting in the high 1.8 60fts. They are on borrowed time though

 

Returned all PMs!

 

Bump for u Andrew. Someone need to buy these

 

Thanks sir!

 

Did you have to cut out the bump stops and/or do some BFHing of the inner fender wells to get a 10.5 tire to fit?

 

I'm guessing the fronts have 1.5" bs? I dont see 1.75 listed...

 

bumpstops werent touched. I did do a little bit of BFH, but prolly not as much as everyone else.

 

whatever the F-body specific back spacing is. Ill check the box again.

 

-28.7mm/1.5" backspace. Thanks!