Fs: Nbm Ws6. Need Gone!
#1
Thread Starter
Teching In
iTrader: (2)
Joined: Oct 2007
Posts: 15
Likes: 0
From: Houston TX/ River Falls WI
Fs: Nbm Ws6. Need Gone!
Its a 1998 nbm ws6. PRICE REDUCED!!!!! >>>>>$$$8500<<<<<
-graphite interior color
-02 ws6 wheels (so they are not the 16'' 98's)
-FAST 90 intake
-NW 90 TB
-patriot heads, 2.020in. 1.57exh., 67cc c. ch.
-comp cam, 240/240 @.050, 113lsa
-CAI
-patriot long tubes
-corsa 3'' stainless exhaust
-no cats
-hurst shifter
-new spec 3 clutch
-ford 36lb injectors
-mahle flat top pistons
-new ARP studs and bolts in bottom end. (stock crank and rods)
-walbro 255 fuelpump
-10.5:1 cr
The odometer says 180k...but thats just the body. the paint is in good shape, few little dings(typical houston bullshit).
Engine had about 10k on it
new clutch with about 300 miles on it
new rear end, still a 10 bolt but all new bearings, bearing races, motive 3:73 gears, TA performace diff cover with preload studs, and auborne posi unit. all this has about 4k on it.
brakes have about 100 on e\them
T-top's dont leak, interior is in great shape, one little tear in driverside seat from getting in and out. there are no problems mechanicly wiht the car, i just need the money really bad for school right now!! lookin for $10,000 obo.
car dyno'd at 402 rwhp at 6700 rpm and 374 trq.
i have dyno graphs, i just need to get them onto my computer if anyone wants them. Im thinkin if i cant get this sold im gonna sell the mods off it and replace with stock **** and bring it to the dealer...
i will get some better pics up this weekend if its nice! PM me with any reasonable offers, i need this car gone asap! LMK what yall think.
http://www.youtube.com/watch?v=WvbckqJp0Dk
http://www.youtube.com/watch?v=672Jzu305sI
-graphite interior color
-02 ws6 wheels (so they are not the 16'' 98's)
-FAST 90 intake
-NW 90 TB
-patriot heads, 2.020in. 1.57exh., 67cc c. ch.
-comp cam, 240/240 @.050, 113lsa
-CAI
-patriot long tubes
-corsa 3'' stainless exhaust
-no cats
-hurst shifter
-new spec 3 clutch
-ford 36lb injectors
-mahle flat top pistons
-new ARP studs and bolts in bottom end. (stock crank and rods)
-walbro 255 fuelpump
-10.5:1 cr
The odometer says 180k...but thats just the body. the paint is in good shape, few little dings(typical houston bullshit).
Engine had about 10k on it
new clutch with about 300 miles on it
new rear end, still a 10 bolt but all new bearings, bearing races, motive 3:73 gears, TA performace diff cover with preload studs, and auborne posi unit. all this has about 4k on it.
brakes have about 100 on e\them
T-top's dont leak, interior is in great shape, one little tear in driverside seat from getting in and out. there are no problems mechanicly wiht the car, i just need the money really bad for school right now!! lookin for $10,000 obo.
car dyno'd at 402 rwhp at 6700 rpm and 374 trq.
i have dyno graphs, i just need to get them onto my computer if anyone wants them. Im thinkin if i cant get this sold im gonna sell the mods off it and replace with stock **** and bring it to the dealer...
i will get some better pics up this weekend if its nice! PM me with any reasonable offers, i need this car gone asap! LMK what yall think.
http://www.youtube.com/watch?v=WvbckqJp0Dk
http://www.youtube.com/watch?v=672Jzu305sI
Last edited by 383jake; 10-20-2008 at 08:39 PM.
#3
Hey beautiful car, and just a tip - Get it detailed (do it yourself) under the hood and the entire car. That will go a long way to helping you sell it. That engine bay needs a bath.
Good luck with the sale, she's perty!!!
Good luck with the sale, she's perty!!!
#4
appearance is everything even if you gotta get rid of it, 80% of cars sell because of appearance (not to us obliviously) but it helps alot
#5
Thread Starter
Teching In
iTrader: (2)
Joined: Oct 2007
Posts: 15
Likes: 0
From: Houston TX/ River Falls WI
thank guys! yeah those 2 pics are actually the pics from when it sat for a month while the rear end was out... its all cleaned up now. i just gotta get the pics off my girlfriends camera and up here.