Blue Z06 I ran on the tollway tonight? You here?
#81
TECH Fanatic
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LS6 heads? Fast intake mani? No way on stock LS1 heads, stock LS1 intake, and a stalled auto you'll put down that much with just a cam... I guess it depends on the dyno too though. Some dynos read pretty high.
edit: I don't know much about that cam though, I hear they do peak very high. Tq suffers compared to some others, but for top end they do nice.
edit: I don't know much about that cam though, I hear they do peak very high. Tq suffers compared to some others, but for top end they do nice.
![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
#82
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
my car put down 414rwhp 389rwtq with Stock heads,intake,tb,block,thru a stock tranny and stock rear full weight(stock wheels,spare and jack) also! now it is a 2002 WS6 with RPM5 cam,FLP long tube headers,hutto true duals,TSP lid(if that even counts) and the main thing its Sam tuned but other then that its factory stock!!! it also ran 11.78@116 last year in july in the Texas heat! and from what i was told that dyno reads lower then most so............. you draw your on conclusions![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
![Mr. Cool](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_cool.gif)
edit: I googles "450whp cam only ls1" and got a hit about a corvette that did it...That's insane if it's true.
Last edited by squale iii; 06-09-2010 at 10:56 PM.
#85
#86
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2009
Location: Mesquite TX
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
It's a 2002 WS6, it COMES WITH AN LS6 INTAKE LOL. So yes, with an LS6 intake, bolt-ons, and a nice cam, 414 is very normal LOL. You ran 11.78@ 116, that's normal for those mods too. I ran 12.0@116 in a full weight m6 CONVERTIBLE. As you can see our trap speeds were the same, so yes, you're right on par. 414rwhp does not equal 450rwhp lol.
edit: I googles "450whp cam only ls1" and got a hit about a corvette that did it...That's insane if it's true.
edit: I googles "450whp cam only ls1" and got a hit about a corvette that did it...That's insane if it's true.
#88
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just read up on thunder racing's website...jesus that cam makes serious power! LOL. I want one.
How the **** does a cam only car make 450+??? Do you have to notch pistons? That's insane. like...If I made 414 cam only, and 454 with heads...if i swapped to that cam would I make like 475+???
How the **** does a cam only car make 450+??? Do you have to notch pistons? That's insane. like...If I made 414 cam only, and 454 with heads...if i swapped to that cam would I make like 475+???
#89
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2009
Location: Mesquite TX
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
dum dum The dyno above is of a 99 TransAm withdumstock unported cylinder heads, Thunder Racing's T-ReX v.2 camshaft, and a full package of bolt-on parts, including long tube headers, pulley, LS6 intake manifold, Whisper lid, ported throttle body.dum Dyno runs were on 93 octane gasoline and a factory steel flyweel.
#91
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2009
Location: Mesquite TX
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
dum dum The dyno above is of a 99 TransAm withdumstock unported cylinder heads, Thunder Racing's T-ReX v.2 camshaft, and a full package of bolt-on parts, including long tube headers, pulley, LS6 intake manifold, Whisper lid, ported throttle body.dum Dyno runs were on 93 octane gasoline and a factory steel flyweel.
#94
TECH Fanatic
iTrader: (1)
Join Date: Aug 2002
Location: Dallas, TX
Posts: 1,733
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech20year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
autos should stick to digs.
I should stick to rolls. ![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
That Trex is a mammoth for a little 346. OP Not sure if a 7.8 is an 11 with a T/A auto.. 7.9 for my c6 was right on the edge.
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
![Sad](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_sad.gif)
That Trex is a mammoth for a little 346. OP Not sure if a 7.8 is an 11 with a T/A auto.. 7.9 for my c6 was right on the edge.
Last edited by InsomZ; 06-09-2010 at 11:47 PM.
#96
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I just read up on thunder racing's website...jesus that cam makes serious power! LOL. I want one.
How the **** does a cam only car make 450+??? Do you have to notch pistons? That's insane. like...If I made 414 cam only, and 454 with heads...if i swapped to that cam would I make like 475+???
How the **** does a cam only car make 450+??? Do you have to notch pistons? That's insane. like...If I made 414 cam only, and 454 with heads...if i swapped to that cam would I make like 475+???
#97
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
don't you have LS6 heads stock?
#98
TECH Fanatic
iTrader: (2)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
LS6 heads? Fast intake mani? No way on stock LS1 heads, stock LS1 intake, and a stalled auto you'll put down that much with just a cam...
maybe i should have just quoted this part? sure the 01-02' have the LS6 intake but neither have the LS6 heads or fast intake to make over 400rwhp does that help clarify and doesn't a ported fast intake make like 16-17 more rwhp then a LS6 intake on average?
maybe i should have just quoted this part? sure the 01-02' have the LS6 intake but neither have the LS6 heads or fast intake to make over 400rwhp does that help clarify and doesn't a ported fast intake make like 16-17 more rwhp then a LS6 intake on average?
![Rolleyes](https://ls1tech.com/forums/images/smilies/LS1Tech/rolleyes.gif)
Last edited by Omega Doom; 06-10-2010 at 04:57 AM.
#99
Teching In
Join Date: Jun 2010
Location: Mansfield, TX
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Yeah prods car is quick (its only 4cyl
)
Good runs tho ... i made a friendly bet with prod vs redws6 and i won![Engarde](https://ls1tech.com/forums/images/smilies3/engarde.gif)
btw, i just joined i know some of the local guys here in the DFW area
![Grin](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_grin.gif)
Good runs tho ... i made a friendly bet with prod vs redws6 and i won
![Engarde](https://ls1tech.com/forums/images/smilies3/engarde.gif)
btw, i just joined i know some of the local guys here in the DFW area
#100
On The Tree
Thread Starter
iTrader: (2)
Join Date: Aug 2009
Location: Mesquite TX
Posts: 177
Likes: 0
Received 0 Likes
on
0 Posts
![](https://ls1tech.com/forums/images/ranks/ls1tech10year.png)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
7.8 might be a 12.0 but I ran it with the rev limiter hitting twice on the 1-2 shift, with that fixed I could pick up .2 in the 1/8th. So with that right I'd figure 7.6@91 maybe with a high 11 in the 1/4. In better weather I could be mid 11s I believe?