was a sad day sold the ws6
#1
On The Tree
Thread Starter
iTrader: (6)
Join Date: Apr 2010
Location: la porte TX
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
was a sad day sold the ws6
So due to financial changes I had to sell my baby. I thought I was going to cry. Lol so with the little bit of profit I made I had to look for something cash. If it had sold in the 2 weekends before there were some nice choices but things never go right and I ended up with a foxbody Stang (turd!!!). I'm a little stuck though not sure if I want to sell it for a profit if possible or since the body and interior are good I am looking to do a swap. What better swap than a ls1.
Please spare the snide remarks about how I am a traitor or crossbreeding. Opinions other than that are welcome
Please spare the snide remarks about how I am a traitor or crossbreeding. Opinions other than that are welcome
#6
In-Zane Moderator
iTrader: (25)
This guy has gone 9s with a carbed 6.0 swap, stock long block parts, cam only.
I am all about LS in fox car, ******* were only quick because they are light, not because they make power.
https://ls1tech.com/forums/conversio...ard-6-0-a.html
I am all about LS in fox car, ******* were only quick because they are light, not because they make power.
https://ls1tech.com/forums/conversio...ard-6-0-a.html
Trending Topics
#9
TECH Apprentice
iTrader: (94)
Join Date: Oct 2005
Location: Huffman, Texas
Posts: 300
Likes: 0
Received 0 Likes
on
0 Posts
Here is about what it will cost you to do a LS1 swap in a Mustang. There is cheaper ways to do this but I did not feel like fabing parts so I just bought what I needed to get it done
AJE K-Member $360.00
Transmission crossmember $160.00 (Or build one for about $20.00-$30.00)
Kooks 1 7/8 headers $650.00
Aftermarket wiring harness $450.00
Motor and transmission $2,000.00
Fuel system around $300.00
Drive shaft built will be around $200.00 or $300.00
AJE K-Member $360.00
Transmission crossmember $160.00 (Or build one for about $20.00-$30.00)
Kooks 1 7/8 headers $650.00
Aftermarket wiring harness $450.00
Motor and transmission $2,000.00
Fuel system around $300.00
Drive shaft built will be around $200.00 or $300.00
#11
In-Zane Moderator
iTrader: (25)
My 6.0 in my 89 was:
700$ engine
Intake and MSD box 6010 controller 600$
Pan 125$ with pickup and tray
T56 was 1100$
For you, headers can be stock 5.0 headers and weld on the LS flanges for 60$
Otherwise, you can get a new carb for 50 and rebuild for 50, or a new carb, from 250 on up to 1200$, depending on what yu want/need.
Efi is too much for me and i can tune the MSD box tiimng on my cheap 200$ lap top no problem, no bigger injectors and no dyno tune by a pro needed.
700$ engine
Intake and MSD box 6010 controller 600$
Pan 125$ with pickup and tray
T56 was 1100$
For you, headers can be stock 5.0 headers and weld on the LS flanges for 60$
Otherwise, you can get a new carb for 50 and rebuild for 50, or a new carb, from 250 on up to 1200$, depending on what yu want/need.
Efi is too much for me and i can tune the MSD box tiimng on my cheap 200$ lap top no problem, no bigger injectors and no dyno tune by a pro needed.
#13
On The Tree
Thread Starter
iTrader: (6)
Join Date: Apr 2010
Location: la porte TX
Posts: 166
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the numbers and thanks for the support I felt like a traitor lol other things that need to be considered are fuel system brakes ecu and I don't want carved I want fuel injected and fanning Gage cluster
#16
On The Tree
iTrader: (14)
Join Date: May 2006
Location: Katy, TX
Posts: 167
Likes: 0
Received 0 Likes
on
0 Posts
no offense bro, but i really hate these cars now, after alle the bullshit trying to modify them nothing ever became like i wanted. granted these are 10 year old fbodys, try putting on an performance exhaust, yea right, get prothane mounts and your whole car vibrates more than some pornstars *****, or get deaf with true duals, 02 sensors blowing out every couple months, y pipe bang, rear end whine, headlight problems, cracked interiors, rattles that you can never ever find, lol the list continues..but hey at leat they look good and are cheap and fast as hell
#20
On The Tree
iTrader: (2)
Join Date: Mar 2009
Location: Houston/288
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
no offense bro, but i really hate these cars now, after alle the bullshit trying to modify them nothing ever became like i wanted. granted these are 10 year old fbodys, try putting on an performance exhaust, yea right, get prothane mounts and your whole car vibrates more than some pornstars *****, or get deaf with true duals, 02 sensors blowing out every couple months, y pipe bang, rear end whine, headlight problems, cracked interiors, rattles that you can never ever find, lol the list continues..but hey at leat they look good and are cheap and fast as hell