You guys suck 
Post your best welds!
Teching In
Joined: Dec 2012
Posts: 25
Likes: 0
From: Langdon,AB
Here is a hanger I was happy with..
Another..
Some more Ti. The colour is burnt into the tip I was welding to. No colour past straw in the weld or HAZ.
Here is some stainless Harness bar work...
A spoiler stiffener for an LS3 kit car
Roll cage welding
Welds inside 911TT exhaust
More Titanium. No brushing after welding.
Another..
Some more Ti. The colour is burnt into the tip I was welding to. No colour past straw in the weld or HAZ.
Here is some stainless Harness bar work...
A spoiler stiffener for an LS3 kit car
Roll cage welding
Welds inside 911TT exhaust
More Titanium. No brushing after welding.
Here is a hanger I was happy with..
Another..
Some more Ti. The colour is burnt into the tip I was welding to. No colour past straw in the weld or HAZ.
Here is some stainless Harness bar work...
A spoiler stiffener for an LS3 kit car
Roll cage welding
Welds inside 911TT exhaust
More Titanium. No brushing after welding.
Another..
Some more Ti. The colour is burnt into the tip I was welding to. No colour past straw in the weld or HAZ.
Here is some stainless Harness bar work...
A spoiler stiffener for an LS3 kit car
Roll cage welding
Welds inside 911TT exhaust
More Titanium. No brushing after welding.
Awesome work man!
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
very nice.
im actually working on making a custom y pipe right now for a custom ls swap.
using a mig tho. I bought a second hand tig and it broke down and had issues/ it worked fine at first. but didn't even last a yr. I know better than that. but im in the market for a quality tig right now.
im actually working on making a custom y pipe right now for a custom ls swap.
using a mig tho. I bought a second hand tig and it broke down and had issues/ it worked fine at first. but didn't even last a yr. I know better than that. but im in the market for a quality tig right now.
Here is some random fabrication I have done in the last 5 years.
1. GTR, R34 RB26 manifold, compatible with a/c, twin scroll
2. Supra, MKIV 2JZGTE 3.0 manifold with dump tubes
3. Oil Field part gets x-rayed and pull tested
4. Another oil field part S/S
1. GTR, R34 RB26 manifold, compatible with a/c, twin scroll
2. Supra, MKIV 2JZGTE 3.0 manifold with dump tubes
3. Oil Field part gets x-rayed and pull tested
4. Another oil field part S/S
Last edited by SNLPerformance; Sep 3, 2014 at 05:33 PM.
TECH Enthusiast
Joined: Nov 2011
Posts: 609
Likes: 6
From: jacksonville,fl
Ok, I'll play. A few first projects.
Aluminum bedcover was my first ever aluminum welding project , stainless sword blades was my first ever stainless welding project.
2009 Camaro nose grafted to el camino was my first ever thermo elastomeric olefin plastic welding job. Aluminum air scoop was my first mirror polished aluminum welding job.
Honestly I don't weld often enough to have perfected doing really excellent appearance weld beads, most stuff I do gets ground down & polished anyways, but I survive ok.
It takes better than average attention to penetration depth to be able to grind most of your weld off & then polish it.
Aluminum bedcover was my first ever aluminum welding project , stainless sword blades was my first ever stainless welding project.
2009 Camaro nose grafted to el camino was my first ever thermo elastomeric olefin plastic welding job. Aluminum air scoop was my first mirror polished aluminum welding job.
Honestly I don't weld often enough to have perfected doing really excellent appearance weld beads, most stuff I do gets ground down & polished anyways, but I survive ok.
It takes better than average attention to penetration depth to be able to grind most of your weld off & then polish it. Last edited by jlcustomz; Sep 16, 2014 at 04:52 PM.
Some of you guys are freaks! You weld like a machine! I will only post one of mine because I have nothing great to show. Been welding very part time over 3 years.
The TIG
The MIG
I am ready for the bad weld comments...
The TIG
The MIG
I am ready for the bad weld comments...
