Post pics of your garage / shop
#381
Staging Lane
iTrader: (2)
Join Date: Feb 2007
Location: SoCal
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
This is a older pic. Cant really seen bench in back we made. And behind the boat is a little metal fab area. My hobart mig welder, bench grinder, band saw, and drill press. I added a 50 ft real for air hose, and a new tool box. Yea, thats a fishing boat behind the ta.
I visit from SoCal occasionally.
Nice garage.
Ryph
#384
10 Second Club
iTrader: (5)
Thanks for the compliment.
Granted the garage isn't exactly easy to work in with 3-cars, 2 fridges, workbench, tool box, but it fits the bill for getting all three cars inside during bad weather.
It's a great feeling getting into the car with the garage at 60 degrees and it's a whopping 20 degrees outside.
Granted the garage isn't exactly easy to work in with 3-cars, 2 fridges, workbench, tool box, but it fits the bill for getting all three cars inside during bad weather.
It's a great feeling getting into the car with the garage at 60 degrees and it's a whopping 20 degrees outside.
#385
11 Second Club
iTrader: (12)
Join Date: May 2005
Location: Cedar Rapids, IA
Posts: 1,142
Likes: 0
Received 0 Likes
on
0 Posts
well, the rest of everyones here puts mine to shame. Its my first house though and my first garage. 32x24 with 9 ft ceilings. Gets the job done for now. I so far have installed a heater for the winter, a/c for the summer, a deep freeze, big screen, refridgerator, and all the wall cabinets. Still needs drywall and a lift.
#387
TECH Apprentice
iTrader: (9)
Join Date: Mar 2005
Location: Jamison, Pa
Posts: 306
Likes: 0
Received 0 Likes
on
0 Posts
My garage
Here's a shot of my garage. I added it when we were doing some other changes to the house. It's 24x32 with a 12x32 deck on one side and the other side is open to the top (about 20').
It's got 220v for the welder, lift and compressor. and the lift is a Mohawk A7. The pictures were from when it was being finished.
Bob K.
It's got 220v for the welder, lift and compressor. and the lift is a Mohawk A7. The pictures were from when it was being finished.
Bob K.
#389
UNDER PRESSURE MOD
iTrader: (19)
I wish my garage was that big!!! The next one will be at least 26x26 for just my car leaving the current garage for just the daily drivers.
well, the rest of everyones here puts mine to shame. Its my first house though and my first garage. 32x24 with 9 ft ceilings. Gets the job done for now. I so far have installed a heater for the winter, a/c for the summer, a deep freeze, big screen, refridgerator, and all the wall cabinets. Still needs drywall and a lift.
#390
#391
TECH Fanatic
iTrader: (9)
Join Date: Dec 2006
Location: Va Beach
Posts: 1,240
Likes: 0
Received 0 Likes
on
0 Posts
Wow... some killer setups in this thread. I've got a 20x20 2 car on my house. Next house will have a 3 car setup minimum... preferably a 2 car attached w/ a 3 or 4 car detached shop.
Some older pics taken after I finished the walls/checkerboarding. Have new cabinets and peg board etc. now.
Current view into the garage
Some older pics taken after I finished the walls/checkerboarding. Have new cabinets and peg board etc. now.
Current view into the garage
#394
TECH Fanatic
iTrader: (9)
Join Date: May 2005
Location: Long Island, NY
Posts: 1,248
Likes: 0
Received 0 Likes
on
0 Posts
I just got a shop with my buddy in an industrial park near my house. Definitely not the best layout but it gets the job done. Gives us a place to store our cars and keep them out of the bad weather. More pictures are coming soon when we clean it up and fully set it up.
Last edited by Mike00ss; 12-28-2008 at 09:07 PM.