99 Corvette 427 Stroker 600+ hp $19.9K
09-26-2009, 04:07 PM
#1
Staging Lane
Thread Starter
Join Date: Jul 2006
Location: Louisvlle, KY
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
99 Corvette 427 Stroker 600+ hp $19.9K 1999 FRC Corvette Torque Monster ! ! !
VIN# 1G1YY12G0X5116168
White Exterior/ Black interior
Approx. 117k miles on car ONLY 8K on the motor/trans
427ci stroker motor, (Callies crank, rods, Diamond pistons)
CNC'd L92 heads
L76 intake
90MM throttle body
NEW - 12mm upgraded 04’ torque tube
RPM6 cam .244/.248 .612/.615 114+2LSA
NEW - Ram dual disk clutch
New - Tick adjustable master cylinder
Hardened output shaft
Rear-end brace and cover
Kooks stainless headers 1 7/8 primary and 3" collectors, x pipe and corsa exhaust
Edelbrock IAS shocks
Grand Sport Wheels 17x11 rears and 17 x 9-1/2 fronts
Good tires, Better than 1/2 life left in them.
So much more… will fill you in if your seriously interested.
525 tq/hp to the rear wheels ! ! !
Dyno tuned Pump gas and super safe tune 22* total timing.
$15k invoice from Real Performance Motorsports.
No supercharger or turbo charger issues to worry about here. You can always add one to this motor later if you want and its built for it. Bolt on a procharger or nitrous for 800 PLUS safe hp to the wheels later. Quicker than the new Z-06 vette and viper ! ! !
Car is raised up due to my driveway dipping before it hits the street. Better to be a little high than rub everytime I come and go.
You can lower it quite a bit if you want to easily.
20k
Will
Idle video: http://videos.streetfire.net/video/M...FRC_688819.htm
VIN# 1G1YY12G0X5116168
White Exterior/ Black interior
Approx. 117k miles on car ONLY 8K on the motor/trans
427ci stroker motor, (Callies crank, rods, Diamond pistons)
CNC'd L92 heads
L76 intake
90MM throttle body
NEW - 12mm upgraded 04’ torque tube
RPM6 cam .244/.248 .612/.615 114+2LSA
NEW - Ram dual disk clutch
New - Tick adjustable master cylinder
Hardened output shaft
Rear-end brace and cover
Kooks stainless headers 1 7/8 primary and 3" collectors, x pipe and corsa exhaust
Edelbrock IAS shocks
Grand Sport Wheels 17x11 rears and 17 x 9-1/2 fronts
Good tires, Better than 1/2 life left in them.
So much more… will fill you in if your seriously interested.
525 tq/hp to the rear wheels ! ! !
Dyno tuned Pump gas and super safe tune 22* total timing.
$15k invoice from Real Performance Motorsports.
No supercharger or turbo charger issues to worry about here. You can always add one to this motor later if you want and its built for it. Bolt on a procharger or nitrous for 800 PLUS safe hp to the wheels later. Quicker than the new Z-06 vette and viper ! ! !
Car is raised up due to my driveway dipping before it hits the street. Better to be a little high than rub everytime I come and go.
You can lower it quite a bit if you want to easily. 20k
Will
Idle video: http://videos.streetfire.net/video/M...FRC_688819.htm
Last edited by _Syclone_; 11-11-2009 at 03:24 PM. Reason: added pics
09-28-2009, 06:43 PM
#6
Staging Lane
Thread Starter
Join Date: Jul 2006
Location: Louisvlle, KY
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
10-03-2009, 01:53 PM
#16
Staging Lane
Thread Starter
Join Date: Jul 2006
Location: Louisvlle, KY
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts
10-03-2009, 02:32 PM
#18
Staging Lane
Thread Starter
Join Date: Jul 2006
Location: Louisvlle, KY
Posts: 51
Likes: 0
Received 0 Likes
on
0 Posts