1968 lq9 powered camaro
#1
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Location: memphis, tn
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
1968 lq9 powered camaro
here is a link to my 1968 camaro with a lq9/4l60e setup for possible trade depending whats out there, the car as you can see in the link has been fully redone up to the point which you see in the link below. let me know if any interest. as you can see it needs very little to be complete.
http://www.racevideoforums.com/forum...ss-camaro.html
http://www.racevideoforums.com/forum...ss-camaro.html
#3
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Location: memphis, tn
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
ok for all the pm's i am getting here is a summary of what is left to do, i have touched every part on this car, and off the top of my head this is what is left to do, i am still doing stuff to the car.
wiring will be complete this weekend, what the car needs to be complete starting from front to back, radiator, transcooler, plugs, plug wires, driveshaft, and that will finish the drivetrain. interior needs guages speedometer, tach, gas, oil, and water, headliner, doorpanels, and carpet. outside is ready for paint, door jams are painted black along with engine bay, as i am going gloss black with the car just not at that stage yet as that is the last thing i will do. i have all the taillights and misc outside parts, bumper, ect. but plan on replacing those with new. also need a new front windsheild, that sums up what it needs. after that it will be a completely new car. i may be missing some small things. ask if you need more info thanks
wiring will be complete this weekend, what the car needs to be complete starting from front to back, radiator, transcooler, plugs, plug wires, driveshaft, and that will finish the drivetrain. interior needs guages speedometer, tach, gas, oil, and water, headliner, doorpanels, and carpet. outside is ready for paint, door jams are painted black along with engine bay, as i am going gloss black with the car just not at that stage yet as that is the last thing i will do. i have all the taillights and misc outside parts, bumper, ect. but plan on replacing those with new. also need a new front windsheild, that sums up what it needs. after that it will be a completely new car. i may be missing some small things. ask if you need more info thanks
#4
pm sent... I'm pretty serious depending on what trade value you think this is worth (ie...are you looking for a fbody or a c6 vette?) I just want to know where you at, it probably help lowballs too.
#7
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Location: memphis, tn
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
im in memphis, tn. most of the computer wiring is done i worked on it today. as far as trades i am not interested in f-bodys as i have 2 already and no trucks got one of those already to. never had a vette before. if nothing comes available i will just continue with the 68 camaro and enjoy it as a finished new ride. thanks everyone for looking. here is a photoshop of what i am shooting for once completed, i have billet side mirrors instead of chrome ones, plus i am leaving the front bumper off and adding a lower airdam. enjoy
Last edited by BIRDONNOS; 11-11-2009 at 04:43 PM. Reason: pic added
Trending Topics
#10
TECH Senior Member
iTrader: (6)
#12
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Location: memphis, tn
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
car now has the radiator and transcooler installed, all the wiring is complete. all that is needed now to crank the car is plugs, wires and oil and oil filter. thanks
#13
11 Second Club
Thread Starter
iTrader: (3)
Join Date: Feb 2004
Location: memphis, tn
Posts: 298
Likes: 0
Received 0 Likes
on
0 Posts
video of the car running, all that the car needs to be complete is a final block sand then paint, (car will be paintedd gloss black the first of the new year) front and rear windshield, carpet, door panels and headliner, plus a speedometer and tach.
http://www.youtube.com/watch?v=7jwu3gDVovM
http://www.youtube.com/watch?v=7jwu3gDVovM
Last edited by BIRDONNOS; 12-14-2009 at 05:06 PM.