vegasse

Year: 2003
Make: Ford
Model: Mustang Cobra
Price: $44000
Mileage: 27000
Private or Dealer Listing: Private Listing
Location (State): NV
Color: Black
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has other engine

2003 Mustang Cobra
28k Miles
No accidents
Clean title in hand
Freshly painted in Dupont Single Stage Hot Rod black including all door jams, etc….

Vehicle was completely assembled by Insane Speed of Las Vegas.


Exterior:

Full color change in Dupont Single Stage Hot Rod Black (No runs or streaking)
Headlights, Taillights, and markers professionally blacked in flat
Bullet Wheels, painted satin black
Goodyear F1 tires 275/45/17 front
Mickey Thompson ET Street 315/35/17 rear
Calipers Painted Gloss Black


Chassis:

Certified 12pt WolfCraft 8.5 cage powdercoated black
Stock seats and interior
Brand New Black Carpet
VIS Cobra 3 inch Cowl Hood (latches in factory location)
Chevy Noose comes with :-p


Engine:

Fully built 5.1 Stroker by Lawless Engines
(Lawless built all engines for Hot Rod Fuller's NHRA Top Fuel Team)
Fresh Core
Block Bored
Honed with Torque Plates
Line Honed
Balanced + Pin Fit
Ford V8 4.6 LT Pistons
4340 Crank w/3.750 Stroke
JE Straight Wall Pins
Custom Performance Coated Rod Bearings
Clevite Main Bearings
ARP Main Studs

380cfm Lawless ported heads
(These heads are 100% hand ported with over 100 hours into them. They became the blueprint for Lawless’ full on CNC race head.)
Brand New Cores
Competition Port and Polish
Five angle valve job
Beehive valve springs
135.6 20 degree valves
116.3 30 degree valves
Ferrea Competition Valve Seats
Ferrea titanium retainers
Ferrea valve keepers
Ferrea spring seats
Ferrea spring locaters
Ferrea valve guides
ARP Head studs
Custom Grind Cams + Retainers
Ford 4.6 Head Gaskets
Maximum Motorsports Oil Filter Relocation
F1 Procharger Cog Driven


Cooling:

Custom Race Intercooler (Greddy Core)
Custom Aluminum Overflow Can
Custom Brushed IC Piping
Fluidyne radiator


Transmission + Drivetrain:

D&D Performance Viper Spec T56
Billet High Spline shafts
Fully Cryo'd Gears
Mcleod Street Twins Clutch
Upper Adjustable Clutch Quadrant
B+M Short Throw Shifter
Aluminum 1 piece driveshaft
Billet Rear Diff Bracing


Suspension:

Maximum Motorsports Complete K-Member Package
MM Tubular K-Member Brace
MM Front Control Arms
MM Urethane Bushings
MM Caster/Camber Plates
Bilstein Struts
MM Spherical Washer Rack Bushings
MM Lowered Sway Bar End Links
HyperCoil Coil Over Springs


Exhaust:

Kooks 1 3/4x3' Headers
Jet Hot Coating on Headers
Kooks 3 inch X-Pipe
SLP Stainless X-Pipe back


Electronics:

Weapon-X Xcop Ignition Coil Set
Diablo Computer


Fuel System + Intake:

Sullivan Performance Black Powdercoated Intake Manifold
Accufab Single Blade Throttle Body
Lethal Performance/Fore precision billet fuel hat W/ SINGLE 8an line
Twin Ford GT Super Car Fuel Pumps
Complete Sullivan Fuel System with 8an line front to back all with black earls an fittings
Aeromotive A1000 Fuel Pressure Regulator
Aeromotive 10AN Port Fuel Filter
Sullivan Polished Fuel Rails
Sieman Deka 63lb Flow Matched Injectors
Lethal Performance Dual Fuel Pump Driver Modules


Misc:

Flaming River Steering Shaft


To replicate this car will cost nearly $100,000 with the price of the car and complete color change. The engine ALONE will cost $25,000 to duplicate from Lawless. The car was completely wired and assembled by Insane Speed in Las Vegas and was tuned by Mike Angel of Insane Speed.

Everything is 100% brand new and has been broken in for 500 street miles before tuning. The car is complete and ready to hit the road.

I will consider partial trade for a clean 03-04 Cobra.

No mileage over 50k
No convertibles
No red or yellow cars.


$44,000 obo. Solid partial trade and cash deals considered.


Email me at ttgallardo@gmail.com. Videos and dyno graphs coming soon.

vegasse

lethal bird

iTrader: (12)

Sexy!!!

mynameisray

iTrader: (4)

looks like its ready for paint! nasty mods though glws

dsmtrance

iTrader: (6)

Man that's a lot of coin for an 03 Cobra. That being said, that's probably the sickest Termi I've seen!! GLWS

FEARR

Why build this car and not even drive it? I dont understand some people. You put your heart and soul into something and let it go like a bad habbit? After building Fear, there was no way anytime soon that car was going anywhre but down the track fast!@ Nice car!

LSWONCOOP

iTrader: (5)

Man, that car is awesome. $48k though?? Obama wouldn't even give you that much and he hands out money to anybody that'll ask for it.

vegasse

I guess it depends on the quality of build you want. This isn't a bolt on, stock motor, stock trans, etc....type of car. It's a full built, 100% of everything new, six figure build to replicate. Frankly, I'm giving the car away compared to what it cost to build. ANy customer that brought his own Termi in to get this work done would walk out with a LOT bigger bill than 48k even supplying the car.

LSWONCOOP

iTrader: (5)

Yeah, I agree. I'm not trying to harass you or anything. You're just gonna need a very specific customer looking for that type of car with a very large bank acct or a very rich daddy. Haha. I'm sure he's out there though. Good luck with the sale man. It really is a slick car and I bet it's INSANE on the road! Wish I had it!

meine96ws6

iTrader: (4)

sick car with a sick list of parts on it... man if i hit the lottery..

vegasse

Thanks man. I know it's a pretty over the top car for most people, even those looking for a fast Terminator, but for the guy who wants the very best....here it is for half what it cost to build it.

NXPRSS

iTrader: (23)

Nice car, just curious, what did the car dyno? and any track times? GLWS..

vegasse

It makes 808rwhp at 21psi. I know the engine can run 8500 without issue, but the highest I wanted to push it was 7500rpm. This is with the small cog set up. The smaller cog will easily make 1000rwhp. As for track times, we built it as a street car and I doubt it would fare too well on the 315/35/17 Mickey's that are on it. I'll have some videos and dyno graphs up this week.

vegasse

Someone will get a great car for less than half what it cost to build. I'm also open to trades.

Partial trade for low mileage 03/04 Cobra, stock or close.

Trade straight up for a Kona Blue or Black 2010 or 2011 GT500.

Trade straight up for a 600+rwhp 08-10 GT500 Blue or Black.

5 point 1

And I thought that me asking $23k for my car was a bit much. Your asking for almost double that! And everything in my car is built as well. Waiting for it to come off the dyno this week. Hopefully mid 800's rwhp now, but with a boost leak it already made 785rwhp. And as far as being able to run your stroker motor to 8500 rpm's, LOL! The piston skirts would **** a lot of **** up before you get that high, lol.

vegasse

You have receipts for over $100,000 on a car with only 500 miles on the build and you are asking 23k? Link me, I'll buy your car instantly if you what you say is true and you can provide the necessary documentation. No joke.

5 point 1

I think you got RIPPED if you spent over $100,000 on that set up...

roach4047

Not trying to be smart or anything but I've often wondered why guys put so much money and effort into these sort of projects and then turn around and sell them so quickly for far less money than they've invested?

Was the car built as a demo car for a SEMA show or something? Did it serve some sort of purpose like that? How else can you possibly explain building it and pouring so much time, money and effort otherwise?


Roach

schlong connery

Am I missing something or why was this car converted to a centrifugal supercharger?

and whats going on with the hood, it doesnt fit.

5 point 1

I really like that hood, imho. But God, all that money into that car, and it's got the shitty looking wheels. Also, what's up with the front tires being too wide for the front rims? Everything else on that car is SEX, minus the headlights <----- just personal preference...