2003 Z06 Over $30,000 in upgrade parts, original owner
04-04-2011, 12:12 AM
#1
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Palm Beach Gardens, FL
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
2003 Z06 Over $30,000 in upgrade parts, original owner Year: 2003
Make: Chevrolet
Model: Corvette
Price: $10000000
Mileage: 19000
Private or Dealer Listing: Private Listing
Location (State): FL
Color: Yellow
Transmission: Manual
Drivetrain: Rear Wheel Drive
LS Engine?: Car has LS engine
Price as of 6/20/11 is $26,500 and doesn't include CCW rims, Movit (Brembo) Monoblock Brakes, or T1 Bars.
My Z06 currently has 19,000 miles. I am the original owner who purchased it new as a leftover 03 model from Spitzer Chevrolet in Ohio in November 2004. It was enclosed transported to South Florida where it has been garaged since day 1 of ownership. The car has never been in an accident and has never had any bodywork or paintwork. There is a small cut in the plastic below the left front duct inlet from a trailer ramp when loading it on my trailer, but that's it. It shines and looks almost new. The large number four on the doors is a removable decal.
Over $30,000 has been spent on parts alone in upgrades. The chassis was set up by Orbit Racing and motor tuned my Mike Norris. On last tune it dynoed at 485 rwhp and 475 rwtq.
Current engine has under 6000 miles, brake system 4000 miles, and transmission/clutch setup 2000 miles.
PICS below
Video with audio of motor at http://img42.imageshack.us/img42/4374/iw9.mp4 and http://img405.imageshack.us/img405/4858/pcm.mp4
List of upgrades:
LS2 bored and stroked 408 cubic inch aluminum motor with forged internals, main girdle, milled DART heads with Cometic gaskets giving 11.25:1 compression, ARP studs and connectors, Harland Sharp 1.7 roller rocker arms, dual valve springs, Katech painted valve covers with coil relocation kit, 25% underdrive pulley, LS6 intake, ported/polished throttle body, 42 lb injectors, Elite Engineering oil catch can, Custom road-racing cam CAD-designed by Dave Crower with specs-238/246 .622/.609 112+4 Torque Monster!!! $12,000
Vararam ram air intake with big air bridge and K&N filter $500
Doug Rippie Motorsports Bilstein coilovers (rebuilt less than 4000 miles ago) $1800
DRM spindle ducts with brake ducts $500
Stock Z06 brakes with Z06 pads, SS lines
Z06 swaybars
Harness bar and 4 pt harnesses with Hardbar mounts $800
Custom aluminum shift gate with Hurst short throw shifter and Hardbar Delrin **** $400
Custom Elite Engineering gas pedal for proper heel/toe shifting $95
RPM level 5 2005 T56 MN12 six-speed transmission with tranny cooler $3000
Stock rear differential with 3.42 gears
Spec Twin dual disk clutch with adjustable master cylinder and remote bleeder $1600
Scattershield over the flywheel/clutch $250
Elite Engineering Stainless Steel tunnel plate $240
Ron Davis Integrated Radiator/Oil cooler $1200
LG Super Pro Long tube headers without cats $1700
Stock Titanium Catback Exhaust
Trailer hitch for small trailer $250
Aluminum frame rails and front frame savers $250
Not included at this price are Brembo Monobloc big brake kit modified for Corvette by Movit with 370mm front/345mm rear 3 piece rotors ($3000 extra) CCW C14 18" one piece forged aluminum rims ($1500 extra).
Available spare parts include a set of polished 18" Fikse FM/5 wheels (one needs repair),
Sparco Evo 2 racing seat with Hardbar mounts, Corsa Indy Cat back exhaust,
custom wheel spacers, many spare Hoosier VRL slicks, stock brake kit, stock titanium catback exhaust, stock air intake, spare brake pads for track use, and numerous other small parts in my garage.
This car will not disappoint and is very reasonably priced. Email all questions to chillimd@comcast.net. Thanks.
Bill Heitman
Last edited by Dr Chill; 07-02-2011 at 02:50 PM.
04-20-2011, 08:00 PM
#3
were did u get that custom shiter and console set up to the shifter can i get that on my stock t56 in a 2004 c5 zo6?i want to get that ... it looks fxxxng killer nice car glws.....bad *** car
04-20-2011, 10:21 PM
#4
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Palm Beach Gardens, FL
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
06-20-2011, 09:55 PM
#5
Staging Lane
Thread Starter
iTrader: (1)
Join Date: Oct 2004
Location: Palm Beach Gardens, FL
Posts: 59
Likes: 0
Received 0 Likes
on
0 Posts
Price lowered. Going on ebay tomorrow night.
Motor is strong, very reliable, and clutch/tranny bulletproof. Car is beautiful and looks new. Someone will be getting a great deal on this car.
Motor is strong, very reliable, and clutch/tranny bulletproof. Car is beautiful and looks new. Someone will be getting a great deal on this car.
