'00 Camaro SS M6 383 Stroker in ATL
02-03-2009, 12:02 PM
#1
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Winston, GA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
'00 Camaro SS M6 383 Stroker in ATL Looking for a quick sale, just trying to pay off what I owe and make a good down payment on an '02 Z06 at my local dealership. There are a couple minor issues with the car listed below, like I said I'm looking for a quick sale and I don't have the time to mess with it right now.
$10,000 FIRM
Car is a 2000 SS M6 with 81XXX Miles. Located in Winston, GA, just outside of Atlanta. Less than 10,000 miles on the motor.
Factory Options
Leather
Power Seat
Power Windows
Keyless Entry
Cruise Control
Monsoon Premium Sound
Powertrain
Eagle Forged 383 Rotating Assembly:
Eagle 4340 Crank
Eagle H-Beam Rods
Arias Forged Pistons 11:1 CR
Thunder Racing Custom Grind Cam 249/257 .652/.622 110LSA
Comp Hardened Pushrods
Patriot Extreme Dual Valvesprings
LS7 Lifters w/ Stock Rockers
Stock heads with mild bench porting by Bishop Automotive
PP 85mm Typhoon Intake
PP 85mm Typhoon Throttle Body
PP Anodized High Flow Fuel Rails
Stock Injectors
LS6 Oil Pump
ASP 25% Underdrive Pulley
Kooks 1 3/4" Longtubes
Texas Speed Rumbler x-Pipe
Sweet Thunder Chambered Mufflers (turned down in front of rear end)
!EGR
!AIR
MSD Wires
Custom Tune by MTI Racing
Drivetrain
RAM HDX Clutch (Drill mod, McLeod Adl. Master Cylinder)
GM 4:10 Gears
T/A Aluminum Girdle
Stock T-56
Stock Driveshaft
Suspension
BMR Adj. Torque Arm
BMR Tubular Lower Control Arms
BMR Adj. Panhard Bar
Eibach Pro Springs
Stock Bilsteins
Interior
Matrix Front Seats, cloth
B&M Ripper Short Shifter
Boost/Vac and A/F Ratio Guage on A-pillar
Pioneer Head Unit w/ Aux Hookup
Exterior
ZR1 Wheels
Not shown in the pics, but the car has clear corner lights on it now
A little paint here and there, its all in the pics
The Bad
-There is no A/C on the car, but I have all the parts and they will go with the car
-Needs Second Gear Synchro
-There is a small knick in the center of the decklid, but no one ever sees it until I point it out
- Needs driver side window motor
Dynoed at 405/400 at MTI in Marietta through stock heads. This car has a bulletproof bottom end and is a perfect foundation for a very fast street or track car.
$10,000 FIRM
Car is a 2000 SS M6 with 81XXX Miles. Located in Winston, GA, just outside of Atlanta. Less than 10,000 miles on the motor.
Factory Options
Leather
Power Seat
Power Windows
Keyless Entry
Cruise Control
Monsoon Premium Sound
Powertrain
Eagle Forged 383 Rotating Assembly:
Eagle 4340 Crank
Eagle H-Beam Rods
Arias Forged Pistons 11:1 CR
Thunder Racing Custom Grind Cam 249/257 .652/.622 110LSA
Comp Hardened Pushrods
Patriot Extreme Dual Valvesprings
LS7 Lifters w/ Stock Rockers
Stock heads with mild bench porting by Bishop Automotive
PP 85mm Typhoon Intake
PP 85mm Typhoon Throttle Body
PP Anodized High Flow Fuel Rails
Stock Injectors
LS6 Oil Pump
ASP 25% Underdrive Pulley
Kooks 1 3/4" Longtubes
Texas Speed Rumbler x-Pipe
Sweet Thunder Chambered Mufflers (turned down in front of rear end)
!EGR
!AIR
MSD Wires
Custom Tune by MTI Racing
Drivetrain
RAM HDX Clutch (Drill mod, McLeod Adl. Master Cylinder)
GM 4:10 Gears
T/A Aluminum Girdle
Stock T-56
Stock Driveshaft
Suspension
BMR Adj. Torque Arm
BMR Tubular Lower Control Arms
BMR Adj. Panhard Bar
Eibach Pro Springs
Stock Bilsteins
Interior
Matrix Front Seats, cloth
B&M Ripper Short Shifter
Boost/Vac and A/F Ratio Guage on A-pillar
Pioneer Head Unit w/ Aux Hookup
Exterior
ZR1 Wheels
Not shown in the pics, but the car has clear corner lights on it now
A little paint here and there, its all in the pics
The Bad
-There is no A/C on the car, but I have all the parts and they will go with the car
-Needs Second Gear Synchro
-There is a small knick in the center of the decklid, but no one ever sees it until I point it out
- Needs driver side window motor
Dynoed at 405/400 at MTI in Marietta through stock heads. This car has a bulletproof bottom end and is a perfect foundation for a very fast street or track car.
Last edited by SStrokeME00; 06-27-2009 at 04:12 PM.
02-03-2009, 04:02 PM
#6
I think they might be trying to drop a hint on you; as per the forum rules, a price must be posted. This is probably to prevent the thread from turning into a turd as low ball offers get tossed out, seller takes offense, etc.
Trending Topics
02-03-2009, 05:37 PM
#9
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Winston, GA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
The boost/vac guage is there because my original intent was to boost it, but just before I did it ate a rod bearing so I spent the money on stroking it instead. I couldn't find anyone that wanted the guage so I just kept it. It reads vacuum so I guess its still somewhat functional lol. And I wish I had the stock seats, if I did they would be in it. I bought the car with no passenger seat and one p.o.s. Corbeau for a driver seat. I got those through a friend for next to nothing.
06-08-2009, 09:43 PM
#20
Teching In
Thread Starter
iTrader: (1)
Join Date: Jan 2008
Location: Winston, GA
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
It is CLEARLY stated at the VERY TOP of the ad I would like to TRADE for a black 6 spd SS. All you lowballing ******** know what the car is worth and are doing so just to be dicks. If you're not going to say anything constructive in your response dont waste your time posting a reply.