Back up for sale cheapp firehawk, 9", lots of mods...
05-24-2009, 11:03 AM
#1
10 Second Club
Thread Starter
iTrader: (35)
Join Date: Aug 2005
Location: paducah, ky
Posts: 573
Likes: 0
Received 0 Likes
on
0 Posts
Back up for sale cheapp firehawk, 9", lots of mods... Well guys Back up for sale for good is my Firehawk (1999), car is verry verry nice and beleive me I have a ton of money in the car! My loss is your gain... I change all changable fluids after about every time I run the car hard... Or oil at about every 1k miles... the only thing you will not be getting of the car as shown in pics is the bogart wheels, It will have slp factory firehawk wheels with goodyear egle tires....
Well let me start I have had this car for a few years now, I lost my license Last novemeber and started modding the car with 114k miles on it, now has around 115k... I just got my license back so I have been driving it so it is verry streetable!!!! I need to get rid of it to finish of another project and pay some bills etc.... I am also interested in trades though... Just lmk what you have!
The car Put down 504 rwhp and 540 foot pounds of torque on a 125 shot as now it has a 150 shot so should be around 530 rwhp and around 575 to 600 rear wheel torque....
I also have track times on the car but not any yet with the new 9" rear end with 4.11's..... Car went 7.0 with a 1.4 60ft time on stock 10 bolt, and 3.42 gears
I beleive the car is honestly capable of 6.7-6.80's THat is turning the car at 6k which it makes max power at 6800 but I never run it to 6800 to be safe on the motor... Now for the mods!
Autometer shift light
TDP stage 3 Clutch
B&M Ripper Shifter
BBK SSI Intake
BBK Throttle Body
SLP MAF
Powerbond Underdrive Pulley
Tick Performance Polluter Cam
Patriot Dual Valve Springs
Hardened Pushrods
LS6 Ported Oil Pump
Long Tube Headers
Y-Pipe
QTP Electric Cutout
SLP Lid
Factory SLP catback
MSD Plug Wires
MSD Coil Packs
Thunder Racing Line Lock
F.A.S.T Fuel Rails
NX Fogger Nitrous Kit W/Purge , and heater....
Ford 9" rear end, Full spool, 4.11 gears
BMR lower control arms
BMR lower control arm relocators
BMR Extreme Anti roll bar
Adjustable torque arm
adjustable panhard bar
Custom made switch pannel in car for all switches Verry nice made by beer99c5
Im Sure I am Forgetting some things but that is all that comes to mind.... This care is verry rare, I have all original paper work, owners manuel, build sheet, Dyno sheets, Birth Certificate, Etc... I also have all the factory parts that has come of the car since i have done all the mods to it!!!!
ASKING 12,700 FIRM FIRM FIRM.....
YOU CAN ALSO CALL ME AT 270-994-3702
MAJOR MAJOR PRICE DROP ..... I NEED IT GONE TO BUILD THE QUAD!!!! ILL TAKE $10,700 verrrrryyyy firm....
Well let me start I have had this car for a few years now, I lost my license Last novemeber and started modding the car with 114k miles on it, now has around 115k... I just got my license back so I have been driving it so it is verry streetable!!!! I need to get rid of it to finish of another project and pay some bills etc.... I am also interested in trades though... Just lmk what you have!
The car Put down 504 rwhp and 540 foot pounds of torque on a 125 shot as now it has a 150 shot so should be around 530 rwhp and around 575 to 600 rear wheel torque....
I also have track times on the car but not any yet with the new 9" rear end with 4.11's..... Car went 7.0 with a 1.4 60ft time on stock 10 bolt, and 3.42 gears
I beleive the car is honestly capable of 6.7-6.80's THat is turning the car at 6k which it makes max power at 6800 but I never run it to 6800 to be safe on the motor... Now for the mods!Autometer shift light
TDP stage 3 Clutch
B&M Ripper Shifter
BBK SSI Intake
BBK Throttle Body
SLP MAF
Powerbond Underdrive Pulley
Tick Performance Polluter Cam
Patriot Dual Valve Springs
Hardened Pushrods
LS6 Ported Oil Pump
Long Tube Headers
Y-Pipe
QTP Electric Cutout
SLP Lid
Factory SLP catback
MSD Plug Wires
MSD Coil Packs
Thunder Racing Line Lock
F.A.S.T Fuel Rails
NX Fogger Nitrous Kit W/Purge , and heater....
Ford 9" rear end, Full spool, 4.11 gears
BMR lower control arms
BMR lower control arm relocators
BMR Extreme Anti roll bar
Adjustable torque arm
adjustable panhard bar
Custom made switch pannel in car for all switches
Verry nice made by beer99c5Im Sure I am Forgetting some things but that is all that comes to mind.... This care is verry rare, I have all original paper work, owners manuel, build sheet, Dyno sheets, Birth Certificate, Etc... I also have all the factory parts that has come of the car since i have done all the mods to it!!!!
ASKING 12,700 FIRM FIRM FIRM.....
YOU CAN ALSO CALL ME AT 270-994-3702
MAJOR MAJOR PRICE DROP ..... I NEED IT GONE TO BUILD THE QUAD!!!! ILL TAKE $10,700 verrrrryyyy firm....
Last edited by domestic disturbance; 07-13-2009 at 12:05 PM.
Trending Topics
05-26-2009, 10:41 AM
#11
Staging Lane
Join Date: Feb 2009
Location: Cleveland, OH
Posts: 63
Likes: 0
Received 0 Likes
on
0 Posts
05-26-2009, 11:48 PM
#15
Teching In
Join Date: Feb 2008
Location: Whitesburg,Kentucky
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
interested in my 2004 SS silverado??
couple goodies?
-22" inch cruiser rims wrapped in 90% nitto 420s tires.
-2" belltech drop.
-Hypertech3 power programmer
-K&N F.I.P.K cold air intake freshly recharged.
-Comp 918 hardened push rods
-Comp 'GOLD' roller Rocker arms
-Ported and Polished stock heads (small HP gain)
-BRAND NEW nitrous kit, set up for 150 shot.
-2 chrome 10lb bottles mounted under seats.
-90mm throttle body
-90mm M.A.F
-MotoBlue Throttle body spacer.
-MSD plugs and wires
-Dual Flomaster super 44's side exit before right rear tire
-Pioneer touch screen flip up DVD player.
-2 12" kickercomp cvx's under rear seat
-2000 watt kicker amp
-Black Bowtie
-Custom painted Black grill & SS scoops in bumper
-Flush mount street scene bed cover painted to match
couple goodies?
-22" inch cruiser rims wrapped in 90% nitto 420s tires.
-2" belltech drop.
-Hypertech3 power programmer
-K&N F.I.P.K cold air intake freshly recharged.
-Comp 918 hardened push rods
-Comp 'GOLD' roller Rocker arms
-Ported and Polished stock heads (small HP gain)
-BRAND NEW nitrous kit, set up for 150 shot.
-2 chrome 10lb bottles mounted under seats.
-90mm throttle body
-90mm M.A.F
-MotoBlue Throttle body spacer.
-MSD plugs and wires
-Dual Flomaster super 44's side exit before right rear tire
-Pioneer touch screen flip up DVD player.
-2 12" kickercomp cvx's under rear seat
-2000 watt kicker amp
-Black Bowtie
-Custom painted Black grill & SS scoops in bumper
-Flush mount street scene bed cover painted to match
