Selling my car.. 1998 Trans am Ws6, m6, nitrous, 19's, alot to list
08-04-2009, 10:06 PM
#1
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2007
Location: New Hampshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
Selling my car.. 1998 Trans am Ws6, m6, nitrous, 19's, alot to list Can't believe i'm selling this car, but I found a new ride I want pretty bad. I'm trying to sell asap because I don't want to miss out on a deal on the next car. If it doesn't sell by the time that car sells i'm keeping it. Anyways here it goes..
Car Info
-1998, Silver, has charcoal leather, in good shape. 6 Speed, t-tops, Just over 100k, Maintained very well, cleaned every week. Clean title in hand.
Exterior is probably about a 9/10
Interior is also about a 9/10
Transmission/Rear end
-Car was just converted to a 6 speed
-Built t56 by slowhawk
-Monster Stage 3 Clutch
-Brand new Slave
-Brand new master (needs to be installed, not a lot of clutch pressure)
-Brand new flywheel
-All transmission parts have about 10 miles on them. The car was driven from the shop, transmission shifts smooth, runs great. This setup set me back well over $2,000.
-30k mile 10 bolt with 3:73's - No whine at all
Wheels/Tires/Brakes
-BRAND NEW Ruff Racing 279's chrome 19x8.5 front 19x9.5 rear.
-Tires are BRAND NEW 255-35-19 front 285-30-19 rear.
-3 miles maybe on wheels. Still have stickers. Just balanced new lugs. This just set me back about another $2,000.
-Cross Drilled and slotted rotors, pretty new pads, red painted calipers.
Engine/Misc. Performance/Exhaust
-Ported and Polished 241 casting heads (uninstalled)
-Comp 230/226 .573/.570 113+2 Cam (uninstalled)
-QTP Long tubes, Fake Cats, QTP E-Cutout, flowmaster cb, Chrome camaro tips
-LS6 Intake manifold painted silver
-Ported Polished Throttle Body painted black
-42# Injectors
-SLP lid, K+N Filter
-Free Mods
-AC! AIR! EGR!
Nitrous
-HSW single nozzle dry nitrous setup. Installed by Vinny from 860 Performance
-100 jet currently installed
-FPSS
-860 bottle mount/heater
-Purge by windshield
-Digital Window Switch
-CUSTOM airbrushed bottle, looks awesome
-CUSTOM backseat mount
-Nitrous Outlet Switch Panel
-Picked up 99wrhp on the dyno before 6 spd swap
Appearance
-CETA mod (Back bumper painted black)
-Blackbird Stripes
-Windshield Banner
-Chrome grill inserts as well as chrome letter fills
-20% tint all around
Interior
-In dash television
-Playstation 2 hooked up and included
-2 12" Polk audio subs in custom box
-MTX Amp
-Chrome door sills
Maintenance
-Fresh fully synthetic oil change, all other fluids are fresh and new
-New plugs (NGK TR6) at 100k
-New Plug wires
-New Fuel Filter
-Pretty recent alignment
-93 Octane only ever ran
(I'm sure I'm missing some things also)
I am looking to get $8,500 FIRM. Like I said this isn't going to be posted for long. If it doesn't sell, which i'd be shocked, by the time the car i want does.. I'll keep it. I have invested thousands and thousands into this car and it really is sad to see it go. I'm sure I will get back into the ls1 game another day. The car is located in Southern New Hampshire. My name is Jared.
Car Info
-1998, Silver, has charcoal leather, in good shape. 6 Speed, t-tops, Just over 100k, Maintained very well, cleaned every week. Clean title in hand.
Exterior is probably about a 9/10
Interior is also about a 9/10
Transmission/Rear end
-Car was just converted to a 6 speed
-Built t56 by slowhawk
-Monster Stage 3 Clutch
-Brand new Slave
-Brand new master (needs to be installed, not a lot of clutch pressure)
-Brand new flywheel
-All transmission parts have about 10 miles on them. The car was driven from the shop, transmission shifts smooth, runs great. This setup set me back well over $2,000.
-30k mile 10 bolt with 3:73's - No whine at all
Wheels/Tires/Brakes
-BRAND NEW Ruff Racing 279's chrome 19x8.5 front 19x9.5 rear.
-Tires are BRAND NEW 255-35-19 front 285-30-19 rear.
-3 miles maybe on wheels. Still have stickers. Just balanced new lugs. This just set me back about another $2,000.
-Cross Drilled and slotted rotors, pretty new pads, red painted calipers.
Engine/Misc. Performance/Exhaust
-Ported and Polished 241 casting heads (uninstalled)
-Comp 230/226 .573/.570 113+2 Cam (uninstalled)
-QTP Long tubes, Fake Cats, QTP E-Cutout, flowmaster cb, Chrome camaro tips
-LS6 Intake manifold painted silver
-Ported Polished Throttle Body painted black
-42# Injectors
-SLP lid, K+N Filter
-Free Mods
-AC! AIR! EGR!
Nitrous
-HSW single nozzle dry nitrous setup. Installed by Vinny from 860 Performance
-100 jet currently installed
-FPSS
-860 bottle mount/heater
-Purge by windshield
-Digital Window Switch
-CUSTOM airbrushed bottle, looks awesome
-CUSTOM backseat mount
-Nitrous Outlet Switch Panel
-Picked up 99wrhp on the dyno before 6 spd swap
Appearance
-CETA mod (Back bumper painted black)
-Blackbird Stripes
-Windshield Banner
-Chrome grill inserts as well as chrome letter fills
-20% tint all around
Interior
-In dash television
-Playstation 2 hooked up and included
-2 12" Polk audio subs in custom box
-MTX Amp
-Chrome door sills
Maintenance
-Fresh fully synthetic oil change, all other fluids are fresh and new
-New plugs (NGK TR6) at 100k
-New Plug wires
-New Fuel Filter
-Pretty recent alignment
-93 Octane only ever ran
(I'm sure I'm missing some things also)
I am looking to get $8,500 FIRM. Like I said this isn't going to be posted for long. If it doesn't sell, which i'd be shocked, by the time the car i want does.. I'll keep it. I have invested thousands and thousands into this car and it really is sad to see it go. I'm sure I will get back into the ls1 game another day. The car is located in Southern New Hampshire. My name is Jared.
08-05-2009, 12:55 PM
#4
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2007
Location: New Hampshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
if I get the right buyer, I may even include m/t et streets mounted on stock wheels, a built 4l60e and a bunch of other parts I have... Oh and the nitrous was only used 2-3 times on the dyno only. No street or track use
Trending Topics
08-05-2009, 08:34 PM
#8
Registered User
Join Date: Jul 2009
Posts: 0
Likes: 0
Received 0 Likes
on
0 Posts
Very nice I'm new to this forum. All I have to say, that is one absolutely kick as ride. Do you know what the shipping would be to San Antonio TX? Let me know and we might be able to work something out.
08-07-2009, 05:19 PM
#9
TECH Apprentice
Thread Starter
iTrader: (6)
Join Date: Jan 2007
Location: New Hampshire
Posts: 308
Likes: 0
Received 0 Likes
on
0 Posts
thanks a lot guys. I've put so much time and money into the car, I really hate to see it go but I'm going to sell this car and my audi and buy an escalade ext. Wheels are included, and I also have some et streets i'll throw in, i need it out
08-12-2009, 04:59 AM
#19
Teching In
iTrader: (2)
Join Date: Sep 2007
Location: altoona,p.a
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
still for sale, and does all everything listed in the first post , as well as the built 4l60 e and the extra stuff go with it for that price of 8500?
could you pm me a number to call you at please... VERY interested
could you pm me a number to call you at please... VERY interested
08-13-2009, 06:51 PM
#20
Teching In
Join Date: Feb 2008
Location: Whitesburg,Kentucky
Posts: 25
Likes: 0
Received 0 Likes
on
0 Posts
I have called you several times but i haven't got you. If the car is still for sale i am very interested and would like to come see the car as soon as possible. If you still have it please call 606 634 3561 asap. Thank you