500+RWHP 2000 Camaro SS for sale. must sell!
#1
![Thumbs up](https://ls1tech.com/forums/images/icons/icon14.gif)
Ive finally decided that this time the car has to go. This thing is a animal. Dyno's over 500HP to the wheels and is all MOTOR. 2000 Camaro SS black with peanut leather M6. Just rolled 30,000 on body. The engine has 1800 miles of breaking in. Drivetrain, ect has 2800 miles. This is my baby but other items come first now (ex. House) Here is a list of all mods:
Engine:
**Engine built by TTPerformance**
408 Stroker Iron block
Diamond Piston- completely polydynned to reduce friction with ceramic coating on top of pistons
Diamond Pro Select rings
Callies Crank
Oliver I beam high performance super light weight racing rods ($1200 alone)
All new bearings
Stage 3 Ported 243 heads
Ported by GTP. Flow right under .320
ATI Super Damnper
K-Teck tension pulley
LSX 90MM Intake Manifold (EGR delete)
Nick Williams throttle body
LS6 oil pump
Engery susp. poly. trans mount
Kooks Long tubes (No EGR)
Kooks off road Ypipe
Borla cat back (no plate)
Spec 3 clutch
Billit Steel flywheel
Valvetrain:
Stock rocker arms
2080 intake valves Ferrera
1260 exhaust valves Ferrera
New seats, titanium retainers
New dc springs
42lb Fuel injectors
MSD plug wires
Racetronix complete fuel system
Rear:
Moser 12 bolt rear w/4:11's 33 spline axles
17x9 and 17x11 Chrome ZR1's w/315 drag radials on the back
Also have 17x9 and 18x19 Chrome C5 rims with nitto NT555 at extra cost
Also have 16in firebird rims with ET streets (Not even used yet)
Car has been Dyno Tuned by Matt. Does not idle weird or anything. This is very streetable 500+Hp car.
*** No money was spared on this engine. Matt and George did a great job, everything is super clean and runs 100%***
Suspension:
BMR Kmember
BMR Upper and Lower front control arms
BMR Adjustable Upper control arms
Stock springs up front
Sportline Springs in the rear
BMR adjustable Panhard rod
BMR subframe connectors
BMR adjustable Tourque Arm (trak-pak)
Brand new Bilstein shocks and strust
Misc:
Beautiful Black paint was just detailed
Tan leather seats are in great shape. Absoluty no rips or tears anywhere
Monsoon Stereo w/12 dics cd changer in truck
Radio control on the steering wheel
T-top shades are included
SS logo floor mats
I have reciets for all motor work done to the car.The car made 506hp/480TQ uncorrected through the Moser 12 bolt and 315 drag radials. That dyno was done with the old fuel system and LS6 intake so the hp should be somewhere around 520-530 now.
Im aking $24,000 obo. Please send me a PM. If you needs pics, Please send me your email and I can send you some pics. (610)587-7149 is my cell where I can be reached all the time. Please call if serious.
thanks
kevin
Engine:
**Engine built by TTPerformance**
408 Stroker Iron block
Diamond Piston- completely polydynned to reduce friction with ceramic coating on top of pistons
Diamond Pro Select rings
Callies Crank
Oliver I beam high performance super light weight racing rods ($1200 alone)
All new bearings
Stage 3 Ported 243 heads
Ported by GTP. Flow right under .320
ATI Super Damnper
K-Teck tension pulley
LSX 90MM Intake Manifold (EGR delete)
Nick Williams throttle body
LS6 oil pump
Engery susp. poly. trans mount
Kooks Long tubes (No EGR)
Kooks off road Ypipe
Borla cat back (no plate)
Spec 3 clutch
Billit Steel flywheel
Valvetrain:
Stock rocker arms
2080 intake valves Ferrera
1260 exhaust valves Ferrera
New seats, titanium retainers
New dc springs
42lb Fuel injectors
MSD plug wires
Racetronix complete fuel system
Rear:
Moser 12 bolt rear w/4:11's 33 spline axles
17x9 and 17x11 Chrome ZR1's w/315 drag radials on the back
Also have 17x9 and 18x19 Chrome C5 rims with nitto NT555 at extra cost
Also have 16in firebird rims with ET streets (Not even used yet)
Car has been Dyno Tuned by Matt. Does not idle weird or anything. This is very streetable 500+Hp car.
*** No money was spared on this engine. Matt and George did a great job, everything is super clean and runs 100%***
Suspension:
BMR Kmember
BMR Upper and Lower front control arms
BMR Adjustable Upper control arms
Stock springs up front
Sportline Springs in the rear
BMR adjustable Panhard rod
BMR subframe connectors
BMR adjustable Tourque Arm (trak-pak)
Brand new Bilstein shocks and strust
Misc:
Beautiful Black paint was just detailed
Tan leather seats are in great shape. Absoluty no rips or tears anywhere
Monsoon Stereo w/12 dics cd changer in truck
Radio control on the steering wheel
T-top shades are included
SS logo floor mats
I have reciets for all motor work done to the car.The car made 506hp/480TQ uncorrected through the Moser 12 bolt and 315 drag radials. That dyno was done with the old fuel system and LS6 intake so the hp should be somewhere around 520-530 now.
Im aking $24,000 obo. Please send me a PM. If you needs pics, Please send me your email and I can send you some pics. (610)587-7149 is my cell where I can be reached all the time. Please call if serious.
thanks
kevin
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Originally Posted by TTPMatt
Sad to see you getting rid of the car Kevin. Any details needed, please don't hesitate to PM me for information.
- Matt
- Matt
Trending Topics
#10
#16