FS: Black 2000 Camaro SS 383/4L80E
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Selling my Black 2000 Camaro SS that has 50,000 miles on it. Motor and Trans have less than 5,000 miles on them. The motor is a LS1 383 all bore with L92 heads and L76 intake.
Motor:
LS1 block with 4.100 bore, forged Lunati Rods, forged Wiseco pistons, stock crank
Double Roller Timing chain
LS6 oil pump
LS7 Lifters
TSP Harden Pushrods
Speed Inc. SS3 cam 242/250 .611/.619 114LSA
Crane Dual Valve springs, titanium retainers
L92 heads
L76 intake mani
Holly 90mm throttle body
42# injectors
LS2 fuel rail
QTP 1 7/8 headers off road y pipe, Mufflex 4inch exhaust with single tip dump
160* thermostat
Tranny and drive line:
-2002 GM 4L80E removed from 2500 HD with 32,XXXmi
-Full GM 4L80E rebuild kit, with new clutches, bushings, seals, gaskets, & etc. built by a guy locally who builds transmission for Cadillac
-Yank 3400 4L80e converter that works with stock LS1 flex plate.
-TH400 slip yoke
-Yank Trans cross member with brace mounted TA mount
-Stock 4L80E dipstick tube with 4l60e dipstick cut to length
-Speartech wiring harness
-24,000gvw trans cooler (couple bent fins from installation)
-factory trans lines exctened to fit the 4l80e.
-Autometer trans temp gauge setup
-factory shifter
-4L80E trans mount
-Stock Flexplate
-Speed engineering 4L80E dust cover
Chromoly driveshaft
Moser 9inch with 4.30s, Detriot locker, and 31 spline axles
Chassis and suspension:
Spohn Tubular K member, soild motor mounts
Subframe conectors
Spohn double adjust. Rear LCAs
Spohn adjust. Panhard Bar
Spohn body mount Torque arm Adjust.
Spohn Drag Sway Bar
Lakewood 50/50 drag shocks
V6 springs
Interior:
2000 Ebony interior
stock CD player
Cloth seats, rear seats have been sold and removed. prob can get a rear seat if need be for buyer.
Monster Tach from autometer with shift light on dash but was shorting out so i just need to re wire it.
Car has NO A/C. it has been deleted from it.
Car doesnt have air bags but can be re installed
Other parts:
SLP Fan switch
Summit Stars....15x4 fronts with M/T Sportsman SR fronts 26x6x15
15x8 rears with M/T Street Radials 275/50/16
Asking price is $16,000 OBO. with 50,000 miles on the body and less than 5,000 miles on the new motor and trans set up in the car. Not looking for trades really. thanks!
Motor:
LS1 block with 4.100 bore, forged Lunati Rods, forged Wiseco pistons, stock crank
Double Roller Timing chain
LS6 oil pump
LS7 Lifters
TSP Harden Pushrods
Speed Inc. SS3 cam 242/250 .611/.619 114LSA
Crane Dual Valve springs, titanium retainers
L92 heads
L76 intake mani
Holly 90mm throttle body
42# injectors
LS2 fuel rail
QTP 1 7/8 headers off road y pipe, Mufflex 4inch exhaust with single tip dump
160* thermostat
Tranny and drive line:
-2002 GM 4L80E removed from 2500 HD with 32,XXXmi
-Full GM 4L80E rebuild kit, with new clutches, bushings, seals, gaskets, & etc. built by a guy locally who builds transmission for Cadillac
-Yank 3400 4L80e converter that works with stock LS1 flex plate.
-TH400 slip yoke
-Yank Trans cross member with brace mounted TA mount
-Stock 4L80E dipstick tube with 4l60e dipstick cut to length
-Speartech wiring harness
-24,000gvw trans cooler (couple bent fins from installation)
-factory trans lines exctened to fit the 4l80e.
-Autometer trans temp gauge setup
-factory shifter
-4L80E trans mount
-Stock Flexplate
-Speed engineering 4L80E dust cover
Chromoly driveshaft
Moser 9inch with 4.30s, Detriot locker, and 31 spline axles
Chassis and suspension:
Spohn Tubular K member, soild motor mounts
Subframe conectors
Spohn double adjust. Rear LCAs
Spohn adjust. Panhard Bar
Spohn body mount Torque arm Adjust.
Spohn Drag Sway Bar
Lakewood 50/50 drag shocks
V6 springs
Interior:
2000 Ebony interior
stock CD player
Cloth seats, rear seats have been sold and removed. prob can get a rear seat if need be for buyer.
Monster Tach from autometer with shift light on dash but was shorting out so i just need to re wire it.
Car has NO A/C. it has been deleted from it.
Car doesnt have air bags but can be re installed
Other parts:
SLP Fan switch
Summit Stars....15x4 fronts with M/T Sportsman SR fronts 26x6x15
15x8 rears with M/T Street Radials 275/50/16
Asking price is $16,000 OBO. with 50,000 miles on the body and less than 5,000 miles on the new motor and trans set up in the car. Not looking for trades really. thanks!
Last edited by 00BlackSS; 08-05-2008 at 07:45 PM. Reason: new stuff done
#6
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
this is going to sound crazy but i dont really have that many pics since it was finished, will try to get some asap. i dont own a digital camera haha
no dyno numbers, and i just got the car done in time for the LSX shot out, and while down there was fighting a problem with the car running rich. on the top end car was just falling on its face. car ran a best of 11.8. since then the car has been re tuned but never made it to the track since then. crappy weather put an end to that.
no dyno numbers, and i just got the car done in time for the LSX shot out, and while down there was fighting a problem with the car running rich. on the top end car was just falling on its face. car ran a best of 11.8. since then the car has been re tuned but never made it to the track since then. crappy weather put an end to that.