***2000 Camaro D/R Car For Sale***
03-21-2008, 06:13 AM
#1
FormerVendor
Thread Starter
iTrader: (1)
Join Date: Jul 2003
Posts: 442
Likes: 0
Received 0 Likes
on
0 Posts
***2000 Camaro D/R Car For Sale*** 2000 Camaro drag radial car. This car has all the nice parts. The best run to date is - 8.27 @ 165 with a 1.20 sixty(295 mickys). @ 3190 lbs.
Motor
427 LS7 block built by W2W (filled and o-ringed, 1/2 head studs)
C5R Heads (flowed 395 @ 650)
Callies crank
oliver rods
JE N20 pistons
Wilson sheet metal intake w/ nitrous proflow direct port.
105mm throttle body
custom made headers 2 1/8 stepped to 2 1/4 w/4 inch collector
MSD coils
3 stage dry sump. w/ARE pan
Meizere electric water pump
Afco cross over radiator w/ AN fittings
Driveline
Rossler TH210 w/brake and cooler(4 passes)
Neal Chance billet bolt together converter (4 passes)
Moser 12-bolt 35 spline gun drilles axles with 5/8 studs 3:73 gears.
Driveshaft specialist nitro drive shaft w/1350 yokes
Suspension
PA front lower control arms(chromoly)
PA k-member
Spohn torque arm
Madman offset rear lower control arms
Madman wheelie bars
Madman manual steering rack
Burkhart anti rollbar
Afco double adjustable shocks all 4 corners
Afco front springs
BMR lower rear springs
Stange racing brakes all 4 corners
Body
10-point chromoly S&W cage
Wolfe parachute mount
Stroid parachute
Aluim. racing seat w/5 point harness
VFN Sonoco hood
Percys Speed glass front and rear(hace both stock windows)
Ed Quay rear spoiler
moroso switch panel
Auto meter pro comp gauges
B&M pro ratchet shifter
Weld Alium. stars 15x3.5 front 15x10 rear
Madman motor plate
Quick release steering wheel
This car runs off BS3, the nitrous runs from a Edelbrock progressive controller.
I am sure I am missing something. If you have any questions, PM me
$44,500.00
Motor
427 LS7 block built by W2W (filled and o-ringed, 1/2 head studs)
C5R Heads (flowed 395 @ 650)
Callies crank
oliver rods
JE N20 pistons
Wilson sheet metal intake w/ nitrous proflow direct port.
105mm throttle body
custom made headers 2 1/8 stepped to 2 1/4 w/4 inch collector
MSD coils
3 stage dry sump. w/ARE pan
Meizere electric water pump
Afco cross over radiator w/ AN fittings
Driveline
Rossler TH210 w/brake and cooler(4 passes)
Neal Chance billet bolt together converter (4 passes)
Moser 12-bolt 35 spline gun drilles axles with 5/8 studs 3:73 gears.
Driveshaft specialist nitro drive shaft w/1350 yokes
Suspension
PA front lower control arms(chromoly)
PA k-member
Spohn torque arm
Madman offset rear lower control arms
Madman wheelie bars
Madman manual steering rack
Burkhart anti rollbar
Afco double adjustable shocks all 4 corners
Afco front springs
BMR lower rear springs
Stange racing brakes all 4 corners
Body
10-point chromoly S&W cage
Wolfe parachute mount
Stroid parachute
Aluim. racing seat w/5 point harness
VFN Sonoco hood
Percys Speed glass front and rear(hace both stock windows)
Ed Quay rear spoiler
moroso switch panel
Auto meter pro comp gauges
B&M pro ratchet shifter
Weld Alium. stars 15x3.5 front 15x10 rear
Madman motor plate
Quick release steering wheel
This car runs off BS3, the nitrous runs from a Edelbrock progressive controller.
I am sure I am missing something. If you have any questions, PM me
$44,500.00
Last edited by RPM-24; 03-21-2008 at 06:21 AM.
03-21-2008, 02:07 PM
#7
TECH Fanatic
iTrader: (23)
Join Date: Sep 2005
Location: Joplin,MO
Posts: 1,132
Likes: 0
Received 0 Likes
on
0 Posts
I would try to get a loan for this car but I think I would have a really hard time getting my bank to go for it.. haha BAD *** CAR!!! 
Do you have any more pics though?
Do you have any more pics though?
