1991 300ZX T-tops-LSX Swap
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Im listing this for a buddy of mine. Car is white with black interior. The body on the car is very nice as well as the interior is very clean. He has spent a lot of time and money on the car. This car is a turn key car. Its ready to cruise the streets or head to the strip! Car runs extremely cool and can sit in traffic all day.
2000 model block
Stock bottom end with only 50K miles
Ported 243 heads-Titanium retainers-springs-Ported by Coupe Performance
LS6 intake
Nice size cam-no cam card not 100% sure of the exact specs-around .610 lift
4L60 Tranny-rebuilt less than 1K miles ago
New aftermarket shift kit when tranny was rebuilt
nice street/strip stall-around 3200
Aluminum radiator-electric fan
Long tubes into X-pipe-straight back into 2 mufflers and continued out the back of the car-Car sounds great!!
4.10's in the rear
New pads and rotors all the way around
Upgraded fuel system-255 intank pump-also has an external pump and bigger braided fuel lines
Wet kit on the car with small pills
Car has two sets of wheels-
Street- DriftZ 18x8.5 and 18x10's out back with 285 nitto's
Strip- Centerline Telstars 15x3 1/2 and 15x8's with 28x9 slicks
Car looks sick with the drag set up- There not many 300zx's running around on skinnies!!
Im sure there is more that I did not mention. Feel free to ask any questions and I can answer to the best of my knowledge. I will also list the owners # so anyone interested can talk with him.
Car has full leather interior-power windows and locks, and power steering. There is no A/C on the car. Freshly tinted windows. Car has factory T-Tops that dont leak a drop. Car has been dyno tuned... BEFORE ported heads it made 401 RWHP on the motor. It was tuned a little rich for the nitrous. Has not been back on the dyno with ported heads. Car has great street manners. Again this car is ready to go...all the hard work and money is already done. Hope to have the pics up later tonight!
$13,000 or possible trades call Steven for more info @ 678-228-7754
2000 model block
Stock bottom end with only 50K miles
Ported 243 heads-Titanium retainers-springs-Ported by Coupe Performance
LS6 intake
Nice size cam-no cam card not 100% sure of the exact specs-around .610 lift
4L60 Tranny-rebuilt less than 1K miles ago
New aftermarket shift kit when tranny was rebuilt
nice street/strip stall-around 3200
Aluminum radiator-electric fan
Long tubes into X-pipe-straight back into 2 mufflers and continued out the back of the car-Car sounds great!!
4.10's in the rear
New pads and rotors all the way around
Upgraded fuel system-255 intank pump-also has an external pump and bigger braided fuel lines
Wet kit on the car with small pills
Car has two sets of wheels-
Street- DriftZ 18x8.5 and 18x10's out back with 285 nitto's
Strip- Centerline Telstars 15x3 1/2 and 15x8's with 28x9 slicks
Car looks sick with the drag set up- There not many 300zx's running around on skinnies!!
Im sure there is more that I did not mention. Feel free to ask any questions and I can answer to the best of my knowledge. I will also list the owners # so anyone interested can talk with him.
Car has full leather interior-power windows and locks, and power steering. There is no A/C on the car. Freshly tinted windows. Car has factory T-Tops that dont leak a drop. Car has been dyno tuned... BEFORE ported heads it made 401 RWHP on the motor. It was tuned a little rich for the nitrous. Has not been back on the dyno with ported heads. Car has great street manners. Again this car is ready to go...all the hard work and money is already done. Hope to have the pics up later tonight!
$13,000 or possible trades call Steven for more info @ 678-228-7754
#3
#7
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
are these cars rear wheel or front wheel? I mean Iam new to them. like if I had 500 hp, and hadnt upgraded my rear end, it snaps lol....what about this car? any 1/4 mile numbers? Internals built any?
Trending Topics
#8
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
These cars are rear wheel drive. Car has the Twin Turbo rear. There are a lot of guys running into the 9's on these rears and this one has done very well. Car runs good...when a potentail buyer gets serious the owner will give out his times.
#12
LS1 Tech Administrator
iTrader: (14)
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I was trying to do you a favor. Most people are too lazy to click links. Sadly, many people posting vehicles for sale are too lazy to add photos to the forum in which they're advertising. Let me know if you'd like me to remove the photos.
__________________
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
![](https://ls1tech.com/forums/signaturepics/sigpic210_1.gif)
2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2018 Cadillac Escalade 6.2L A10 Pat G tuned.
LS1,LS2,LS3,LS7,LT1 Custom Camshaft Specialist For custom camshaft help press here.
Custom LSX tuning in person or via email press here.
#14
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Patrick if you look at my last sentence...I thanked you for posting them. So no need to get smart about it.
He's taking anything into consideration...he's just looking for something different. Time for a new project. What do you have?
He's taking anything into consideration...he's just looking for something different. Time for a new project. What do you have?
Last edited by 98m6z; 04-24-2008 at 02:31 PM. Reason: spelling
#15
TECH Enthusiast
iTrader: (42)
Join Date: Mar 2006
Location: Gettysburg, PA
Posts: 725
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
any interest in a truck? I have the truck in my sig. 85K original miles, custom 11" all suspension lift, geared, BBK tb and some other stuff. No rust, swuede/fiberglass interior lightning bucket seats, sterio, lightninng tailgate/handle. forged wheels/PJ tires with good tread. too much to list here, and need pics to really see it but let me know if hes interested.
#18
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Right now i can offer 10,000 cash, wouldnt be able to pick up till next week. Once you pm me hp numbers, 1/4 mile numbers we can talk farther. Pm me #'s. Thanks.