2001 Camaro SS 6Speed w/mods
#1
2001 Camaro SS 6Speed w/mods
$14,000 - Located near Minneapolis, MN (never seen snow)
This is a modded 6speed 2001 Camaro SS with all the SLP options including the floor mats and 17" chrome ZR1 rims. It has around 55,500 miles. I bought the car with the mods that were installed at a shop according to the previous owner. I haven't had any issues at all and the car has a very good tune in it. It made 370rwhp/361rwtq on a mustang dyno. Looking at around 390rwhp/380rwhp cam only on a dynojet. NOT INTERESTED IN TRADES!
Current mods are listed below:
TR224/224 .563/.563 112LSA Cam
Chromoly pushrods
Crane springs
FLP longtube headers and y pipe
GMMG catback
Underdrive pulley
LS1 motorsports lid
PRO 5.0 with Lous Short stick
Lower control arms
Adjustable panhard bar
Relocation brackets
Weld in subframe connectors
Eibach Prokit - lowered 1.5"
http://videos.streetfire.net/video/C...224_163719.htm
http://videos.streetfire.net/video/T...-SS_163827.htm
This is a modded 6speed 2001 Camaro SS with all the SLP options including the floor mats and 17" chrome ZR1 rims. It has around 55,500 miles. I bought the car with the mods that were installed at a shop according to the previous owner. I haven't had any issues at all and the car has a very good tune in it. It made 370rwhp/361rwtq on a mustang dyno. Looking at around 390rwhp/380rwhp cam only on a dynojet. NOT INTERESTED IN TRADES!
Current mods are listed below:
TR224/224 .563/.563 112LSA Cam
Chromoly pushrods
Crane springs
FLP longtube headers and y pipe
GMMG catback
Underdrive pulley
LS1 motorsports lid
PRO 5.0 with Lous Short stick
Lower control arms
Adjustable panhard bar
Relocation brackets
Weld in subframe connectors
Eibach Prokit - lowered 1.5"
http://videos.streetfire.net/video/C...224_163719.htm
http://videos.streetfire.net/video/T...-SS_163827.htm
Last edited by SpeedWorld; 09-11-2008 at 10:07 PM.
Trending Topics
#9
#12
Hehe yeah they are extreme r2's. They are more meant for handling, that's why they are on all 4 corners. They handled amazingly and then I took them off to save them for the rear and the new fronts don't feel as good in the corners. They made a huge difference.