For Sale: '82 S10 Ready for LSx swap!
10-06-2008, 09:13 PM
#1
Launching!
Thread Starter
Join Date: Jan 2005
Location: Birmingham, AL
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
For Sale: '82 S10 Ready for LSx swap! Im posting this for a friend. He is selling this 1982 S-10 pickup that is completely ready for a carbed LSx swap. It will come with everything you will need except the longblock itself. That is ALL you will need to get it 100%.
Here's a list of what it has:
Sanderson shorty headers for LSx S10 swap
Full 2.5" exhaust from headers back w/ x-pipe and Magnaflow mufflers
Turbo 350 w/ full manual reverse & Hughes internals
Hughes flexplate and PTC 10" 4K stall converter
Full fuel sytem w/Holley Blue pump, lines, fittings, reg and 15 Gal fuel cell
Fully built 12 bolt w/ Moser 35 splines, 4.11s, spool and girdle
Victor Jr carb intake
MSD 6010 Ignition box that is already installed and wired (just plug up and go)
Holley 750HP carb
Weld Rodlites (15x4 and 15x10s) w/ 275/60/15 MT Drag Radials
Hurst shifter
Dakota Digital dash/gauge assembly
Autometer Trans Temp, Nitrous Press and 3 3/4 Tach w/ shift light
6-point roll bar (welded in)
Carshop Inc Radiator and electric fans
LSx swap motor mounts
NEW headlamps, taillamps, billet grille, rollpan, fenders and 4" cowl hood
Caltrac traction bars
NEW one piece driveshaft
Competition Engineering Adj shocks (Front and Rear)
ALL PARTS LISTED HAVE LESS THAN 150 MILES ON THEM!!!
Im pretty sure that is it. If I remember anything else I will be sure to post up. The reason he is selling is he found another vehicle that he would rather do a swap with. This thing is READY to go! All you have to do is put the engine in it, plug it up and hook up the fuel lines and you are set!
$6000 OBO
Thanks for looking!
Here's some pics:
Here's a list of what it has:
Sanderson shorty headers for LSx S10 swap
Full 2.5" exhaust from headers back w/ x-pipe and Magnaflow mufflers
Turbo 350 w/ full manual reverse & Hughes internals
Hughes flexplate and PTC 10" 4K stall converter
Full fuel sytem w/Holley Blue pump, lines, fittings, reg and 15 Gal fuel cell
Fully built 12 bolt w/ Moser 35 splines, 4.11s, spool and girdle
Victor Jr carb intake
MSD 6010 Ignition box that is already installed and wired (just plug up and go)
Holley 750HP carb
Weld Rodlites (15x4 and 15x10s) w/ 275/60/15 MT Drag Radials
Hurst shifter
Dakota Digital dash/gauge assembly
Autometer Trans Temp, Nitrous Press and 3 3/4 Tach w/ shift light
6-point roll bar (welded in)
Carshop Inc Radiator and electric fans
LSx swap motor mounts
NEW headlamps, taillamps, billet grille, rollpan, fenders and 4" cowl hood
Caltrac traction bars
NEW one piece driveshaft
Competition Engineering Adj shocks (Front and Rear)
ALL PARTS LISTED HAVE LESS THAN 150 MILES ON THEM!!!
Im pretty sure that is it. If I remember anything else I will be sure to post up. The reason he is selling is he found another vehicle that he would rather do a swap with. This thing is READY to go! All you have to do is put the engine in it, plug it up and hook up the fuel lines and you are set!
$6000 OBO
Thanks for looking!
Here's some pics:
Last edited by 94snake; 10-07-2008 at 10:35 AM.
10-15-2008, 11:37 PM
#4
Teching In
Join Date: Mar 2005
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
I believe the motor may have a broke ring. Plus i found the car i was really wanting to put the motor in i may just put a 5.7 out of an SS Camaro a friend has one i can get. not real sure what i am gonna do though.
Last edited by COPRHED; 10-16-2008 at 07:44 AM.
10-17-2008, 08:11 AM
#7
Launching!
Thread Starter
Join Date: Jan 2005
Location: Birmingham, AL
Posts: 233
Likes: 0
Received 0 Likes
on
0 Posts
