82 Buick Regal w/SBC
10-22-2008, 10:35 PM
#1
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Lee's Summit, Missouri
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
82 Buick Regal w/SBC in Kansas City 1982 Buick Regal (Grand National, T-Type Clone) Burnt Orange with Black trim and T-Type interior and B&M shifter. It has roll cage, 15 gallon fuel cell with Barry Grant fuel pump. New Power window motors. New door and window seal kit just installed. Brand New windshield. Brand new Ram Air Intake Box with Cowl Induction and Window net
Mosier 9 inch Ford rear end with Mosier 31 spline axles 4:11 gears with a Strange spool and disc brakes (front and rear). 3 way adjustable shocks all the way around.
The motor is SBC 350 standard bore with TRW 12:5:1 Domed pistons , 567 lift Solid Roller cam with 1.6 Harlen Sharp roller rockers, Holley 750 Carb, 292 Angle plug heads and Hooker headers,3inch Flowmaster Exhaust all the way out the back with H pipe, ARP bolts, electric water pump and electric fan, MSD ignition and MSD Dist. w/crank trigger. Motor only has 30 miles on new short block and cam. The tranny is a turbo 350 with a shift kit, maual valve body and 5500 stall on the (on tranny brake)and all braided hoses throughout the vehicle (no steel or rubber).
The paint job is new. Brand new centerline wheels 15x8 on rear and 3.5 on front with brand new Mickey Thompson tires all around. 4 inch Fiberglass hood, and Auto meter Gauges and Speedometer.
I am sure that I have missed something here. If you have any questions please feel free to ask.
This will make someone a very nice street or strip car!
Price is $13,500.00 or best reasonable offer (Have way more than that in this vehicle) Have a new vehicle on the way so this one needs to go !
Mosier 9 inch Ford rear end with Mosier 31 spline axles 4:11 gears with a Strange spool and disc brakes (front and rear). 3 way adjustable shocks all the way around.
The motor is SBC 350 standard bore with TRW 12:5:1 Domed pistons , 567 lift Solid Roller cam with 1.6 Harlen Sharp roller rockers, Holley 750 Carb, 292 Angle plug heads and Hooker headers,3inch Flowmaster Exhaust all the way out the back with H pipe, ARP bolts, electric water pump and electric fan, MSD ignition and MSD Dist. w/crank trigger. Motor only has 30 miles on new short block and cam. The tranny is a turbo 350 with a shift kit, maual valve body and 5500 stall on the (on tranny brake)and all braided hoses throughout the vehicle (no steel or rubber).
The paint job is new. Brand new centerline wheels 15x8 on rear and 3.5 on front with brand new Mickey Thompson tires all around. 4 inch Fiberglass hood, and Auto meter Gauges and Speedometer.
I am sure that I have missed something here. If you have any questions please feel free to ask.
This will make someone a very nice street or strip car!
Price is $13,500.00 or best reasonable offer (Have way more than that in this vehicle) Have a new vehicle on the way so this one needs to go !
Last edited by BigJayDee; 10-28-2008 at 11:56 PM.
10-27-2008, 08:50 PM
#4
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Lee's Summit, Missouri
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Not sure yet (it should be a low to mid 12 second) it is a brand new motor and with me trying to sell the car I really dont want to tear anything up.
10-28-2008, 02:41 PM
#5
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Lee's Summit, Missouri
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Will also consider partial trade for a running LQ4 or LQ9 motor with wiring harness and computer
Last edited by BigJayDee; 10-28-2008 at 11:54 PM.
11-11-2008, 01:03 AM
#6
Teching In
Thread Starter
iTrader: (2)
Join Date: Jul 2008
Location: Lee's Summit, Missouri
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Car was just selected to be in the 2009 Malibu Racing.com Calendar
http://maliburacing.com/forum/viewtopic.php?f=2&t=75850
http://maliburacing.com/forum/viewtopic.php?f=2&t=75850
