5.3L Rx7 Project Car
#1
Teching In
Thread Starter
iTrader: (4)
Join Date: Feb 2007
Location: Florida
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
Selling as a Package Deal: Black 1988 SE, 5.3L/T56, and what I believe is an 87 Blue base model
The black car has:
8 point roll cage from Chassis engineering
Racequip 5 point harness
Black Corbeau Race seat
Poly Urethane bushings (rear control arm bushings are not in, but I do have them)
Racing beat springs
5 Lug swap
RX7 3rd Gen wheels (painted black)
Potenza Re-11 tires (225/50R16)
Lsd differential
Short shifter
Racing beat under drive pulley
Atkins rotary Thermal Oil pellet
Racing beat header
Custom Cold air intake
WalBro intake fuel pump
Electric Fan
Optima battery
Steel braided Brake lines
Steel braided clutch line
AutoMeter Oil pressure gauge
AutoMeter Coolant tem gauge
Fuel pressure gauge in the engine bay
New fuel filter
New plugs and plug wires
The car currently has the original rotary motor in it and runs. It needs a passenger fender and a paint job. The interior is out of the entire car. Also needs brakes. All emissions have been removed as well as A/c and Heat.
The second car: A blue 87 base model..It is a complete car that has some body damage but has a bunch of usuable parts for the black one including an aluminum hood and interior.
The motor/tranny setup is a 5.3L engine and T56 tranny that i was going to use for the project. The engine comes with a brand new Melling ported and Shimmed LS1 oil pump and a Ls1 intake manifold.
Asking $3500 for everything...cash and no trades please..Let me know if you have any questions..you can contact me at 239 313 0978, ask for Darrel
The black car has:
8 point roll cage from Chassis engineering
Racequip 5 point harness
Black Corbeau Race seat
Poly Urethane bushings (rear control arm bushings are not in, but I do have them)
Racing beat springs
5 Lug swap
RX7 3rd Gen wheels (painted black)
Potenza Re-11 tires (225/50R16)
Lsd differential
Short shifter
Racing beat under drive pulley
Atkins rotary Thermal Oil pellet
Racing beat header
Custom Cold air intake
WalBro intake fuel pump
Electric Fan
Optima battery
Steel braided Brake lines
Steel braided clutch line
AutoMeter Oil pressure gauge
AutoMeter Coolant tem gauge
Fuel pressure gauge in the engine bay
New fuel filter
New plugs and plug wires
The car currently has the original rotary motor in it and runs. It needs a passenger fender and a paint job. The interior is out of the entire car. Also needs brakes. All emissions have been removed as well as A/c and Heat.
The second car: A blue 87 base model..It is a complete car that has some body damage but has a bunch of usuable parts for the black one including an aluminum hood and interior.
The motor/tranny setup is a 5.3L engine and T56 tranny that i was going to use for the project. The engine comes with a brand new Melling ported and Shimmed LS1 oil pump and a Ls1 intake manifold.
Asking $3500 for everything...cash and no trades please..Let me know if you have any questions..you can contact me at 239 313 0978, ask for Darrel
Last edited by envious; 10-01-2009 at 10:56 PM.