94 Z28 LT1 roll cage, nitrous, th-350 $4500
#1
On The Tree
Thread Starter
Join Date: Aug 2006
Location: okc, ok
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
1994 Z28 Camaro 12.27@112mph
*** WILL TRADE FOR HARLEY!!!!***
$4500 OBO
* custom bent 6pt roll cage by mickeys chassis works. metal was sanded down and painted with clear coat only.
*NOS super power shot (150 hp) i have plate that i can include to make a traditional wet kit. (plate installs behind throttle body)
*th350 trans. ptc 3k stall. (factory cam so no need to giant stall) aftermarket tranny cooler with -an fittings on the cooler and on the tranny. all new 3/8" hardlines ran for tranny. custom round tube crossmember with torque arm mount. B&M quicksilver shifter mounted inside factory console. bluementhals 3" steel drive shaft wtih 1350 u-joints.
*bmr boxed sub frame connectors. welded at the front and bolted in the rear.
*glasstek 4" cowl hood. shift light mounted inside of cowl.
*pacesetter long tube headers. y-pipe. into 3" dynomax bullet dumped.
*two factory front seats cut for 5pt harnesses.
*pw, pl, ps, a/c, heat, all there. i was drag racing this car. but still perfectly capable of being driven ANYWHERE.
* paint on front bumper has started "spidering" couple small hail dings on rear quarters
* i will include the 15X8 centerline telstars with the car if i get a reasonable offer.
i do have all rear seats and all seat belts to go with the car. as well as factory z-28 exhaust with tips, and 2-16" firebird wheels with et-streets mounted on them.
im sure i have left something out of this posting so please dont hesitate to call and ask questions!!
405-596-0876-cory
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000896.jpg)
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000906.jpg)
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000944.jpg)
*** WILL TRADE FOR HARLEY!!!!***
$4500 OBO
* custom bent 6pt roll cage by mickeys chassis works. metal was sanded down and painted with clear coat only.
*NOS super power shot (150 hp) i have plate that i can include to make a traditional wet kit. (plate installs behind throttle body)
*th350 trans. ptc 3k stall. (factory cam so no need to giant stall) aftermarket tranny cooler with -an fittings on the cooler and on the tranny. all new 3/8" hardlines ran for tranny. custom round tube crossmember with torque arm mount. B&M quicksilver shifter mounted inside factory console. bluementhals 3" steel drive shaft wtih 1350 u-joints.
*bmr boxed sub frame connectors. welded at the front and bolted in the rear.
*glasstek 4" cowl hood. shift light mounted inside of cowl.
*pacesetter long tube headers. y-pipe. into 3" dynomax bullet dumped.
*two factory front seats cut for 5pt harnesses.
*pw, pl, ps, a/c, heat, all there. i was drag racing this car. but still perfectly capable of being driven ANYWHERE.
* paint on front bumper has started "spidering" couple small hail dings on rear quarters
* i will include the 15X8 centerline telstars with the car if i get a reasonable offer.
i do have all rear seats and all seat belts to go with the car. as well as factory z-28 exhaust with tips, and 2-16" firebird wheels with et-streets mounted on them.
im sure i have left something out of this posting so please dont hesitate to call and ask questions!!
405-596-0876-cory
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000896.jpg)
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000906.jpg)
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000944.jpg)
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000934.jpg)
#3
On The Tree
Thread Starter
Join Date: Aug 2006
Location: okc, ok
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
no sir. factory 3:23 gear rear-end.
engine is 100% stock. just the LT's, spray, and th-350
couple more pictars.......
just a better pic showing where the seats were cut for the harnesses
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000903.jpg)
the front bumper as mentioned in first post
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000949.jpg)
rear seat deletes
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000955.jpg)
pic of engine bay
engine is 100% stock. just the LT's, spray, and th-350
couple more pictars.......
just a better pic showing where the seats were cut for the harnesses
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000903.jpg)
the front bumper as mentioned in first post
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000949.jpg)
rear seat deletes
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000955.jpg)
pic of engine bay
![](http://i164.photobucket.com/albums/u1/cory_tanner/P1000959.jpg)
#6
On The Tree
Thread Starter
Join Date: Aug 2006
Location: okc, ok
Posts: 150
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
local guy here traded me my burnt up 4l60E for the seat work. i love the seats....got to keep the factory electric seat and have my 5pt harness!!! bump for STEVE OWEN!!!
i might trade for the right street bike..... but you are in md....you would have to deliver and pick up my friend.... lol
i might trade for the right street bike..... but you are in md....you would have to deliver and pick up my friend.... lol