95 Z-28 Bbc 454 F/S
04-27-2007, 02:12 PM
#1
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Jan 2006
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
95 Z-28 Bbc 454 F/S I don't have as much time to mess with the car anymore. I've gotten a new job and just don't get to spend as much time working on it anymore. I'd love to finish it and drive it for a few months and then sell it but it will be alot easier to just sell now.
Its my 95 BBC project camaro.
https://ls1tech.com/forums/small-block-big-block-chevy-specific/618839-bbc-sbc-conversion-how.html pic's of build up
454 BBC 650 hhp
Eagle Forged Rotating Assembly
Crower Roller Cam
Crower Roller Lifters
Harlan Sharp 1:8 ratio roller lifters
Edelbrock Victor Jr. Intake (high rise)
Holley Double Pumper 850 cfm.
Griffin Radiator
Hooker Header 3" x-pipe Bullet mufflers and turn downs
Built 700R4 tranny with 3500 rpm stall converter.
BMR K-member
BMR welded in subframe connectors
BMR Adj. LCA's
BMR Adj. Panhard Bar
Jegster Shortened Torque Arm. Wanted the Tq Arm off the tranny.
MSD 6Al Ignition
B&M shifter
AutoMeter Gauges Speedo, Tach, Oil pressure, Water Temp, Volts, and Fuel
Moser 9" rear end narrowed 3" per side with 4:11 ratio Motive gear
15x10 4.5 Backspacing SportStars with 325/50R/15 MT Drag Radials
15x4 SportStars with MT Sportsman Fronts
https://ls1tech.com/forums/drag-racing-tech/657441-325-50r-15-w-15x10-streetstars.html photos of tires
The car itself has
Leather seats perfect condition
cassete player with bose system
4" cowl hood
power windows and locks
I'm sure there are a few things I'm leaving out that I can't remember right off hand. All that needs to be done is finish hooking the tranny cooler up, driveshaft, brake lines and replace the windsheild, place front nose back on along with hood, and place all interior pieces back in place. I've got over $14,000 in this car and will be willing to let it go for $10,000. I know you can buy a Z-28 for a few thousand less but you can't buy a car, the parts (alot of them), engine, tranny, rear end and put it together for any less than $14-16,000 if your lucky. Serious Iquires only. I don't have time to mess with people who don't have the money or desire to have this car. That may seem harsh but this isn't your run of the mill Camaro from a car lot. I don't get to check my pm' or email as much now that I have a new job. So if your really interesed you can call me at 704-730-0692. I live in the eastern time zone so no calls after 10 pm eastern time. I'm never at home until after 6:30pm in the evening either. On the weekends I'm available some on Saturday but I'm not at home all day Sunday until about 8:00 pm.
Thanks
Its my 95 BBC project camaro.
https://ls1tech.com/forums/small-block-big-block-chevy-specific/618839-bbc-sbc-conversion-how.html pic's of build up
454 BBC 650 hhp
Eagle Forged Rotating Assembly
Crower Roller Cam
Crower Roller Lifters
Harlan Sharp 1:8 ratio roller lifters
Edelbrock Victor Jr. Intake (high rise)
Holley Double Pumper 850 cfm.
Griffin Radiator
Hooker Header 3" x-pipe Bullet mufflers and turn downs
Built 700R4 tranny with 3500 rpm stall converter.
BMR K-member
BMR welded in subframe connectors
BMR Adj. LCA's
BMR Adj. Panhard Bar
Jegster Shortened Torque Arm. Wanted the Tq Arm off the tranny.
MSD 6Al Ignition
B&M shifter
AutoMeter Gauges Speedo, Tach, Oil pressure, Water Temp, Volts, and Fuel
Moser 9" rear end narrowed 3" per side with 4:11 ratio Motive gear
15x10 4.5 Backspacing SportStars with 325/50R/15 MT Drag Radials
15x4 SportStars with MT Sportsman Fronts
https://ls1tech.com/forums/drag-racing-tech/657441-325-50r-15-w-15x10-streetstars.html photos of tires
The car itself has
Leather seats perfect condition
cassete player with bose system
4" cowl hood
power windows and locks
I'm sure there are a few things I'm leaving out that I can't remember right off hand. All that needs to be done is finish hooking the tranny cooler up, driveshaft, brake lines and replace the windsheild, place front nose back on along with hood, and place all interior pieces back in place. I've got over $14,000 in this car and will be willing to let it go for $10,000. I know you can buy a Z-28 for a few thousand less but you can't buy a car, the parts (alot of them), engine, tranny, rear end and put it together for any less than $14-16,000 if your lucky. Serious Iquires only. I don't have time to mess with people who don't have the money or desire to have this car. That may seem harsh but this isn't your run of the mill Camaro from a car lot. I don't get to check my pm' or email as much now that I have a new job. So if your really interesed you can call me at 704-730-0692. I live in the eastern time zone so no calls after 10 pm eastern time. I'm never at home until after 6:30pm in the evening either. On the weekends I'm available some on Saturday but I'm not at home all day Sunday until about 8:00 pm.
Thanks
Last edited by cwaldt; 07-11-2007 at 10:38 AM.
05-08-2007, 05:29 PM
#6
TECH Regular
Thread Starter
iTrader: (4)
Join Date: Jan 2006
Posts: 428
Likes: 0
Received 0 Likes
on
0 Posts
TTT for the day. I'd really like to sell in the next week of so. If not I'm just going to start back making time to finish it and drive it a little while. If your interested now's your time to let me know. A few offers but nothing done as of yet.
