1971 Chevelle f/s big block 12 bolt bucket seats disc brakes street or strip
10-02-2007, 07:16 PM
#1
Teching In
Thread Starter
Join Date: Mar 2007
Location: The boondocks, Missouri
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
1971 Chevelle f/s big block 12 bolt bucket seats disc brakes street or strip 396 big block engine, bored .060 to 408 cubes
Speed Pro forged pistons
GM forged crank
ARP chromeoly rod and main bolts
Melling oil pump
Clevite 77/Federal Mogul bearings
GM oval port heads
2.06/1.72 valves
Comp .574/.578 lift cam
Summit Chromeoly push rods
GM guide plates
Cloyes double roller timing chain
Edelbrock Performer RPM intake
Holley 750 street HP carb
Mallory high energy ignition distributor
Taylor 8 mm spark plug wires
Flex-a-lite electric fan w/ auto on-off thermo-sensor
Heavy duty 4 core radiator
Summit long tube headers
Powermaster mini starter
High output 94 amp alternator
Dual 2.5 inch mandrel bent exhaust pipes w/ h pipe
Dynomax Ultraflow race mufflers
TH350 automatic transmission
Hughes 3000 rpm stall converter
Trans Go stage 2 shift kit
12 bolt rear end w/positive traction
4.10 gears
Strange differential cover
UMI rear tubular control arms
Power steering
Grant steering wheel
Factory bucket seats
Hurst Quarterstick race shifter
Autometer gauges
Biondo line lock
Power front disc brakes
New rear brake cylinders and drums
Monroe shocks
Suspension Techniques heavy duty front AND rear sway bars
Weld wheels (15X10 rear, 15X7 front)
BF Goodrich radial tires (rear) and Continental radial tires (front)
New black interior
AC/Heater delete
SS hood
SS grille
This car has enough torque to plant you in the seat when the accelerator is pressed even at 50 mph. Looks good, sounds awesome.
Most parts listed are either new or fairly new. The engine has less than 500 miles on it.
Body is mostly straight, floor boards and trunk pan are original and are solid. Paint is 3 years old, not show quality but still shiny. Gets attention everywhere it goes.
The transmission shifts good and firm, but not harsh. Car stops well and is very easy to maneuver for a big block car.
This car is an original bucket seat/console car that came with heat and a/c. I don't have the console or the HVAC system for it but these can be bought on ebay and Ausleys Chevelle parts (located in in Graham, NC) and re added.
I do have a clear NC title and build sheet to go with the car. I also have a list of most of the parts used to build this car, along with receipts.
Car is an original NC car and was sold new at an existing dealership in Fayetteville NC.
This car has been a 3 year project of mine, built by myself and the help of a few others. This car is not perfect by any means but it is turn key ready to drive.
I've seen Chevelles like mine with 350 small blocks sell for more than my asking price, so whoever buys this is getting a good deal.
NO JOY RIDERS!!! DON'T WASTE MY TIME OR YOURS! Only serious inquiries.
No trades. No checks. Cash only. PM me for more info
Speed Pro forged pistons
GM forged crank
ARP chromeoly rod and main bolts
Melling oil pump
Clevite 77/Federal Mogul bearings
GM oval port heads
2.06/1.72 valves
Comp .574/.578 lift cam
Summit Chromeoly push rods
GM guide plates
Cloyes double roller timing chain
Edelbrock Performer RPM intake
Holley 750 street HP carb
Mallory high energy ignition distributor
Taylor 8 mm spark plug wires
Flex-a-lite electric fan w/ auto on-off thermo-sensor
Heavy duty 4 core radiator
Summit long tube headers
Powermaster mini starter
High output 94 amp alternator
Dual 2.5 inch mandrel bent exhaust pipes w/ h pipe
Dynomax Ultraflow race mufflers
TH350 automatic transmission
Hughes 3000 rpm stall converter
Trans Go stage 2 shift kit
12 bolt rear end w/positive traction
4.10 gears
Strange differential cover
UMI rear tubular control arms
Power steering
Grant steering wheel
Factory bucket seats
Hurst Quarterstick race shifter
Autometer gauges
Biondo line lock
Power front disc brakes
New rear brake cylinders and drums
Monroe shocks
Suspension Techniques heavy duty front AND rear sway bars
Weld wheels (15X10 rear, 15X7 front)
BF Goodrich radial tires (rear) and Continental radial tires (front)
New black interior
AC/Heater delete
SS hood
SS grille
This car has enough torque to plant you in the seat when the accelerator is pressed even at 50 mph. Looks good, sounds awesome.
Most parts listed are either new or fairly new. The engine has less than 500 miles on it.
Body is mostly straight, floor boards and trunk pan are original and are solid. Paint is 3 years old, not show quality but still shiny. Gets attention everywhere it goes.
The transmission shifts good and firm, but not harsh. Car stops well and is very easy to maneuver for a big block car.
This car is an original bucket seat/console car that came with heat and a/c. I don't have the console or the HVAC system for it but these can be bought on ebay and Ausleys Chevelle parts (located in in Graham, NC) and re added.
I do have a clear NC title and build sheet to go with the car. I also have a list of most of the parts used to build this car, along with receipts.
Car is an original NC car and was sold new at an existing dealership in Fayetteville NC.
This car has been a 3 year project of mine, built by myself and the help of a few others. This car is not perfect by any means but it is turn key ready to drive.
I've seen Chevelles like mine with 350 small blocks sell for more than my asking price, so whoever buys this is getting a good deal.
NO JOY RIDERS!!! DON'T WASTE MY TIME OR YOURS! Only serious inquiries.
No trades. No checks. Cash only. PM me for more info
Last edited by 69Nova355; 12-16-2007 at 09:04 AM.
10-03-2007, 08:12 PM
#4
Teching In
Thread Starter
Join Date: Mar 2007
Location: The boondocks, Missouri
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Thanks for the comments.
Also this (to my knowledge) has always been an NC car.
The only reason I'm selling is to buy another car I found that I want BAD.
Also this (to my knowledge) has always been an NC car.
The only reason I'm selling is to buy another car I found that I want BAD.
Trending Topics
11-13-2007, 07:03 AM
#13
Teching In
Thread Starter
Join Date: Mar 2007
Location: The boondocks, Missouri
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
11-13-2007, 03:56 PM
#15
Teching In
Thread Starter
Join Date: Mar 2007
Location: The boondocks, Missouri
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
I did....that was a long time ago....and no one wanted to trade anything that I felt was worth it....
And it was also before I decided to be different and instead go for something that not many have....
CAN YOU SAY "TURBO"?
So yeah, now I need some garage space for the new turbo car, otherwise I'd keep the Chevelle.
And it was also before I decided to be different and instead go for something that not many have....
CAN YOU SAY "TURBO"?
So yeah, now I need some garage space for the new turbo car, otherwise I'd keep the Chevelle.
12-06-2007, 08:19 AM
#16
Teching In
Thread Starter
Join Date: Mar 2007
Location: The boondocks, Missouri
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts
Well I'm going to be moving 1100 miles in a few months and don't want to take it with me. First $9000 at my door takes it home. This is a sweet deal.
12-12-2007, 01:22 PM
#18
Teching In
Thread Starter
Join Date: Mar 2007
Location: The boondocks, Missouri
Posts: 32
Likes: 0
Received 0 Likes
on
0 Posts