89 Mustang-Built 351-TKO 600
07-03-2008, 04:00 PM
#4
Teching In
Thread Starter
Join Date: Jul 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
I dont have any good dyno #'s. The only time i had it dynoed it only pulled to 5750 and started doing what we thought was floating the valve's. A couple months after that my msd went completely out and i exchanged it and now it will run as high as you want it to. The cam is good for power to 6800. I've been to the track twice since build, It runs high 11's @ 118 mph on motor. I've never run it with nitrous. With the grind i have it should respond well to the juice.
07-04-2008, 05:05 PM
#5
Teching In
Thread Starter
Join Date: Jul 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Bump!!! Show me some trades. Doesnt have to be a muscle car, i will entertain offers for a DD or partial trades. Lets deal. This is one of the cleanest foxbody's around that is built to handle whatever you throw at it.
07-05-2008, 05:52 PM
#7
Teching In
Thread Starter
Join Date: Jul 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
07-05-2008, 07:00 PM
#10
Teching In
Thread Starter
Join Date: Jul 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
07-05-2008, 07:03 PM
#11
Teching In
Thread Starter
Join Date: Jul 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
5 speed. They call it the 600 because it's rated to handle 600 lbs tq. Ported Trick Flow heads and the block is a 79 that i had machined to a one piece RMS. I'm open to any trade. Give me some info on the Nova. I actually owned a 72 nova 4 speed before i got into mustangs 3 years ago.
07-05-2008, 08:30 PM
#12
Teching In
Join Date: May 2008
Posts: 38
Likes: 0
Received 0 Likes
on
0 Posts
5 speed. They call it the 600 because it's rated to handle 600 lbs tq. Ported Trick Flow heads and the block is a 79 that i had machined to a one piece RMS. I'm open to any trade. Give me some info on the Nova. I actually owned a 72 nova 4 speed before i got into mustangs 3 years ago.
07-05-2008, 09:47 PM
#13
Teching In
Thread Starter
Join Date: Jul 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
The t-5 was rated at 300 lbs tq and most i've seen hold together way past that. The TKO is a very stout tranny and cost a pretty penny. I dont have nitrous lines. I do have a bottle, bottle heater, and line fuel line run from the second fuel pump up to the engine bay, i have two holley regulators, fuel psi gauge and nitrous gauge. Everything is wired, the wires are laying under the vic jr. No electric choke, no choke at all. You can find the Holley HP 750's on line and read up on them. They run $670 new at summit. I'll check your pics out and let you know something.
07-07-2008, 06:59 AM
#14
Teching In
Thread Starter
Join Date: Jul 2008
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Monday morning Bump. Will consider a nice DD along with the other trades i mentioned as well. I'm bored and ready for another car. This happens every couple of years. I always regret it but then find another to take me mind off my lost. You will have one of the cleanest fox's around and wont be dissapointed.
