WTT: 1990 Corvette for LS car
#1
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I have a 1990 Corvette with a 4-bolt main motor (10k on the motor) I'm wanting to trade for a LS Camaro/Firebird/Corvette.
I have long tubes/4.11 gears and more on the car, plus pull component/amplified sound system with a 10-disk changer and sub/amp.
Also have heads/cam/intake and other performance goodies NOT yet installed on the car.
I also will add cash. Depends on the quality and kind of car willing to be traded.
I don't want to type everything out...so I can go into everything in has on it and much more detail, but I would like to see if there's any interest in it before I do.
So....anyone interested?
I have long tubes/4.11 gears and more on the car, plus pull component/amplified sound system with a 10-disk changer and sub/amp.
Also have heads/cam/intake and other performance goodies NOT yet installed on the car.
I also will add cash. Depends on the quality and kind of car willing to be traded.
I don't want to type everything out...so I can go into everything in has on it and much more detail, but I would like to see if there's any interest in it before I do.
So....anyone interested?
#2
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
As far as some more info...
Here's some pictures:
![](http://inlinethumb29.webshots.com/40924/2556587180053301097S600x600Q85.jpg)
![](http://inlinethumb35.webshots.com/2786/1207272796053301097S600x600Q85.jpg)
Performance:
Installed on Car:
-Jasper 350 block bored .050 over w/ 4-bolt mains hypertenuic pistons (10k on motor)
-Ported intake
-K&N filter
-Scorpion 1.6 roller rockers (self-aligning)
-Richmond 4.11 gears (Dana 44 ring, Dana 60 pinion)
-Flowmaster mufflers
-Hooker long tube headers
-180* thermostat
Yet to be Installed:
-AFR 190v heads (have a 900 dollar bill for new springs, retianers, valves and porting). Never installed since freshened up. Flows 280cfm on intake.
-Crane 109831 cam
-Cloyes double roller timing chain
-Scorpion 1.6 non-self-aligning roller rockers
-Lingenfelter Superram with Accel base
-Felpro 1010 head gaskets and 1205 intake gaskets
-Bosch Design III 30lb injectors
-LS7 lifters
Stereo:
-DEI Viper 550.2 component fronts
-eDesign audio 6000v.1 component rears
-eDesign audio 11kv.2 sub
-eDesign audio nine.2 sub amp (400w)
-eDesign audio nine.4 speaker amp (65Wx4)
-eDesign audio 4ga power and ground
Exterior:
-Stripe was professionally painted. The pinstripes to the left and the right of the main stripe are also PAINTED, not decals. The CORVETTE decals were added then clear coated over.
-Rear window tinted 5%
-Windshield has a crack on the passenger side....however I do have an extra windshield that I never got around to replacing.
-American Racing LeMans wheels (FORGED! but discontinued)
-BRAND NEW Goodyear Eagle F1 GS-D3 tires 275/40/17 all the way around. As you know, these tires are 200 a piece!
The bad:
-A/C doesn't work. Compressor works, so should just need a charge, but it was never a DD and I never used it, so I never charged it to make sure thats all it was.
-Occassionally speedometer and the center digital display doesn't work. Caused by a faulty ground...again, haven't gotten around to fixing it.
-Seats have some tears. Biggest one is about 3 inches where the seam split by the side bolster.
-Hood has a small crack where it closed with a screwdriver on the intake![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
-Generally, its in good shape, but the body shows its age, and the clear top has the usual splintering common to these cars. Doesn't leak though.
Anything else let me know
Here's some pictures:
![](http://inlinethumb29.webshots.com/40924/2556587180053301097S600x600Q85.jpg)
![](http://inlinethumb35.webshots.com/2786/1207272796053301097S600x600Q85.jpg)
Performance:
Installed on Car:
-Jasper 350 block bored .050 over w/ 4-bolt mains hypertenuic pistons (10k on motor)
-Ported intake
-K&N filter
-Scorpion 1.6 roller rockers (self-aligning)
-Richmond 4.11 gears (Dana 44 ring, Dana 60 pinion)
-Flowmaster mufflers
-Hooker long tube headers
-180* thermostat
Yet to be Installed:
-AFR 190v heads (have a 900 dollar bill for new springs, retianers, valves and porting). Never installed since freshened up. Flows 280cfm on intake.
-Crane 109831 cam
-Cloyes double roller timing chain
-Scorpion 1.6 non-self-aligning roller rockers
-Lingenfelter Superram with Accel base
-Felpro 1010 head gaskets and 1205 intake gaskets
-Bosch Design III 30lb injectors
-LS7 lifters
Stereo:
-DEI Viper 550.2 component fronts
-eDesign audio 6000v.1 component rears
-eDesign audio 11kv.2 sub
-eDesign audio nine.2 sub amp (400w)
-eDesign audio nine.4 speaker amp (65Wx4)
-eDesign audio 4ga power and ground
Exterior:
-Stripe was professionally painted. The pinstripes to the left and the right of the main stripe are also PAINTED, not decals. The CORVETTE decals were added then clear coated over.
-Rear window tinted 5%
-Windshield has a crack on the passenger side....however I do have an extra windshield that I never got around to replacing.
-American Racing LeMans wheels (FORGED! but discontinued)
-BRAND NEW Goodyear Eagle F1 GS-D3 tires 275/40/17 all the way around. As you know, these tires are 200 a piece!
The bad:
-A/C doesn't work. Compressor works, so should just need a charge, but it was never a DD and I never used it, so I never charged it to make sure thats all it was.
-Occassionally speedometer and the center digital display doesn't work. Caused by a faulty ground...again, haven't gotten around to fixing it.
-Seats have some tears. Biggest one is about 3 inches where the seam split by the side bolster.
-Hood has a small crack where it closed with a screwdriver on the intake
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
![Bang Head](https://ls1tech.com/forums/images/smilies/LS1Tech/gr_banghead.gif)
-Generally, its in good shape, but the body shows its age, and the clear top has the usual splintering common to these cars. Doesn't leak though.
Anything else let me know
#5
Staging Lane
Join Date: Nov 2006
Location: Clinton Twp. , MICHIGAN
Posts: 84
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I might be intersted pending what kinda cash we are talking with your car. Is yours an auto or stick? email me if your intersted @ dwf1019@yahoo.com .... i'm in Michigan about 30 mins north of Detroit.
thanks dan
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/992283-make-offer-2000-z28-modded.html
thanks dan
https://ls1tech.com/forums/vehicles-sale-lsx-powered-only/992283-make-offer-2000-z28-modded.html
Trending Topics
#11