Just made 573whp&526trq N/A! Very Pleased! L(o)(o)K
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: On top of your MOM!
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Just made 573whp&526trq N/A! Very Pleased! L(o)(o)K
Z06 just off a Dyno late night tuning session at Fresno Performance!
573whp/526trq N/A
A VERY Special THANKS to Nate and Fresno Performance for the Mad Scientist tuning skillz!!!
06 Z06 8850 miles and I ripped it apart and installed some goodies!
These #'s are with a 99% stock longblock only did the below mods! I decided not to change the heads and I'm damn glad it did and VERY IMPRESSED with the results
Custom Comp Cams bumpstick, dual springs&Ti retainers, pushrods, Kooks Stainless 1 7/8" Headers with matching 3" X-pipe, Borla Catback, K&N FIPK, and I ported the T-body to get a HEAT SOAKED 573whp and 526trq at 11.8 AFR so we could get more from it but I'm SUPER HAPPY!!!!
I'm betting if we did some pulls on a cool engine it will do 590+ all on 91* octane pump swill and N/A
AGAIN thanks to Nathan and Fresno Performance for the tune!!!!! GREAT JOB on the tuning!!!!!
573whp/526trq N/A
A VERY Special THANKS to Nate and Fresno Performance for the Mad Scientist tuning skillz!!!
06 Z06 8850 miles and I ripped it apart and installed some goodies!
These #'s are with a 99% stock longblock only did the below mods! I decided not to change the heads and I'm damn glad it did and VERY IMPRESSED with the results
Custom Comp Cams bumpstick, dual springs&Ti retainers, pushrods, Kooks Stainless 1 7/8" Headers with matching 3" X-pipe, Borla Catback, K&N FIPK, and I ported the T-body to get a HEAT SOAKED 573whp and 526trq at 11.8 AFR so we could get more from it but I'm SUPER HAPPY!!!!
I'm betting if we did some pulls on a cool engine it will do 590+ all on 91* octane pump swill and N/A
AGAIN thanks to Nathan and Fresno Performance for the tune!!!!! GREAT JOB on the tuning!!!!!
#6
Z06 just off a Dyno late night tuning session at Fresno Performance!
573whp/526trq N/A
A VERY Special THANKS to Nate and Fresno Performance for the Mad Scientist tuning skillz!!!
06 Z06 8850 miles and I ripped it apart and installed some goodies!
These #'s are with a 99% stock longblock only did the below mods! I decided not to change the heads and I'm damn glad it did and VERY IMPRESSED with the results
Custom Comp Cams bumpstick, dual springs&Ti retainers, pushrods, Kooks Stainless 1 7/8" Headers with matching 3" X-pipe, Borla Catback, K&N FIPK, and I ported the T-body to get a HEAT SOAKED 573whp and 526trq at 11.8 AFR so we could get more from it but I'm SUPER HAPPY!!!!
I'm betting if we did some pulls on a cool engine it will do 590+ all on 91* octane pump swill and N/A
AGAIN thanks to Nathan and Fresno Performance for the tune!!!!! GREAT JOB on the tuning!!!!!
573whp/526trq N/A
A VERY Special THANKS to Nate and Fresno Performance for the Mad Scientist tuning skillz!!!
06 Z06 8850 miles and I ripped it apart and installed some goodies!
These #'s are with a 99% stock longblock only did the below mods! I decided not to change the heads and I'm damn glad it did and VERY IMPRESSED with the results
Custom Comp Cams bumpstick, dual springs&Ti retainers, pushrods, Kooks Stainless 1 7/8" Headers with matching 3" X-pipe, Borla Catback, K&N FIPK, and I ported the T-body to get a HEAT SOAKED 573whp and 526trq at 11.8 AFR so we could get more from it but I'm SUPER HAPPY!!!!
I'm betting if we did some pulls on a cool engine it will do 590+ all on 91* octane pump swill and N/A
AGAIN thanks to Nathan and Fresno Performance for the tune!!!!! GREAT JOB on the tuning!!!!!