Just made 573whp&526trq N/A! Very Pleased! L(o)(o)K
12-10-2008, 10:10 PM
#1
Launching!
Thread Starter
iTrader: (1)
Join Date: Aug 2005
Location: On top of your MOM!
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Just made 573whp&526trq N/A! Very Pleased! L(o)(o)K Z06 just off a Dyno late night tuning session at Fresno Performance!
573whp/526trq N/A
A VERY Special THANKS to Nate and Fresno Performance for the Mad Scientist tuning skillz!!!
06 Z06 8850 miles and I ripped it apart and installed some goodies!
These #'s are with a 99% stock longblock only did the below mods! I decided not to change the heads and I'm damn glad it did and VERY IMPRESSED with the results
Custom Comp Cams bumpstick, dual springs&Ti retainers, pushrods, Kooks Stainless 1 7/8" Headers with matching 3" X-pipe, Borla Catback, K&N FIPK, and I ported the T-body to get a HEAT SOAKED 573whp and 526trq at 11.8 AFR so we could get more from it but I'm SUPER HAPPY!!!!
I'm betting if we did some pulls on a cool engine it will do 590+ all on 91* octane pump swill and N/A
AGAIN thanks to Nathan and Fresno Performance for the tune!!!!!
GREAT JOB on the tuning!!!!!
573whp/526trq N/A
A VERY Special THANKS to Nate and Fresno Performance for the Mad Scientist tuning skillz!!!
06 Z06 8850 miles and I ripped it apart and installed some goodies!
These #'s are with a 99% stock longblock only did the below mods! I decided not to change the heads and I'm damn glad it did and VERY IMPRESSED with the results
Custom Comp Cams bumpstick, dual springs&Ti retainers, pushrods, Kooks Stainless 1 7/8" Headers with matching 3" X-pipe, Borla Catback, K&N FIPK, and I ported the T-body to get a HEAT SOAKED 573whp and 526trq at 11.8 AFR so we could get more from it but I'm SUPER HAPPY!!!!
I'm betting if we did some pulls on a cool engine it will do 590+ all on 91* octane pump swill and N/A
AGAIN thanks to Nathan and Fresno Performance for the tune!!!!!
GREAT JOB on the tuning!!!!!
1st and 2nd gear are all but usless even if you modulate the hell out of the pedal 
12-10-2008, 10:30 PM
#6
Z06 just off a Dyno late night tuning session at Fresno Performance!
573whp/526trq N/A
A VERY Special THANKS to Nate and Fresno Performance for the Mad Scientist tuning skillz!!!
06 Z06 8850 miles and I ripped it apart and installed some goodies!
These #'s are with a 99% stock longblock only did the below mods! I decided not to change the heads and I'm damn glad it did and VERY IMPRESSED with the results
Custom Comp Cams bumpstick, dual springs&Ti retainers, pushrods, Kooks Stainless 1 7/8" Headers with matching 3" X-pipe, Borla Catback, K&N FIPK, and I ported the T-body to get a HEAT SOAKED 573whp and 526trq at 11.8 AFR so we could get more from it but I'm SUPER HAPPY!!!!
I'm betting if we did some pulls on a cool engine it will do 590+ all on 91* octane pump swill and N/A
AGAIN thanks to Nathan and Fresno Performance for the tune!!!!! GREAT JOB on the tuning!!!!!
573whp/526trq N/A
A VERY Special THANKS to Nate and Fresno Performance for the Mad Scientist tuning skillz!!!
06 Z06 8850 miles and I ripped it apart and installed some goodies!
These #'s are with a 99% stock longblock only did the below mods! I decided not to change the heads and I'm damn glad it did and VERY IMPRESSED with the results
Custom Comp Cams bumpstick, dual springs&Ti retainers, pushrods, Kooks Stainless 1 7/8" Headers with matching 3" X-pipe, Borla Catback, K&N FIPK, and I ported the T-body to get a HEAT SOAKED 573whp and 526trq at 11.8 AFR so we could get more from it but I'm SUPER HAPPY!!!!
I'm betting if we did some pulls on a cool engine it will do 590+ all on 91* octane pump swill and N/A
AGAIN thanks to Nathan and Fresno Performance for the tune!!!!!
GREAT JOB on the tuning!!!!!
