Doug's Headers Cut-out Rant
Thread Starter
On The Tree
iTrader: (3)
Joined: Mar 2006
Posts: 143
Likes: 0
From: Fontana, California
Doug's Headers Cut-out Rant I have been told by a few muffler shops that Doug's headers makes the best electric cut-out. The cut-out is a guilotine type instead of a butterfly type opening. Problem is they have the patent on them and so far have been a pain in the *** to get. I ordered one from them in February and have yet to receive it. They have claimed manufacturing problems. Every two weeks they say in two weeks 
. I want what is supposed to be the best but about to say to hell with them . Anyone else have any experience with them? BTW Doug's Headers is not Doug Thorley Headers they are two different companies.
. I want what is supposed to be the best but about to say to hell with them . Anyone else have any experience with them? BTW Doug's Headers is not Doug Thorley Headers they are two different companies. is this what you're talking about?
http://www.summitracing.com/parts/DOU-DEC300/
summit says they can ship it today.
http://www.summitracing.com/parts/DOU-DEC300/
summit says they can ship it today.
is this what you're talking about?
http://www.summitracing.com/parts/DOU-DEC300/
summit says they can ship it today.
http://www.summitracing.com/parts/DOU-DEC300/
summit says they can ship it today.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo http://marylandspeed.com/dmh-low-pro...ut-p-1313.html
They fit anywhere. You weld them right on to any section of straight pipe.
I have been told by a few muffler shops that Doug's headers makes the best electric cut-out. The cut-out is a guilotine type instead of a butterfly type opening. Problem is they have the patent on them and so far have been a pain in the *** to get. I ordered one from them in February and have yet to receive it. They have claimed manufacturing problems. Every two weeks they say in two weeks . I want what is supposed to be the best but about to say to hell with them . Anyone else have any experience with them? BTW Doug's Headers is not Doug Thorley Headers they are two different companies.
. I want what is supposed to be the best but about to say to hell with them . Anyone else have any experience with them? BTW Doug's Headers is not Doug Thorley Headers they are two different companies.konis are in back order till may as well
I second for DMH! I waited a month for them when I ordered them but it was worth it. They didnt fit because of ground clearance so I sold them but they were top notch and Ive seen them last a lot longer than other brands. Their motors last a long time and they blade seals very well.
I second for DMH! I waited a month for them when I ordered them but it was worth it. They didnt fit because of ground clearance so I sold them but they were top notch and Ive seen them last a lot longer than other brands. Their motors last a long time and they blade seals very well.
Cut outs those are the best working cutouts / we used to header coat all of them for the original designer of them here in Riverside until he started making them out of stainless and then sold the design to Doug's
( which he used to work for ) A NICE piece !
Thread Starter
On The Tree
iTrader: (3)
Joined: Mar 2006
Posts: 143
Likes: 0
From: Fontana, California
Update. I called Gary's drop shop in Ontario on monday to see if they maybe had one. They told me to call another shop. That shop had a single one in stock
. I called the shop that I had the order in to tell them. I told them that I had found the cut-out! They had me check the part number and it was the same. They ordered it and had it shipped ups from Riverside. Long story short I got it Tuesday . Today or saturday I will get it installed. FINALLY!
. I called the shop that I had the order in to tell them. I told them that I had found the cut-out! They had me check the part number and it was the same. They ordered it and had it shipped ups from Riverside. Long story short I got it Tuesday . Today or saturday I will get it installed. FINALLY! 