CA Smog question
#1
CA Smog question
Can I put the CNC LS6 heads, LS6 cam (or hotcam), and an LS6 intake (EGR delete) on my otherwise stock LS1 99SS and after a good dyno tune still get through smog?
I'm trying to figure out how to get more power while still passing visual and smog. I thought about going P1SC or STS, but I know I'll need to get at least $5000 just in parts and by the time its installed and tuned I'm upwards of $7k and with 113,000 on my motor I figured I'd end up having to replace that shortly thereafter if I go boosted. So I figure LS6 conversion (essentially) is about my best bet if it will pass smog.
Thoughts?
I'm trying to figure out how to get more power while still passing visual and smog. I thought about going P1SC or STS, but I know I'll need to get at least $5000 just in parts and by the time its installed and tuned I'm upwards of $7k and with 113,000 on my motor I figured I'd end up having to replace that shortly thereafter if I go boosted. So I figure LS6 conversion (essentially) is about my best bet if it will pass smog.
Thoughts?
#2
On The Tree
iTrader: (13)
Join Date: Nov 2005
Location: Union City, CA
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
You're already screwed for smog if you delete EGR. Your best bet is to stay with the forced induction idea. Just save up and don't rush into it.
I think it's a waste of money to do and LS6 conversion. There are much better choices out there.
I think it's a waste of money to do and LS6 conversion. There are much better choices out there.
#6
TECH Fanatic
im in so cal and passed smog twice in my 99SS.
ported heads 10.6:1CR, 222/224 .566/.568 114, LS6 intake, no egr, no a.i.r,
FLP headers, high flow cats, stock SLP cat back. 400rwhp 375 rwtq.
like you said.... get the sensors deleted and ask around for a cool smog shop.... i found one.
good luck.
ported heads 10.6:1CR, 222/224 .566/.568 114, LS6 intake, no egr, no a.i.r,
FLP headers, high flow cats, stock SLP cat back. 400rwhp 375 rwtq.
like you said.... get the sensors deleted and ask around for a cool smog shop.... i found one.
good luck.
Trending Topics
#9
11 Second Club
iTrader: (48)
Join Date: Jan 2006
Location: Corona, California
Posts: 742
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BigDaddyBry
If I'm not mistaken, someone recently passed with 228. Can't remember if it was on XE or XER.
Search "smog" and go through the thousand or so posts regarding smog in the last month, it's bound to be there.
Search "smog" and go through the thousand or so posts regarding smog in the last month, it's bound to be there.
I passed with a 224-230 on XER but thats on an LS2 bore. The guy who bought my Black TA with the same cam passed smog as well.
#11
I never would have thought a 228 or even a 224 would have passed. I think I'll definately go that route vice an LS6 cam and see what I can get out of the car N/A. I'm just not ready to dump over 10$ into the car right now and go boosted.
So it sounds like, with the right tune, a 224-228, Ls6 intake, and LS6 based heads I should be able to get through smog and visual.
As far as the heads go, can I get with stage 2 or will I need to keep it basically stock?
So it sounds like, with the right tune, a 224-228, Ls6 intake, and LS6 based heads I should be able to get through smog and visual.
As far as the heads go, can I get with stage 2 or will I need to keep it basically stock?
#13
So any thoughts about what the most RWHP I can get out of an N/A LS1 and still pass CA Smog and Visual?
What about the heads, stick with CNC'd ls6's (the one on GMPartsdirect) or go up to stage II LS6 heads from an aftermarket company?
I think I want the 114 LSA anyway, I don't want it too lopey, but I hadn't thought about the total overlap.
What about the heads, stick with CNC'd ls6's (the one on GMPartsdirect) or go up to stage II LS6 heads from an aftermarket company?
I think I want the 114 LSA anyway, I don't want it too lopey, but I hadn't thought about the total overlap.
#15
TECH Fanatic
So any thoughts about what the most RWHP I can get out of an N/A LS1 and still pass CA Smog
#16
On The Tree
iTrader: (5)
Join Date: Nov 2003
Location: S. Cali
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by M6HuggerSS
id guess 415-430rwhp. being i passed with 400rwhp and my smog tech said i still had some room for a bigger cam.......hmmm
#18
TECH Fanatic
400 rwhp in CA in NOOOO prob.....
if i had to do a H/C car again.... id get better heads ..... some AFR 205's....with
around a 11.2:1CR, and id go with somthing near a 224/228 .581/.581 112.
then do a 90/90FAST combo.... UD pulley, LT's, no cats, and a cut-out and you might
see 430rwhp.... then for smog time, just throw on some NEW cats., and at the worst case, have it detuned a little......
good luck guys!
if i had to do a H/C car again.... id get better heads ..... some AFR 205's....with
around a 11.2:1CR, and id go with somthing near a 224/228 .581/.581 112.
then do a 90/90FAST combo.... UD pulley, LT's, no cats, and a cut-out and you might
see 430rwhp.... then for smog time, just throw on some NEW cats., and at the worst case, have it detuned a little......
good luck guys!
#19
FormerVendor
iTrader: (15)
Join Date: Jun 2006
Location: Los Angeles, CA
Posts: 2,689
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by M6HuggerSS
400 rwhp in CA in NOOOO prob.....
if i had to do a H/C car again.... id get better heads ..... some AFR 205's....with
around a 11.2:1CR, and id go with somthing near a 224/228 .581/.581 112.
then do a 90/90FAST combo.... UD pulley, LT's, no cats, and a cut-out and you might
see 430rwhp.... then for smog time, just throw on some NEW cats., and at the worst case, have it detuned a little......
good luck guys!
if i had to do a H/C car again.... id get better heads ..... some AFR 205's....with
around a 11.2:1CR, and id go with somthing near a 224/228 .581/.581 112.
then do a 90/90FAST combo.... UD pulley, LT's, no cats, and a cut-out and you might
see 430rwhp.... then for smog time, just throw on some NEW cats., and at the worst case, have it detuned a little......
good luck guys!