LS1BLKSS

iTrader: (36)

I have been doing this mod for a very long time now! i bet you can do it a few hours but i just wanted to take my time and do it right! everything came out perfect... the only thing i didn't like was when i put the plastic clear cover back on... i wet sanded and buffed them out but they still look a lil yellow and not as clear as my other set of headlights! when i was putting them on i noticed that i put the black gasket upside down!! meaning when i put them on there was a mean o gap between the lights and the front bumper! so i have to take off the gasket and turn it around so there won't be a gap!

Clear headlights with amber side markers Vs. Whistler mod and black side markers
which ones look better????



here you can see the gap lower part of the headlight

94'BLKBRD

iTrader: (76)

I like the clear headlight/orange side marker on black camaros.I just bought a black z28 and was thining about doing the whistler mod.

*98TransAm*

the Whistler mod and black side marker looks badass

94'BLKBRD

iTrader: (76)

what did you use to buff the headlight?

LS1BLKSS

iTrader: (36)

i don't know! they both look really good!!! i think im going to drive it like this **** it!!! lol

nhra-trans-am

iTrader: (103)

whistler/black signals

LS1BLKSS

iTrader: (36)

i wet sanded them with 1000 and i used 3M rubbing compund and it turned out good but i really wanted them to look like my other set so i went and bought this "CLEAR HEADLIGHT" cream at Autozone and i tried it out in a lil area and it didn't clear them up!

94'BLKBRD

iTrader: (76)

I wetsanded mine with 1000 and 2000 grit sandpaper,then I buffed them using Turtle Wax Rubbing Compound and Fine Scratch Remover.I finished them off with some Meguiar's PlastX.

I'll post before and after pics in a lil bit.

00SSLS1

iTrader: (7)

use meguiar's plastic-x to clean them up, my headlamps were really yellow and this helped

94'BLKBRD

iTrader: (76)

PlastX on helps to give them a shine not to get rid of the yellow **** on the headlight.If you want to get rid of the yellow stuff you need to wetsand it at a high grit(1000-2000) and then buff them.

94'BLKBRD

iTrader: (76)

Did you buff them by hand?

LS1BLKSS

iTrader: (36)

no i used my porter cable i don't have a high speed yet!

LS1BLKSS

iTrader: (36)

yes i would love to see before and after pix!!

94'BLKBRD

iTrader: (76)

I used a drill and buffing wheel....im not 100% satisfied but way better than how they were.I got got kind of lazy after I had spent 6+ hours cleaning the interior.I think im going to re do it some other day.

LS1BLKSS

iTrader: (36)

you should've tired it with the porter cable buffer with the yellow pad

The Guz

iTrader: (8)

Both look good. But the whistlers and black corners now flow with the black 10 spokes you have.

94'BLKBRD

iTrader: (76)

Before:





After:Pic is not that great,took it with my cellphone

BigDaddyBry

iTrader: (15)

What'd you do with the fish that were living in there? j/k

That's a dramatic difference in Before vs. After.

94'BLKBRD

iTrader: (76)

The couple that owned the car didn't take car of ****! Interior and exterior are ******* dirty.....Can't complain to much I got the car for a good price.

$5,700...98 120k freeway miles

LS1BLKSS

iTrader: (36)

damn thats cheap!!! and its black??? ****!!! i should've found it before you!!!