MySuperSportCamaro

iTrader: (1)

Just got my wheels today and wanted to ask what your choice would be on these wide C5 deep dish rims and what mods needed . Going on a 96 Camaro SS. Thanks

JBIRD02

iTrader: (4)

If it was me, I'd run a 315/30/18. Some people have had to roll the fenders or take a bfh to the innner fender wells to get them to fit, while others havent. You could run a 295/35/18 or a 305/35/18, but the 305 is a little taller than the other 2. Do a search for some of these sizes and you'll get a better idea of what looks good to you.

vanilla89

iTrader: (8)

i run a 335/30/18 nitto d/r on a 18x10.5 with 56mm b.s..had to bfh the inner fender well a lil.

Xsta Z 28

iTrader: (2)

On a Camaro, since the wheel well is a tad smaller than a Firebird, I recommend a 295/35ZR18

michaelg589

iTrader: (1)

I agree. i have 295-35 KDW2s on my 18x10.5s and they look great. the fit was OK. i did BFH mod a little.

Z'mnypit

iTrader: (58)

Same here, Running a 295/35/18 BFG KDW 2 on my 18/10.5. Had to BFH a little but so far no issues.

Brian2006

iTrader: (42)

I just went with 305/35/18 Nitto drag radials on my 18x10.5" 5mm wheels. Had to BFH and roll my fenders:

Z06.0

i have bfgs and i dont like them, they look skinny, they hook nice though

JBIRD02

iTrader: (4)

Looks good!
Is that the bfh laying on the ground?

Brian2006

iTrader: (42)

That's what I first tried. Rubber mallet didn't do ****! I upgraded to a sledgehammer (lightly)