jerflash

how do these tires fit? are they about the same "actual" size as say the mickey 315/30/18. i would just get the mickeys but im looking for something with better street wear.

does anyone have these tires?

thanks guys

ronzss

I was also wondering about that size.. dont mean to thread hijack but i have 18x10.5 z06 rims.. and was wondering about the 335 since they run smaller as most people say..

jerflash

i was thinking the exact same thing...i was going to get the 18x10.5s in black and those tires would rock...i think with a small spacer and since the ws6 has a larger fender space compared to the camaros i thik we could get away with the 335 since im not lowering my car...if i have to roll the fender then i will i dont mind that so much.
they come with a +56 offset on ebay so to not rub inside they would need a slim spacer

4SFEDZ

iTrader: (6)

here are 335's on my 18x10.5

jerflash

they dont seem to buldge that bad at all...about the same as my 275 KDs on the stock 17x9s lol. whats the offset on the rims and how much massaging did you need to do to fit them?

thanks for the pics

ls1ow

iTrader: (2)

are you blind???

those bulge horribly, that is way too much tire for that wheel size.

jerflash

to each there own guy...i dont think it looks dangerous lol

allbaugh_04

iTrader: (6)

it's called rim protection, and i think they look great

ls1ow

iTrader: (2)

don't get me wrong I'm all for having as much tire as you can under a car, i have 345s on my Vette but i also have a 12.5 wide wheel to do it safely

tbird31

iTrader: (22)

I'm with this guy. ^^^

That is a horrible buldge on those Z06s. Those are 10.5" rim the biggest tire you should really even think about putting on that rim would be a 315 and that's still out of it's safety recommendation rage. Primarily a 305 would be what you'd want.

For a 335 tire to be run "safe" you need to run a 11.5" wheel. I contemplated putting a 335 on my 11" wheels but went against it because of the "cloud like" sensation you'd feel in the corner, plus I just think bulge looks bad...that's just me though.

Eskimo

iTrader: (9)

x3 on them being too wide for that wheel.

thechef

iTrader: (13)

Jerflash...i run 305s on my ws6....let me know if you do these id like to see them in person

jerflash

actually i think i made up my mind chef...im going with the Torq-Thrust M Anthracid color rims 17x10.5 in the back. 18inch tires are just way to expensive lol and then i can run a mickey 315 in the back no problem...the new style looks like the could handle pretty good in the rain lol

slowbrakiller

iTrader: (10)

that'll look great, who knew mustang wheels would be such a hit on our cars

Cvaught

iTrader: (13)

I love my new anthracite TTM's. They really do look great on an F-body. Just for reference, here is what a wide 315 will look like on your TTM's. In my opinion, there is little buldge.

jerflash

they are great lookin rims and cheap as hell where i am getting them from
that color with go good with my red and silver color scheme

jerflash

there is a little buldge with the mickeys on the 10.5 rims i think also..the recomended tire rim size for the mickey 315s is 11-12 inch so its only 0.5 off thats cool with me. the rim size for the nitto 315 is 10.5-12. overall width on the mickey is 12.7 and the overall width on the nittlo is 12.16...thats how skinny the nittos are lol

4SFEDZ

iTrader: (6)

actually, they felt really good on corners. they hooked good to.

jerflash

hey Cv did you have to do any BFH or rolling to fit those 315 under there on those times and offset?

Cvaught

iTrader: (13)

Not one bit, but I am still on stock suspension.