18x11.5 iForged w/ 335/30 Michelin Pilots
06-21-2003, 12:15 PM
#1
Launching!
Thread Starter
Join Date: Feb 2002
Location: Cortland, OH
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
18x11.5 iForged w/ 335/30 Michelin Pilots I FINALLY got the wheels and they are on the car but it is now raining so I can't get any good pics so I took a few with the car in the garage.
The wheels turned out great except for the fact that for some reason they built my front wheels with a 1" lip. WTF is up with that!?!
I did get to drive the car lasts night and the tires rub a little on the inner fender wells whe cornering hard so I will hae to do the BFH mod.
Just click the link in my sig and go to new misc. pics.
I aso installed Hooker haders w/ offroad pipe, MSD wires and NGK plugs anddd te wire relocation mod during te LONG wai for my wheels.
The wheels turned out great except for the fact that for some reason they built my front wheels with a 1" lip. WTF is up with that!?!
I did get to drive the car lasts night and the tires rub a little on the inner fender wells whe cornering hard so I will hae to do the BFH mod.
Just click the link in my sig and go to new misc. pics.
I aso installed Hooker haders w/ offroad pipe, MSD wires and NGK plugs anddd te wire relocation mod during te LONG wai for my wheels.
06-22-2003, 12:59 AM
#2
TECH Fanatic
Join Date: Apr 2002
Location: Texas
Posts: 1,869
Likes: 0
Received 0 Likes
on
0 Posts
Re: 18x11.5 iForged w/ 335/30 Michelin Pilots Looks sweet! Sucks they built the fronts with such a small lip, especially since the rears have a huge one. what is the backspacing on the rear wheels? better stock up on those michelins, heard some rumors they wont be $150 for much longer 
06-22-2003, 01:48 AM
#3
TECH Resident
Join Date: Nov 2001
Location: Kaiserslautern, GE
Posts: 781
Likes: 0
Received 0 Likes
on
0 Posts
Re: 18x11.5 iForged w/ 335/30 Michelin Pilots Do the rears stick out past the fender a little? It looks close, but I'm sure it's the angle, right? Nice wheels.
? Well i'm liking how they look on everyone's cars so heres a thumbs up for you. 
06-22-2003, 06:40 PM
#7
TECH Regular
iTrader: (3)
Join Date: Mar 2003
Location: LAFAYETTE, INDIANA
Posts: 465
Likes: 0
Received 0 Likes
on
0 Posts
Re: 18x11.5 iForged w/ 335/30 Michelin Pilots
Those are awesome untill I seen the $800/ piece price tag... I thought Fikses were expensive 
if so, that is iforged's "suggested retail"
Trending Topics
06-23-2003, 07:19 PM
#10
Senior Member
iTrader: (24)
Join Date: Nov 2001
Location: Tampa, FL
Posts: 6,034
Likes: 0
Received 0 Likes
on
0 Posts
Re: 18x11.5 iForged w/ 335/30 Michelin Pilots
Those are awesome untill I seen the $800/ piece price tag... I thought Fikses were expensive
if so, that is iforged's "suggested retail"
06-24-2003, 06:51 AM
#11
Launching!
Thread Starter
Join Date: Feb 2002
Location: Cortland, OH
Posts: 216
Likes: 0
Received 0 Likes
on
0 Posts
Re: 18x11.5 iForged w/ 335/30 Michelin Pilots I got a special deal on the set on a partial sponsorship directly from iForged. There are a few sponsors at corvetteforum.com that sell them and Trilogy says to try the wheel boutique forood prices. As with anything, I am sure it would help to shop around.
Andy, it was good meeting you too. Your car was awsome, extremely well detailed and I loved the engine bay, I REALLY need to get started on mine.
Andy, it was good meeting you too. Your car was awsome, extremely well detailed and I loved the engine bay, I REALLY need to get started on mine.
